Question about Cars & Trucks

Open Question

To change Timing belt on Citroen dispatch - Cars & Trucks

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

alicantecoli
  • 22156 Answers

SOURCE: glow plugs

awkard job but easy to do and remember the old adage if its in the way remove it ,remove the long communial wire then take the heaters out which is either a 12mm or 13 mm deep socket depends on make of glow plugs as to the size

Posted on Nov 23, 2008

Danniboi
  • 1098 Answers

SOURCE: citroen dispatch 1.9 diesel hard to start

You need new heater plugs by the sound of it.
could be possible fuel pump starting to fail but unlikely if its just when cold.

Posted on Jan 13, 2010

citroenchris
  • 600 Answers

SOURCE: citroen dispatch van 1.9 2001 starts runs for

I assume it is deisel? if so you probably have an air leak in the **** side of the fuel pump, perhaps the primer pump, what sort is it?

Posted on Aug 24, 2010

  • 266 Answers

SOURCE: should the tensioner plate move

hey mmmMke. sounds like your tensionor is not working correct.with engine off grab the belt and pull if you can pull belt easy then tensionor is not keeping belt tight enough for good operation

Posted on Feb 12, 2011

Testimonial: "cheers"

  • 43 Answers

SOURCE: Does anyone know where is

engine temp sensor is part of your exhaust.

there should be one in the engine compartment screwed in to the exhaust manifold and there there should be at least one more under your care on the exhaust pipe near the catalytic converter. some vehicles also have one near the back of the car past the converter to record exhaust readings but this is usually for trucks and larger vehicles like SUV's and vans. if you are having an issue with your sensor connect a code reader to your car and pull up the error code to find out which sensor is faulty. you should be able to look online for details on which code reference to which sensor, and then just buy a new sensor and replace. advise not trying to clean the sensor as the cost versus possible damage you can cause is worth just getting a new sensor.

tp remove it usualy takes a flat head screw driver to pop off the electrical connector and a wrench to unscrew the sensor from the exhaust. simple procedure with a ending of self satisfaction on not paying 200 $ to have someone to spend 15 minutes to turn a wrench on your car.

Posted on Jul 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine management is on in my citroen dispatch any idea what problem would be


not really!! take it to autozone and have codes read they do it free .

Aug 06, 2016 | Citroen Cars & Trucks

1 Answer

Does a citroen dispatch 1.9 have a non interference engine


It has an interference engine. A broken or slipped timing belt will send the pistons into the valves causing severe engine damage.

So the answer is no.

Apr 23, 2016 | Citroen Cars & Trucks

1 Answer

2000 citroen dispatch van 2.0HDI turbo


Are you sure the alternator is not seizing up?

Mar 06, 2014 | Cars & Trucks

1 Answer

Fuse box layout citroen dispatch


I have a dispatch 52 plate with no working reverse lights, I THINK I need a new reverse light switch which is ment to be with the bulk of the engine but I cant for the life of me find it, any help would be great

Mar 20, 2012 | Citroen Berlingo Cars & Trucks

1 Answer

Should the tensioner plate move while the engine is running. Engine bay has been recently cleaned, believe dirt to to be on belt, hence noise, but since looking have noticed the tensioner plate seems to be...


hey mmmMke. sounds like your tensionor is not working correct.with engine off grab the belt and pull if you can pull belt easy then tensionor is not keeping belt tight enough for good operation

Feb 12, 2011 | Yugo Hatchback Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...