Question about Cars & Trucks

Open Question

Hyundai How Tohow do i remove key from ognition of i40

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want to fit air bags to my 2014 i40 Hyundai station wagon in the rear coil springs. Could you please tell me the internal dimensions and the height of the coil springs loaded and unloaded.

this a job for the suspension professionals
there are coil springs with the air bags already inside the coils that will fit straight in
the thing with air bags is that if inflated to the correct pressure , the height of the springs will not vary as the load is taken by the air bag and not the coil spring
for example heavy vehicles running on air bag suspension retains the same ride height regardless of the load on the vehicle
what you propose is great for towing trailers, caravans etc or carrying heavy loads on the tray at the back

Jul 08, 2017 | Hyundai Cars & Trucks

1 Answer

Looking for reverse light switch location on 2012 hyundai i40 tourer

If it is a manual transmission it is screwed into the side of the transmission, if it is an automatic it is integrated into the range selector switch.

Jun 22, 2017 | Hyundai Cars & Trucks

1 Answer

How to start a hyundai i45 that doesn't recognise a key

contact hyundai dealer as will be needing a special sequential code entering at the very least

May 04, 2014 | 2011 Hyundai i40

2 Answers

I sprayed liquid wrench into my ognition now my key wont turn help me

Try to jiggle the stearing wheel from side to side until it moves freely... my key once locked it's position, and that helped it.

Apr 05, 2013 | Cars & Trucks

1 Answer

Need tohow to remove 1987 caddalic oil pump ?

I suggest check engine VIN and look rght overhaul procedure in THIS LINK.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Aug 16, 2012 | 1987 Cadillac Brougham

2 Answers

Where is a Hyundai Elantra starter located?

check on the under, backside of the transmission...

Feb 07, 2010 | 2006 Hyundai Elantra

1 Answer

Hyundai Sonata 06 engine runs key out ignition in off position

car should be under warranty .. try having a new key made .if that dosent fix it. it's in the key lock maybe a wire loose .

Jan 21, 2009 | 2006 Hyundai Sonata

1 Answer

Key won't turn on ognition

If the key is stuck in your ignition, try turning your steering wheel hard in both directions while twisting your key gently in both directions. The steering wheel lock may be putting back pressure on your ignition switch causing it to bind and this in-turn stops you from being able to turn your key.

If you can slide your key in and out of your ignition, then your key may be worn and the cylinder cannot be twisted by the humps on the key...check to see if your key shows signs of shinny sides and deep marks. If this is the case you will have to have keys made for your car. It may be easy to do if you have T-Tops, you can take a top off and bring it to a lock smith. They can make a key to fit your ignition in about an hour and it should cost about $25-$35. I had to have that doen for my 1991 MR2. Hope this helps!

Oct 28, 2008 | 1986 Toyota MR2

1 Answer

Hyundai accent 1996 steering lock removal

try tunring the key and the whell at the same time it should release the lock.

Aug 05, 2008 | 1996 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides