Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Found It!!! It is located on driver's side kick panel or left foot rest, near firewall. Note: you must remove the plastic panel (4 screws) that is on the side.
Posted on Jun 25, 2009
The fuse is actually a Relay Switch and its located in the Fuse Relay Center on the driverside of the engine compartment. The Black Box is labled Fuse Relay Center, the diagram on the cap displays which Relay is the Fuel Pump relay...the Relay switch is usually $8-$15 depending on where you shop
Posted on Jul 28, 2009
The relay and fuse is located under the hood in the relay box. It will be labeled on the lid. If fuse is good, then test the relay. Pull it out and with a test light see if there is power. If there is then remember that one. Have some one turn the key on and find another power wire. There should be 2 powers.If there is only one power then there maybe a problem in the ignition switch. If there is 2 powers then you need to get to the top of the fuel tank and see if power is getting to the pump. The power at the pump will be there for only a few seconds once the key is turned on and then will drop off. Let us know how it goes.
Posted on Aug 30, 2009
Did you check the fuel inertia switch in the passenger side kick panel ?
The fuel pump is powered :
the fuse to the fuel pump relay.
The fuel pump relay to the fuel inertia switch
The fuel inertia switch to the fuel pump itself.
At the fuel inertia switch in the kick panel, power from the relay is the Dark Green w/ Yellow stripe wire and the pink w/ black stripe wire is the power. from the fuel inertia switch to the fuel pump.
If you jumper the fuel pump relay, you should hear it run. If not pull the fuel pump relay, and check the pins in the relay socket, pin 30 should be the power from the fuse.
If you have power at pin #30, jumper the relay socket as shown with the red line above, and check the dark green w/ yellow stripe wire at the fuel inertia switch for power.
Press the button on the top of the fuel inertia switch, and check for power leaving the fuel inertia switch on the pink w/ black stripe wire.
This is tests good, check for power at the fuel pump, same pink w/ black stripe wire.
Fuel inertia switch info is in the owners manual, If you did not get an owners manual with your truck ( purchased used ), you can download one from Ford :
Posted on Jan 03, 2010
Yes, it is usually 25 amp (Yellow). There is also, a relay for the pump. Most of the fuses are under the dash...you can check your owners manual to see exactly where the fuse panel is located. The relays are under the hood. If the relay is working properly, you will feel a clicking motion while letting someone else turn the ignition on, but don't attempt to turn it to start the engine since this will cover the noise that you are listening for. If you need to know which relay is for the fuel pump, you can ask at the Auto store. They should be able to help. If the relay isn't clicking, you can tap it lightly with a screwdriver handle to get it to work; however, if the pump isn't running and is original; it is most likely bad and some test needs to be done to confirm that before taking the pump out.
Posted on Jan 25, 2010
Tips for a great answer:
Feb 24, 2017 | 1997 Chevrolet Camaro
Jan 30, 2013 | 1996 Chevrolet Camaro
Jan 26, 2011 | 1997 Chevrolet Camaro
Jan 02, 2011 | 1997 Chevrolet Camaro
Jan 02, 2011 | 1997 Chevrolet Camaro
Dec 20, 2009 | 1991 Chevrolet Camaro
Oct 11, 2009 | 1996 Chevrolet Camaro
81 people viewed this question
Usually answered in minutes!