Murano windshield washer - Cars & Trucks

try this It will help.
https://www.justanswer.com/nissan/4j0r8-nissan-datsun-murano-replace-windsheild-washer.html

here it is...http://www.justanswer.com/nissan/78w0k-murano-no-water-coming-front-back-window.html?r=aw'85386'0&awc=7742_1546051590_5c43beb6d8fd60949db04bf90ba10401

check for a bad connection at the wiper motor.

do you have a hitch? installed by someone else other than nissan dealer such as u-haul or others??lets start there

you need to remove the upper half of the intake plenum to acces the plugs.not as bad as it looks.only tricky part is the support bracket bolts(12mm) on rear of plenum.if you remove the lower windshield cowling and metal cowl panel at base of windshield it makes it much easier.may seem intimidating but its actually very straight forward and only takes about an hour start to finish.any further questions let me know.good luck!

Look at other similar vehicles in your travels

check wiring to pump with test light see if hot first, If not find fuse in owners Manuel, if its hot need a pump, they do go bad

there is a clip that holds the arms in place and it slipt off track dealer sugests that u buy the part, the complet asembly costs about 140 dollars. u can take the cowl apart and slip it back on but i will slip off again and, and all because a stuped plastic cllip that they dont sell separete. hope this help...

The fluid for both windows comes from the front resivoir. The pump there is suited to pump either to the front or to the rear based upon your operation of the switch & if the rear isn't working, the line will need to be removed near the pump & checked for obstructions.

These can be cleaned with a vacuum tester, the kind that lets you pump the unit & draw a vacuum, connected to the hose, it will draw any debris back out of the tube. You probably don't want to try & force fluid through the hose as it won't fit through the washer nozzle.

good luck

This bulb can be replaced without removing the washer fluid reservoir. There are 3 screws that go through the bottom edge of the bumper cover into the right inner fender guard. Remove these screws and pull the inner fender down to gain access to the back side of the fog lamp and remove the bulb.


Nissan Scope Technician- 10+ years experience in Nissan dealership.