Question about 2006 Chevrolet Uplander LS
Rattling Noise When Driving Over Bumps But Not When Turning
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You just might not hear the noise when it is at speed or the engine vibrations are not at the right frequency to cause the resonance.
I'd check the heat shield around the catalytic convertor; they are notorious for doing this and we have one rattling currently too!
Posted on Jul 21, 2008
SOURCE: front end rattle
It's a loose steering column. Remove the black plastic shield under the steering wheel. Lossen the bolt that holds the two shafts together, slide them together as far as they'll go, and re-tighten the bolt. It's that simple... to stop that annoying rattle.
Posted on May 15, 2009
SOURCE: rattling noise
Try the cupholder on the drivers side. Then, if it's like the issue I had, push the plastic around the dimmerswitch wheel in toward the rest of the dashboard. THAT'S where the rattle was for my car. Also a 40mph and above issue. If that doesn't do it, try putting pressure on different parts of the dash to eliminate the fitting together of the molded plastic as the issue. Other then that, I'd have to be there to see what it could be!
Posted on May 20, 2009
You can see the brake disc on the front wheels, Check both sides of each side, looking for scoring. Brake pads have wear insicators on them that are metal tabs that contact the rotor (disc) when pads get thin. It would be better to pull the wheels off to get a good look at the pads. Good luck
Posted on Jun 03, 2009
Tips for a great answer:
Apr 25, 2014 | Pontiac Grand Am Cars & Trucks
Apr 23, 2013 | 2003 GMC Yukon XL
Nov 07, 2012 | Cars & Trucks
Jan 27, 2011 | 2008 GMC Yukon Xl 4WD
Oct 29, 2010 | 2001 Ford Escape
Jul 24, 2010 | 2008 Chrysler 300
Nov 11, 2008 | 2004 Nissan XTerra
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: