Question about Chevrolet Cars & Trucks

Open Question

1985 Suburban 350 belt diagram - Chevrolet Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ward_knutson
  • 64 Answers

SOURCE: Need a diagram for a

I found a belt routing diagram for you at: http://www.2carpros.com/car_repair_information/tec_info/1993/chevrolet/suburban/1993_chevrolet_suburban_drive_belt_routing_diagram.htm

I hope this helps!

Posted on Nov 26, 2008

  • 3 Answers

SOURCE: I need a vacuum line

thanks fasteddie383, i had already checked with the library (actually, i've checked three different LARGE libraries, no luck!) i've even had two different friend's that i went to school with check around @ the two GM dealership's where they work-one's the service manager, the other's the shop foreman-no luck! i thought about looking @ those sites that charge a fee for a year's worth of access, but they have no guarentee i can find what i'm looking for, and no refunds.
as for our "guest" on Jan.02........"i have a 86 2.5 liter , i dont know the vacuum routing and i with i knew where fuel pump prime wire terminates within the vehicle. "????? what the hell?......first you're talking about a 2.5 (4 cylinder) that's in (eithier) a S-series Blazer/Jimmy, or p/u............did you not see that it's for a Suburban with a 350. different truck and different engine equals different diagram, but thanks anyways.

Posted on Feb 26, 2009

csmock132
  • 4669 Answers

SOURCE: horse power and torque of a 350 cu/in 1985 chevy suburban motor

I'm not sure of the exact horsepower because of a lot of variable like condition of the engine and age and fuel system and transmission. But if this vehicle as a 350 in it, It will be fine to pull your boat. Even if it was a 305 it would be o.k

Posted on May 23, 2009

csmock132
  • 4669 Answers

SOURCE: fusible link locations on a 1985 suburban 350 4x4

Attached to the big bolt on the starter.

Posted on Jul 01, 2009

RJones1125
  • 373 Answers

SOURCE: Belt routing diagram for 1985 lincon town car.

The routing schematic for the serpentine belt is usually found on the fan shroud. But, if yours is missing you may contact your local lincoln dealer to see if they have the decal for that vehical or that engine.

Posted on Oct 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i find a belt diagram 1985 350 5.7L with air?


Do a search on goggle and it will show you the correct routing for the belt. Just put your make, model and engine size in and you can see the routing. Hope this helps.

Jul 06, 2014 | 1985 Chevrolet Sportvan G30

1 Answer

I have a 1988 suburban and im in the proess of rewiring with wires from an 1985 suburban will this work


You will have a lot of work ahead of you. A 1985 and a 1988 are 2 different designed trucks. The 1985 harness is only compatable up to and including 1987. The 1988 harness would be compatable from 1988 up to I think 1997, 1994 for sure. You could make it work if you had a GM wiring diagram for both vehicles but I think you would be better off looking for a newer harness. Hope this helps.

Oct 01, 2011 | 1988 Chevrolet Suburban

1 Answer

Nedd blt routing diagram for this truck 350 engine


Chevy 350 Engine (V8, 350 cid, 5.7L) for C / K Series, as Suburban sample, check in this link the right diagram: diagrams/chevrolet/suburban/2000

Hope helps (remember to rate this answer).

Apr 01, 2011 | Chevrolet Crew Cab Cars & Trucks

1 Answer

Need belt diagram for 1987 suburban 350 ci with ac


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1987/make/chevrolet/model/suburban/1987_chevrolet_suburban_drive_belt_routing_diagram.htm

Nov 19, 2009 | 1987 Chevrolet Suburban

1 Answer

Vaccum hose diagram for 88 chevy truck. I put a 350 motor in my 88 chevy 1500 truck from a 95 suburban. I cant get the throttle body to stop idaling to high. I may need a vaccum line diagram for this motor...


it may not be a vacumn leak from a line,check the throttle shaft for movement,for example,i had a 89 1 ton 350 and my throttle shaft was moving around a lot and in order to keep it from idling high,i had to kick the throttle pedal.But also check the idle air control valve,which is the round sensor on the side of the throttle body.

Sep 10, 2009 | 1985 Chevrolet Chevy

1 Answer

Horse power and torque of a 350 cu/in 1985 chevy suburban motor


I'm not sure of the exact horsepower because of a lot of variable like condition of the engine and age and fuel system and transmission. But if this vehicle as a 350 in it, It will be fine to pull your boat. Even if it was a 305 it would be o.k

May 23, 2009 | 1985 Chevrolet Suburban

2 Answers

I need a vacuum line routing diagram for a 1985 GMC Suburban. 2wd, with a/c, 5.7liter (350), 4bbl carb, Can anyone help


believe it or not your local library will have the vacuum diagrams in mitchell books or some book similar. if not find a local repair shop with all data and they will be able to look it up for you and print it. if that fails you can access all data on the internet and get access for 1 car for i think like $12 dollars. its good for a year so its well worth it.

Aug 03, 2008 | 1991 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...