Question about Chevrolet Uplander

Open Question

I would like to replace my rear window washer nozzel on my 2005 uplander

Replace the rear washer nozzle on uplander

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: replace window washer nozzels

Open the hood disconnect the hoses from nozzles and gently push the clips that hold the nozzles on off of the nozzles, push the nozzles through the hood. reverse the process for installation

Posted on Aug 11, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why nozzele doesnt work

Rozana Sirine... hello,

Wind-shield washer nozzle can get clogged by putting window wash rather than windshield was in the reservoir...

Remove the washer bottle from your vehicle...
empty ...
Simply put a high pressure hose stream into the
bottle and wash it COMPLETELY CLEAN....

Put a small amount of water into the tank and
directly TEST connect the battery to the motor to
see if the pump MOTOR still works.

GENERIC Replacement parts are available at
auto-parts houses... (I am a OEM Stock-nut & must have ORIGINAL EQUIPMENT but that's just me))...

If all that works... use an ordinary sewing pin to assure the spray nozzles are open (or replace them with new ones...

Finally... My 535i BMW needed a new external SPRING at the edge of the hood to keep the washer hose from kinking ...
(radius the turn... gently)...

If all that fails to resolve your nozzle issue comment me back... we can try to better identify your "vehicle" to get into the electrical... More Information for TRICO 47100

Sep 26, 2016 | Cars & Trucks

2 Answers

How doi replace a rear washer nozzel

Not much information to work with namely the make and model of the vehicle and why you think you need a new nozzle. If it is not squirting there are several possibilities. First I would listen for the pump. It can be under the hood or in the rear side panel depending on your model. Consult the car manual. If the pump is working and the resevoir has fluid in it the next things it could be a pluged nozzle or a disconnected hose. A straight pin or hat pin should be small enough to insert into the nozzle to check for a plug. If the pin is too big then a wire from a stiff wire brush may work to dislodge a plug. If you are able to move something in the nozzle try to use the washer to see if it squirts. If it does squirt it will likely plug back up again if you don"t clean the slug out of the nozzle. To do this you may need to remove the inside door panel to get to the hose connection and back flush the nozzle. At this point you can remove the hose from the nozzle and check the flow by operating washer. If you get flow through the hose you will need to clean the nozzle. If there is no flow you will need to check it at the pump or trace the path of the hose to find a break in the hose.

Feb 04, 2015 | Cars & Trucks

1 Answer

Rear window washer problems

Yes --use a pin and insert it in the nozzle and push the nozzle to the desired position.

Mar 23, 2014 | 2008 Chrysler Aspen

1 Answer

How to replace spray nozzles

you must go in from under the hood and carefully remove the padding and remove the hose from the washer nuzzle and than push in the tabs, remove and than replace......

Mar 16, 2014 | 2006 Hyundai Sonata

2 Answers

Need to remove factory overhead rear DVD player in a 2005 chevy uplander

how do I remove my dvd player in my 2006 chevy uplander? I need to replace it and dont want to spend that kind of money to have it pulled out. I dont see any screws or bolts

Nov 20, 2010 | 2006 Chevrolet Uplander

2 Answers

2004 Ford Explorer rear window washer does not squirk fluid. Pumps leaves fluid on ground behind left rear tire

I'd have to say that the small rubber hose that takes the fluid to the washer nozzel is broken or split somewhere along its length.

Apr 30, 2010 | 2004 Ford Explorer

1 Answer

Front windshield washer doesn't work but rear washer does in 2003 chevy venture and the fuses seem to be ok

either the hose to the spray nozzle of the nozzel itself is plugged up
unhook the hose to the nozzle and blow thru it with compressed air

Sep 26, 2009 | 2003 Chevrolet Venture Passanger

1 Answer

Replace window washer nozzels

Open the hood disconnect the hoses from nozzles and gently push the clips that hold the nozzles on off of the nozzles, push the nozzles through the hood. reverse the process for installation

Aug 11, 2009 | 2002 Chrysler Concorde

1 Answer

Rear wiper does not work.

Exactly. Not much else can go wrong. Located motor/pull and replace. Should be easy and inexpensive. No need to go to the dealer. Napa parts will be fine for this. Only other option I can think of is the switch...

May 03, 2009 | 2005 Chevrolet Uplander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides