Question about Cars & Trucks

Open Question

1997 infinity q45\no reverse

P0750 p0755

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: 1992 infiniti q45

motor run ruff and will not ideal

Posted on Aug 13, 2008

MNfisherman
  • 11896 Answers

SOURCE: P0700, P0750 and P0755 codes

Trouble Code: P0750

A/T Low/Reverse Solenoid Circuit Failure
Possible Causes:


L/R solenoid control circuit is open or shorted to ground L/R solenoid control circuit is shorted to system power L/R Solenoid is damaged or has failed TCM or PCM has failed
Trouble Code: P0755

A/T 2/4 Solenoid Circuit Failure
Possible Causes:


2/4 Solenoid control circuit is open or shorted to ground 2/4 Solenoid control circuit is shorted to system power 2/4 Solenoid is damaged or has failed TCM or PCM has failed

Trouble Code: P0700

Automatic Transmission Control System Malfunction
Possible Causes:


The presence of this code means the TCM detected a problem TCM related Sensor has solenoid is damaged or has failed This code is for information only - check for other TCM codes TCM or PCM has failed

Posted on Oct 14, 2009

  • 52 Answers

SOURCE: 1998 infiniti qx4

shift solonoid b is in the transmission. not a do it
yourself situation. clear the codes and drive , see
if it comes back before you take it in for repair.

also check wiring going to trans. look for broken
wires and wires that are rubbed through

Posted on Nov 22, 2009

johnjnail
  • 1702 Answers

SOURCE: 1997 Q45 INFINITY, TROUBLE CODE U3FFF, TCS off

i am not sure were or how you got that code. there are no trouble codes starting with a U or ending with any letter all engine performance codes will start with a P and then 4 numbers all ABS/TCS codes will be only 2 numbers and cant be retrieved with a code reader they must be retrieved by means of a test procedure i can get the procedure for you if you want it i will need your e-mail to send it to because fixya does not have enough space to post it on there sight.

Posted on Apr 10, 2011

nicole99wu
  • 1049 Answers

SOURCE: i need to find out what the codes mean for a test

here is a Diagnostic Trouble Code Table, hope it can help you

Posted on May 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the 1997 infiniti q45 rod bearing cap bolt torque?


I have had good luck with AUTOZONE.com click on repair help and specs. I tried it for your car and it gives the details torque plus turn method . Hope this helps.

Jul 11, 2013 | 1997 Infiniti.5 Q45

2 Answers

2001 hyundai santa fe transmission went into neutral mode,and won't engage gears until turning off car for few minutes,and driven about 100 yards continues.Came up with diagnostic codes...


Hello, all your codes are related to transmission shift solenoid circuit condtion eg: Transmission > Automatic Transaxle > P0750 Low and Reverse Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0755 Underdrive Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0760 Second Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0765 Overdrive Solenoid Valve Circuit - Open or Short(GND). Wether your vehicle is equipped with a 4 cylinder or v6 ,all the codes are for either engine models. Check your main wire harness that plugs into the top of the transmission and verify,that a good connection is present. if all looks ok and the vehicle still exibits the same symptoms. The problem may also be in the ECM/TCM control module itself. A Hyundai dealer would have the proper scan tool and tester to verify and perform actuation tests on the shift solendoids themselves to make sure they are working correctly. This does not mean that the transmission itself has failed. You basically have an open circuit somewhere that the solenoids are not getting a good ground. Hope this helps.

Jan 31, 2011 | Hyundai Santa Fe Cars & Trucks

1 Answer

No lights working on dash and console of my 1997 infinity q45. cant locate fuse box to check fuse.


usually located drivers side behind kick panel or on lower portion dash..

Sep 02, 2010 | 1997 Infiniti.5 Q45

1 Answer

1997 q45 BACK LIGHTS STAY ON. wHY?


Hello! The inhibitor switch needs to be adjusted or replaced...It is located on the manual control linkage of the automatic transmission shifter...The inhibitor switch has two "jobs"...#1 it acts as a starter relay and #2 it turns on your back-up lights...That portion of the switch (pins 3 and 8) wire colors Green/Black and Blue/White is staying closed...Guru......Saailer

May 06, 2010 | 1997 Infiniti.5 Q45

2 Answers

P0700, P0750 and P0755 codes I was driving at 65 mph and the 2003 Dodge Caravan down shifter to low gear and the check engine light came on. It will not ship to high gear.


P0700 (M)
Check Transmission DTC's
This code indicates that the EATX (Transmission controller) has an active fault and has illuminated the MIL via a BUS message. The specific fault must be acquired from the EATX via a DRBIII tool. (Input or Output Speed Sensor failures often cause this code and are a common failure part on WJ Grand Cherokees

P0750
Shift Solenoid circuit.
Note: If code P1767 (Transmission Relay Always On) is also present: Replace transmission solenoid assembly. See note provided. When transmission is in limp mode the relay that provides power to the solenoid group is switched off. This is normal and is designed to provide operation in one gear only. Engineering department suggests to replace transmission solenoid assembly anytime these two trouble codes occur together. See applicable service manual section (21) for solenoid assembly replacement directions. IMPORTANT: When performing this repair always check torque on all valvebody accumulator cover plate screws. Proper torque specification is 70 inch pounds. If any accumulator cover plate screws are damaged or missing replace the valvebody assembly. NOTE: If any other trouble codes are present do not replace solenoid assembly. See test in the applicable Transmission Diagnostic Procedures Manual

P0755
Shift Solenoid B

Oct 14, 2009 | 2003 Dodge Caravan

1 Answer

Over drive light flashes when driven at 70 mph steady i stop shut the car off and start it again light is off but the transmission shifts hard leave the car over night and its fine codes that came up where...


P0743 is Torque Converter Clutch solenoid circuit failure during self-test.
P0750 is SS1(shift solenoid) solenoid circuit failure.
P0755 is SS2 solenoid circuit failure.

Sounds like you are having an intermitant electrical failure to the tranny. Check the connector at the Tranny and make sure you don't have a loose connector and check it for corrosion.Trace these 3 wires back GN/WH, GN/Y, and GN/O. these go back to a splice then go into one wire GN/Y and then to the PCM relay in the engine compartment fuse panel. Make sure that this harness is not chaffing on metal somewhere or maybe the splice is going bad.You can try and overlay it from the relay to one of the 3 wires at the tranny connector and see if this solves the concern.

Mar 04, 2009 | 1997 Ford Contour

1 Answer

1992 infiniti q45


motor run ruff and will not ideal

Jun 24, 2008 | 1997 Infiniti.5 Q45

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...