Question about Cars & Trucks
Don't know how to take the faceplate off. Please help
What mirror working on out side or inside.if you talking about out side mirror need to remove upper corner interior trim panel by pulling it straight off until clips release it from the door.
Posted on May 04, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
as long as nothing is stuck in track and you hear no noise when using switches, look for broken wire at connector or in harness. ck fuse first of course, if blown, something may be stuck in track causing it to stop and blowing fuse
Posted on Nov 16, 2008
I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.
Posted on Nov 24, 2008
They Are easy to replace, They mount to the floor with one large bolt. The nut below is welded so if you can obtain a large enough socket ... You may als get one from a junk yard.
Posted on Dec 31, 2008
Sorry there is no fuel pump reset on the Tahoe. If you have no fuel pressure, check the fuses and relay,and wire harness to the fuel pump from the inside frame rail on the drivers side. If you can hear the fuel pump working, check the fuel pressure at the shredder valve and there should be 60 to 66 PSI, if you don't you can try checking for 12 volt at the fuel pump wire harness at the frame rail. Good luck and keep me posted, be glad to help.
Posted on Jun 06, 2009
Tips for a great answer:
Jun 25, 2014 | 2001 Dodge Durango
Oct 21, 2011 | 2001 Chevrolet Tahoe
Sep 26, 2011 | 2003 Chevrolet Tahoe
Mar 12, 2011 | 2007 Chevrolet Tahoe
Jan 27, 2011 | 2001 Chevrolet Tahoe
Dec 30, 2009 | 2003 Chevrolet Tahoe
Oct 09, 2009 | 2002 Chevrolet Tahoe
Dec 31, 2008 | 2001 Chevrolet Suburban
92 people viewed this question
Usually answered in minutes!