Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the red plug on the bell housing is wear you put it in .but to check it is a pain in the ****.on the passenger side of the of the transmission.by the cv shaft is a 1/4" plug or it takes a 7/16 socket.whith the car running and not jacked up pull the plug.if fluid runs out it is full. if no fluid leaks out it is low.the car must be level when you check it . if it is low have a friend to poor it in while you watch it .when it starts coming out put the plug back in.do not shut it off with the plug out or it will leak the fluid out,what will they think of next
Posted on Jul 20, 2008
The 2007 HRR uses and electric power sterring and steering control. There is a fuse in the number 19. The floor console fuse block is located on the passenger’s side of the floor console behind the
forward panel. The panel has four clips, one in each corner. Pull the panel to disconnect the four
clips, and access the fuses. Use the fuse puller to remove fuses. I do have the owners manual if you need it.
Posted on Mar 29, 2009
The motor on the power steering is overheating which causes the thermal overloads to trip.
go tho the junk yard and buy a motor for a 2004 thru 206 ion or a 2004 thru 2008 chevy colbalt.
they are all the same. You may have to buy the wholle steering colum but you can remove the motor with 2 - 12mm bolts and a quick dissconnect pulg. Replace just the motor as the whole steering colum is a bit more complicated. the dealerships want you to replace the whoe steering colum, in fact that is the only way they sell the parts. It is a scam. Just the motor needs to be replaced.
I have done it on 4 different ions. try to get a motor with few as possible miles and as new as possible. I have paid between $50 and $125 for these. The dealer wants $900 fnad about $500 to install. It is very simple to do. Only 2 bolts.
Posted on May 20, 2009
I would use the factory Power steering fluid. However as long as the fluid is Hydrolic oil G 002 000 you will be fine. Just take this referance number in and have your local parts store see if they can come up with comprable fluid to the VW power steering fluid
Posted on May 29, 2009
2006 f350 crew 4x4. Replaced p/s pump,booster,put gauges to check pressure? Fluid clean, lifted in air to check steering linkage and turning without load. Still baffled ! I work at a Ford dealer and mechanics said its normal. Thats BS! I replaced the p/s pump so im guessing the screen was new with the pump. I will check for the hell of it. I have a feeling it is suspension under load. The symptom on this truck is not turning when brake applied. Also hard turning when vehicle is on and in park,wont turn.
Posted on Apr 10, 2010
Tips for a great answer:
May 04, 2014 | 1998 Plymouth Grand Voyager
Mar 30, 2011 | 1997 Ford Taurus
Oct 21, 2010 | 2004 Honda Accord
Jun 20, 2010 | 2004 Chevrolet Avalanche
May 16, 2010 | 1996 GMC Yukon
Feb 08, 2010 | 1987 Mercedes-Benz 300-Class
Sep 27, 2009 | 2003 Kia Rio
Feb 18, 2009 | 2003 BMW 325
18 people viewed this question
Usually answered in minutes!