Question about 1969 Chevrolet Chevrolet 350 cu
I have a 3 speed on the column in my 69 c10. Every now and again I have an issue with putting it in gear when I first try to start off. Usually if it want go into first I can put it in 3rd shift into 2nd and then to 1st. I'm not positive if it is the clutch or maybe something with the gears
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
AS YOUR CAR IS VERY OLD. THE ENGINE PARTS MUST BE VERY OLD. IN THIS SITUATION EVERY CAR DOSENT WORKS PROPER WHEN THE ENGINE BECOMES HOT. YOU JUST NEED TO CHECK AT CHEVY SERVICE CENTER FOR A BETTER SOLUTION. THEY WILL HELP U BETTER AFTER CHECKING YOUR CAR PERSONALLY.
PLS. RATE MY SOLUTION.
Posted on Feb 12, 2009
i got a 1996 chev. blazer s-s10 4.3 engine 4x4.problem i got is i got 1st 2nd & overdrive & reverse but no 3rd gear what should i do
Posted on Jan 19, 2010
Drop the pan, odds are the shift solenoid is out, its located at the front of the trans on the driver side. I'm sure your check engine light is on that will comment about the timing/shift solenoid being bad. I had the same problem with mine. The solenoid had plastic coming out of the inside. To remove it you'll find a small C clip holding it in, just take a small screw driver and pull the clip out. The part cost me like $36 from my local dealership. And its a longer solenoid. I believe its the 3-2 downshift solenoid. I do have the part number if you need it.
Posted on Apr 25, 2010
Testimonial: "Thank you so much. I actually thought this was the problem, but i didn't know. Thanks again!! send me the part number"
Tips for a great answer:
Jan 10, 2016 | Cars & Trucks
Sep 21, 2014 | 1969 Pontiac Firebird
Sep 19, 2014 | Cars & Trucks
Jul 17, 2013 | Cars & Trucks
car not changing gears it can be shifter assembly issue, or it can also be
transmission issue. Get the shifter assembly inspected with ignition OFF.
more troubleshooting, I suggest you to get the Following help link checked, its
complete step by step procedure to inspect gear shift issues: -----
GEAR SHIFT ISSUES
These will help.
Feb 15, 2013 | Cars & Trucks
Feb 02, 2013 | 1998 Chevrolet C1500
Aug 12, 2009 | 1998 Chevrolet Lumina
Jul 07, 2009 | 2008 Chevrolet Cobalt
Apr 02, 2009 | 1997 Ford Expedition
Jun 06, 2008 | Chevrolet 1500 Cars & Trucks
60 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: