Question about 1999 GMC Yukon

Open Question

Key fob works pwr door locks just fine, but all interior pwr dr lock buttons don't work.

Interior pwr dr lock buttons only pwr lock all doors, but will not pwr unlock any doors. What part is broken?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1056 Answers

SOURCE: right door pwr lock pwr

Check the cabling that goes from the firewall to the right door (open the door, and you will see it at the front of the door.)

Look for any damage to the cable its self, then check the connectors.

From tehre I would start checking power to the connectors.

Posted on Aug 05, 2008

Ad
johnjohn2
  • 5763 Answers

SOURCE: how come on a 2002 GMC Denali if you lock your key inside

i would say the theft module saw the door trying to be open without the door lock or fob first, once the door lock button was pushed it shut down, it new doors were trying to be unlocked in a theft manner, once shut down it needs time to reset or needs to see ignition cycle with key and read chip in key, smart system isnt it, good luck.

Posted on Oct 21, 2009

Testimonial: "I thought it was something like that, so I guess using the car door wedge set this into motion and the guy with the keys inside the vehicle is screwed"

  • 8 Answers

SOURCE: 1995 GMC Suburban. The interior power door lock switches not work

Take The Driverside Control panel Off The Door,And Check Conection On The Main Switches,These Vehicles Have Locks On Them, And If They get loose The Stop Working,Also Check The Little Switch Towards The Front of Panel,It Also May Be Loose,Use Caution,The Clips Are Fragile..

Posted on Nov 06, 2009

gladys_neal
  • 334 Answers

SOURCE: 1999 GMC Suburban -- Interior lights & door lock issue

this problem i have repaired many times.. it is normally a broken wire in the flexible rubber tube between the door and the doorjamb from years of flexing back and forth when you open and close the door.. i hope that helps

Posted on Dec 10, 2009

  • 1 Answer

SOURCE: Yukon xl rear door won't unlock and there is no manual lock.

I have the exact problem described. I can't find any brass contacts on the door frame of any door. What door are you referring to? The liftgate is closed and locked, so I can't get to that door frame.

Posted on Apr 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior light stays on when driving.goes off when I use key fob to lock


Interior lights will not turn off when door closed - VW Audi Forum

www.vwaudiforum.co.uk/.../36009-Interior-lights-will-not-turn-off-whe...
... locking when using key fob, only from the inside via the lock on the drivers door ...by key fob and manually turn off the interior lights but the door lights stay on.

close door light & interior lights - CarGurus

www.cargurus.com > Questions > Ford > Edge

CarGurusJul 24, 2010 - close door light & interior lights - close door light on my ford edge is lit up on the dash and the interior lights wont go off. all the doors, truck, and . ... are completly shut. what to do? help before my battery goes dead. ... charged Interior lights work Headlights are strong Key fob locks and ... Used Ford Escape".

Door Chimes, interior lights on when stopped, and power locks have ...

www.grandamgt.com > ... > Technical Q&A

Apr 28, 2011 - 13 posts - ‎5 authors
It really only happens when its totally stopped while in drive. ... Key Fob- It works, but no longer gives the horn sound to confirm its locked. ... The fact that the car doesn't honk when using the remote isn't a problem. ..... Currently my dome light stays lit when on the door position and my alarm goes off as soon ...

Help - Interior lights staying on / door locks going crazy ...

www.mazda3forums.com/...interior.../329450-help-interior-lights-stayin...
Feb 11, 2009 - It seems that my interior lights stay on while im driving. ... If you get into the car start up the car, and then close the door the lights shut off. ... the when youuse the key fob to lock the car at night the interior lights stay on as well.

Jan 27, 2016 | Cars & Trucks

1 Answer

Normal key operation will not unlock drivers door or key fob


If the key and fob operate the other doors OK, then there is a fault in the driver's door lock. Does the lock operate OK with the interior lock button?

Mar 03, 2015 | 2004 Ford Focus

1 Answer

Why does my 2001 f250 keep locking and unlocking while truck is off


1. Bad ground or connection at one of the door lock activators and/or switch. 2. Bad relay. 3.A loose or bad connecting door button (the plastic button in the door jamb that tells the car that your door is closed, it usually also activates the interior light. 4. Your key fob might have a problem. I had a Taurus where the key fob had a very small loose piece of wire in it and it caused the connection inside to conduct, thus activating the door lock when the key-fob moved in my pocket. Take the batteries out of the key fob. Does the door still lock and unlock?

Dec 04, 2014 | Ford F-250 Cars & Trucks

1 Answer

2002 Sequoia automatic locks/auto lock buttons no longer work - all doors affected


You possibly need to reprogram the lock system to match your fobs.
If it unlocks by the interior switches then its the fob programming. This site is one example you can look for. http://www.chadspictures.com/automotive/How-To-Program-Toyota-Key-Fob/ If this is not the issue the computer that does the door locks could have died or you can look for the door lock fuse or a cut or pinched wire (due to other damage in an accident or from prior mods you did). Other possibilities include intermittent door solenoids if you can use the interior switch you can click it open and closed until you find the one that does not work every time. Change it out as it can leave your vehicle unlocked or it might interrupt the system. worst case it could be the chassis computer this site sells some http://www.automotix.net/usedautoparts/2008-toyota-sequoia-chassis_computer-product-i88489256n.html?gclid=CKfowo60gb8CFQQOaQodGqUArQ . If the shift lock system is screwed up it could be casing issues also but that's a long shot.

Mar 29, 2014 | 2005 Toyota Sequoia SR5

1 Answer

Expedition door lock


Replace the battery on the key fob! Also, it may need to be reprogrammed by the Dealer!
Dr. Gene n Landrum

May 19, 2013 | 1999 Ford Expedition

1 Answer

2007 Marquis. No interior lighting. Power door and truck locks do not work. Keyless entry dark. Originally the truck release would work intermittently from the door button or the key fob. A day later...


You pobably have a problem with the lamp control module , or the SCP serial data network . Vehicles that have more then one control module , like your vehicle ! The modules share info an send control messages on the data network . The door lock's are controlled by driver door module an is also on SCP network .
Communications Network Information Module

The first step in diagnosing these type problems would be to hook up a professional type scan tool . Check codes an see if the module's are all talking .
Your best bet , take it to a qualified repair shop .

Dorman Lighting Control Module Installation Crown Victoria Marauder Grand...

what is lighting control module and what does it look like on 2004 Mercury...

Mar 23, 2017 | 2008 Mercury Grand Marquis

1 Answer

Rover 75 Connoisseur SE Sat/nav 2004 (53). The central locking button on top of the driver's passenger door doesn't pop down when the interior central locking switch is pressed,while the other 3 door...


It may be set in the main menu to lock only by the fob. I know on GMC's there are about 7 different locking options. I'm not a specialist in Land Rovers but the cheapest way out is to check all your options on the dash/steering wheel buttons.

Sep 09, 2009 | 2004 Land Rover Discovery

4 Answers

Program a remote key for 03 A6


I have an A4 and did this to re-program my key:

1. used the key to start the car...then turned it off
2. put the key in the driver door (door closed)
3. pressed the lock button on the key fob once
4. turned the key to lock the door.

This is basically the steps in the owners manual, but the car must be started with the key first, and the key must be in the door lock before pressing the lock button.

Dec 10, 2008 | 2003 Audi A6

Not finding what you are looking for?
1999 GMC Yukon Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...