Question about 2003 Ford Focus

1 Answer

Tail lamps are out. fuses and bulbs are okay. What the problem?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 2 Answers

There are 3 different fuses that can affect your STOP/TAIL lamps in the Central Junction Box (Bottom of dash drivers side)
They are fuse position F2.42 / 15amp

F2.57 / 7.5amp
F2.58 / 7.5amp
I hope this helps


Posted on May 06, 2013

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side tail lights and front corner light won't come on, doesn't seem to be a fuse...any help??


There would be a fuse for tails and corner lamps, but if the other side is okay, then the fuse is good. Check your bulbs, try new ones, sometimes you can't tell by looking when a bulb is bad. If new bulbs don't work either, it may be a ground for the side not working, or the bulb sockets may have a problem.

Dec 09, 2014 | Cars & Trucks

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

1 Answer

Tail lights on '01 lexus 430 wont come on


Check fuses first for rear park lamps. I do believe there will be 2 fuses for RR & LR tail lamps. Owners manual will state the location of the fuse junction box. If both fuses are good, I would next check to see if the park/brake lamp bulbs are good and are the correct type. If the bulbs are correct and okay, the turn signal stalk assembly has failed and needs to be replaced. BEFORE YOU REPLACE THAT PART............. If you have a trailer hitch installed, check the trailer hitch wire harness and make sure that it is not shorting out on anything metal due to poor installation. If that is the case, repair short and replace rear park lamp fuse(s). Hope this helps you out.

Sep 21, 2013 | 2001 Lexus LS 430

1 Answer

Hi, my license plate lights out along with the tail lights. I check the fuse and it's okay. The bulbs have all been replaced also.


did you check all fuse boxes? use a test lamp to test all fuses. should be 2 or sometimes 3 fuse boxes. look under dash on both sides.(may need to remove panel) or on the end of dash panel.also underhood.
if tail fuse is good and has voltage on both sides of fuse when switch is in park or head position,look for an "open" in tail lamp circuit. if no voltage at fuse check headlamp switch for taillamp output.

Oct 13, 2011 | 2004 Buick Century

2 Answers

Having trouble fixing brake lights


Tail/Turn Signal Lamp Removal & Installation Cab/Chassis gm-06-00-1071.gif

To Remove:
  1. Disconnect lamp assembly electrical connector.
  2. Remove nuts and lamp assembly from bracket.
  3. Remove lens screws.
  4. Remove lens, gasket and bulb.
To Install:
  1. Install lamp assembly and nuts to bracket.
  2. Connect electrical connector.
  3. Install bulb, gasket and lens.
  4. Install lens screws.
Except Cab/Chassis gm-06-00-1075.gif

To Remove:
  1. Lower endgate.
  2. Remove 2 tail/turn signal lamp assembly retaining screws.
  3. Rotate tail/turn signal lamp assembly and remove from vehicle.
  4. Disconnect lamp assembly electrical connector.
  5. Remove bulbs by pulling straight out of bases.
To Install:
  1. Install bulbs by pushing straight into bases.
  2. Connect electrical connector.
  3. Install tail/turn signal lamp assembly to vehicle and secure with 2 screws.
prev.gif next.gif

Oct 13, 2010 | 1997 GMC Sierra

1 Answer

I have a 2004 Chevy TrailBlazer that just developed a problem with the left turn signal. The left turn signal indicator on the dash is blinking rapidly and the tail light turn signal is out. I change out...


The Trailblazers have a common problem with the printed circuit boards in the tail lamp housing.
Unplug the tail lamp housing at the wiring connector and test for power with a test light. ( With turn signals on) You may have an open circuit in the lamp housing circuit board. Good luck

Apr 02, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

Left rear tail light went out and its not the bulb can't find the fuse


If Same Light For RH Lamp Is Working Then It Could Be Problem with Bulb of Lh Tail Lamp Or Wire Got Disconnected, Check Main Socket For LH Tail Lamp, Some lose Connection Or Corrosion May Be There, Fuse Is Ok.

Jan 26, 2010 | 2003 Mitsubishi Outlander

1 Answer

Tail lamp fuse blows


the wire is obviously pinched. Try removing both tail lamps and check that the wiring did not fold and pinch when lamp installed.If recent bulb change, the wrong bulb could do it. And check the filament of the bulb for breakage and falling against post. Second most likely area of pinch is at sill plate @ door opening.

Jul 24, 2009 | 2007 Suzuki XL-7

1 Answer

Non-working tail lights


Tail light bulbs used are double element one is tail one is turn check your bulbs and, make sure the lamps for your turnsignal have two pins and, are a different number than your other lamps

Apr 11, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
2003 Ford Focus Logo

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5467 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...