Question about 2001 Pontiac Montana

Open Question

Vacuum hose diagram throttle can find the were to connect on the back of the engine

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jturcotte
  • 7726 Answers

SOURCE: I need a diagram for

Hi, please let me know if you have any questions, and thanks for using FixYa.

jturcotte_1947.gif

Posted on Jul 17, 2011

  • 16 Answers

SOURCE: somebody has completely removed All vacuum hoses on my girlfrnds 2002 pontiac grand am v-6 & I need to know where they all go???

There should be a basic diagram under the hood. Many shop manuals don't have much better. Your best bet might be to call around to junkyards, see if they have one, and go in the yard and look. They are pretty good about that if you just buy something like a cigarette lighter or something. Basically brakes get full vacuum, PCV valve is next, then the A/C ductwork is smaller and shares with the charcoal canister. There should be no leaks. Brakes and PCV are the important ones the rest plug the leaks and go from there.

Posted on Aug 30, 2012

Testimonial: "Thank You Mark I appreciate your answer. Do you happen to know of a website that would show a picture of the emissions diagram for free?"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am missing a vacuum hose that plugs in just below the throttle body on my 2000 Wrangler 2.5L. Which hose is this and where does it go?


its laying around the engine its a black vacuum hose . in some models they dont use that connection an the connector is capped over with a rubber cap

Aug 03, 2014 | 2000 Jeep Wrangler

1 Answer

Need a vacuum hose routing diagram for a 99 VW Beetle 2.0


VACUUM LINE DIAGRAMS


There are few direct links showing exact vacuum line diagrams. I suggest you to refer the direct links.


Click the link below: -----

---------------

How to locate the vacuum leak?

http://howtobyme.blogspot.in/2012/01/how-to-locate-vacuum-leak.html

-----------------

Vacuum Hose Routing Diagram For 1995 Chevrolet Corvette Throttle Body?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html

------------

VACUUM DIAGRAMS For Audi A4?

http://repairhelpcenter.blogspot.com/2011/11/vacuum-diagrams-for-audi-a4.html

--------------------

VACUUM DIAGRAMS For VW Passat?

http://vwrepairhelp.blogspot.com/2011/11/vacuum-diagrams-for-vw-passt.html

-------------

Vacuum line diagram For 1996 Chevrolet Lumina?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-line-diagram-for-1996-chevrolet.html

--------------

Vacuum Hose Routing Diagram For 1995 Chevrolet Corvette Throttle Body?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html

-------------

Vacuum diagram for Isuzu?

http://technoanswers.blogspot.com/2012/01/vacuum-diagram-for-isuzu.html

-------------

Ford 4 wheel drive vacuum solenoid working system?

http://technoanswers.blogspot.in/2012/02/ford-4-wheel-drive-vacuum-solenoid.html

------------

These will help.

Thanks.

Dec 06, 2012 | 1998 Volkswagen Beetle

1 Answer

R & R motor and where do the vacum lines


There re few direct links showing exact vacuum line diagrams.I suggest you to refer the direct links.

Click the link below:-----
---------------
How to locate the vacuum leak? http://howtobyme.blogspot.in/2012/01/how-to-locate-vacuum-leak.html

-----------------
Vacuum Hose Routing Diagram For 1995 Chevrolet Corvette Throttle Body?

http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html

------------


VACUUM DIAGRAMS For Audi A4?

http://repairhelpcenter.blogspot.com/2011/11/vacuum-diagrams-for-audi-a4.html

--------------------
VACUUM DIAGRAMS For VW Passat? http://vwrepairhelp.blogspot.com/2011/11/vacuum-diagrams-for-vw-passt.html
------------- Vacuum line diagram For 1996 Chevrolet Lumina? http://schematicsdiagram.blogspot.com/2011/12/vacuum-line-diagram-for-1996-chevrolet.html
-------------- Vacuum Hose Routing Diagram For 1995 Chevrolet Corvette Throttle Body? http://schematicsdiagram.blogspot.com/2011/12/vacuum-hose-routing-diagram-for-1995.html
------------- Vacuum diagram for Isuzu? http://technoanswers.blogspot.com/2012/01/vacuum-diagram-for-isuzu.html


-------------
Ford 4 wheel drive vacuum solenoid working system? http://technoanswers.blogspot.in/2012/02/ford-4-wheel-drive-vacuum-solenoid.html

------------
These will help.
Thanks.

Nov 26, 2012 | Cars & Trucks

1 Answer

How to connect vacuum hose from/to air filter - Camry 2003


Usually you wouldn't connect a vacuum hose to the air filter, but if its a DIY job your after you would need to get the male connectors and some other hardware to do a custom job (drilling required) otherwise to have the same effect you could just connect a vacuum hose to the Intake Manifold or throttle body.

The Intake manifold usually has some spare slots for small vacuum hoses.

To locate follow the air filter box tube back to the throttle body, the throttle body, the intake is directly off this and connects to the engine. see diagram

Oct 24, 2012 | 1992 Toyota Paseo

1 Answer

Vacuum diagram for a 2004 tiburon


There is only 4 vacuum lines on that engine

1- brake booster line

2- purge line to purge solenoid (top center of throttle body)

3- PCV hose. run straight from PCV to side of intake at base of throttle body

4- fuel pressure regulator line (short small diameter hose runs from #6 intake runner to fuel pressure regulator

5- tube that connects front cam cover to rear cam cover to improve vapor venting

http://www.hyundai-forums.com/attachments/gk-tiburon-coupe-s111-2003-2008/38204d1276396353-vacuum-lines-2004-tiberon-pict0001.jpg

Jun 25, 2012 | Hyundai Tiburon Cars & Trucks

1 Answer

Vacum hoses loose, where do they go? 1990 ford f150 4.9


There was a diagram under the hood from the factory of the hoses. We do not have the diagrams.

Jun 14, 2012 | 1990 Ford F150

1 Answer

I need a vacuum line diagram fo a 1996 Chevy Lumina, 3.1. One line that is not connected to anything, is located at the top of the engine.


Sorry I don't have the diagram, but I do have a diagram of the engine and component locations. Your vacuum system is fairly simple. You have a MAP sensor attached to the air cleaner. I have pasted a picture below. It has one electrical connector and one vacuum hose that goes to the intake manifold or the throttle body.
Behind the right headlight is your evap canister. This will have a hose or line running to the fuel tank. Then it will have another hose going to the purge valve. The purge valve should be close by and it has a connector plus another hose that goes to the intake manifold.
Then you have the PCV hose that goes from the PCV valve in the valve cover to the air cleaner or intake manifold. I think yours just has a hose from the air cleaner and the rest is internal.
There is one more vacuum hose, and that is the bog one that goes from the intake manifold (or throttle body--looks to me like there are a couple of vacuum ports on the back side of the throttle body, and there may be a "T" on one of the hoses) to the brake booster. It this one was off, the engine would not run, as the vacuum draw is large. Please let me know if you cannot figure it out from these instructions and provide a picture, if you can.

MAP sensor:
jturcotte_653.jpg

purge valve:
jturcotte_654.jpg

jturcotte_2455.gif
jturcotte_2456.gif

Oct 30, 2011 | 1996 Chevrolet Lumina Mini

1 Answer

Do you know where i can find a 'vacuum diagram' for a turbo 350 transmission (1980 chevy blazer...stalls when you put it in gear)


There is usually only one vacuum connection on a turbo 350. It connects to the modulator valve on the side of the transmission. This valve uses engine vacuum to determine transmission shift points. The other end usually connects to a direct engine vacuum source. A "direct source" is a hose connection on the throttle body that has a vacuum signal available at idle. If it doesn't, then it's considered a "ported source".I have had some experience with the chevy blazer/gmc jimmy series, both the early large body models and the small body versions. The stalling when put into gear complaint is most likely caused by a bad intake gasket which is common on the older versions with the small block V8 motors. The newer versions with the vortek motors also had allot of trouble with throttle body gaskets. If these problems have not already been addressed, then there's a good chance that it will take care of the problem. Other possible sources of vacuum leaks are the pcv hose that is hard and brittle. Check the hose out carefully, especially the side that normally faces the engine. Check the throttle body bolts (carburetor bolts) for tightness. I hope that this information is helpful to you. Thank you for using Fixya.com.

Jun 07, 2011 | 1985 Chevrolet S-10 Blazer

2 Answers

Looking for a pdf. of vaccuum hoses on a 2000 focus


SPI Vacuum Diagram
spivacuumiy9.jpg

Zetec Vacuum Diagram

zetecvacuumtz6.jpg user_offline.gif SPI Vacuum Diagram
spivacuumiy9.jpg

Zetec Vacuum Diagram

zetecvacuumtz6.jpg user_offline.gif spivacuumiy9.jpg

Zetec Vacuum Diagram

zetecvacuumtz6.jpg user_offline.gif If it's equipped with the 2.0L SPI engine (eighth digit of the VIN is 'P'), the most common place for a vacuum leak on these engines, is from the PCV hose that runs from the valve cover to the back of the throttle body. Where it usually rots through is the elbow at the back where it connects to the throttle body. Hope this helps. The only place i could find any views is here. vacuum hose diagram - Focus Fanatics

Oct 29, 2010 | 2000 Ford Focus

1 Answer

Idles high after starting


Older cars tend to get vacuum leaks, either by detiorated hoses, or something being overheated, or accidently knocked off. A can of carburetor cleaner can be carefully sprayed using the extension tube, near the hoses & connections of vacuum lines to identify any leaks while the engine is running. Just spray a shot at a time near the areas (hoses, Throttle Body, Intake) in question and the engine will slow down if it sucks in the cleaner. Other than this, there's the throttle position sensor and idle control motor to test. Look around the engine compartment & be sure nothing is loose or obviously broken. There is a schematic diagram of the vacuum hoses in your engine compartment & you can check to be sure what it says is supposed to be there, is still there.

Jan 30, 2010 | 1999 Ford Escort

Not finding what you are looking for?
2001 Pontiac Montana Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...