All but one gauge light is burned out is it hard to take dash board apart? How do you go about it. I have the replacment bulbs
Actually it is pretty easy. Take the plastic off from around the base of the steering column...couple of screws. Take the plastic trim off from around the radio. Pop one edge off and then the rest you work off....it pops back in place. Next, tilt your steering wheel as far down as possible.
Remove the plastic around the the whole area in front of the dash...it really isn't much, just sounds like it. To do so, remove the fuse panel on the driver's side of the dash. Remove that screw there. That plastic "hood" that covers the gauges, trim piece, it pops right out also. Once that is removed, unscrew the instrument cluster....the screws on the WHITE tabs.
Carefully remove the instrument cluster and unplug the harness in the back....
Pretty much it!
You will laugh when you see how easy it really is once you start to put it back in. Very simple. If you have to do it again, you should be able to do it in like 10 minutes or less......and think of what the dealership would have charged you!!!!!!
642 views
Usually answered in minutes!
×