Question about 2002 BMW Z3

1 Answer

Reset oil indicator light 2002 Z3 Automatic

How do i reset the oil indicator after oil change?

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers
Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
GIBBO68
  • 17 Answers

SOURCE: Want to reset the service indicator after changing the oil and filter

HI NO NEED FOR HI TECH GIZMOS HERE ARE YOU SITTING COMFORTABLE....IGNITION IN OFF POSITION, PRESS AND HOLD MILEAGE RESET BUTTON ,TURNING THE KEY ONE CLICK STILL HOLDING IN THE BUTTON.HOLD FOR ABOUT 5 SECONDS TILL YOU SEE OIL SERVICE OR INSPECTION WITH RESET OR RE IN THE DISPLAY,PRESS THE BUTTON AGAIN ROUGHLY 5 SECONDS UNTIL RESET OR RE FLASHES,WHILE THE DISPLAY IS FLASHING PRESS BUTTON AGAIN VERY BRIEFLY TO RESET THE SERVICE INTERVAL.AFTER THE DISPLAY HAS SHOWN THE NEW INTERVAL YOU SHOULD SEE (END SIA)FOR ABOUT 2 SECONDS AND THERE YOU GO JOB DONE IT WORKS ON MINE EVERY TIME I HOPE THIS HELPS,,,,,,,,,, WELL OFF YOU GO YOUVE GOT MONEY TO SAVE ;-)

Posted on Jun 18, 2008

  • 51 Answers

SOURCE: I would like to know how to reset the oil change indicator on a 1994 BMW 318i

Switch on ignition.

Earth terminal 7 (I've no pic sorry) and hold for 3 seconds.
Switch ignition off
That should do it

Posted on Apr 29, 2009

  • 77 Answers

SOURCE: Reset oil change indicator on BMW 525 2006

BMW requires a scan tool to reset the light.

Posted on May 17, 2009

AnIdea
  • 33 Answers

SOURCE: Oli indicator mileage reset

This is showing that your overdue for a sevice by 8,769. Depending on which service it will either say oil or inspection. With bmw's the order is of service is oil service .. inspection 1 ... oil service .... inspection 2. etc etc.

To reset the light the only tool you need is your finger. On some e46's there are 2 instrument cluster buttons (little rubber poles sticking out). If you press the left one with the ignition off you'll notice your mileage come up on the dash. This is the button you need to reset the service indicator.

With everything off,press and hold the same button and at the same time turn on the ignition to position 2 and wait a few seconds. It will then show the service and overdue mileage.Let go of the button and press and hold again until the 'reset' light flashes. Let go again and then hit the button once. Viola! The same can be done for resetting brake fluid light (clock symbol next to mileage) Instead of pressing and holding for the second time just press the button once to follow into a different menu for and the clock symbol will appear to be reset.

End of essay!

Posted on May 27, 2009

jagjeffery
  • 318 Answers

SOURCE: BMW528i 1999-How do you reset oil service light after oil change?

With the key in the ignition but in the off postion press and hold your odometer trip button in then turn your key to the first postion hold the trip button in for 5 seconds the display will read oil service or inspection then it will say reset release the button and then press it again untill the reset starts to flash then release and press the button briefly to reset

Posted on May 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

RED LIGHT INDICATING OIL SERVICE


Hi. The oil service light in red indicates that the vehicle is over due for a vehicle service..OIL SERVICE.. If you don't have it done, it could all go wrong. Have the light reset after Service and then it will monitor for your next service.bye for now.

Feb 19, 2014 | 2002 BMW 3 Series

2 Answers

How to reset the lite on dash board " change engine oil" on a automatic 2002 chevy avalanche Z66?


Different car has different way to reset. Read its manual, it should tell how to reset.

mai

Feb 25, 2013 | Cars & Trucks

1 Answer

Where is the reset button to rest your change oil light?


{: ) There is a trip reset button on your cluster to reset the oil life.
Follow this procedure to reset the GM Oil Life System
  1. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the driver information center (DIC).
  2. Once OIL is displayed, push and hold the trip/reset button for 5 seconds. The number will disappear and be replace by 100 indicating 100 percent oil life remaining.
  3. Turn the key to OFF.
  4. If the change engine oil message comes back on, the engine oil life monitor has not reset. Repeat the procedure.

wyet_helps_5.jpg

Jul 15, 2011 | 2002 Oldsmobile Silhouette

2 Answers

How to reset oil change waring after changing the oil


engine off, key to on and press throttle to the floor three times, light will flash and be reset.

Sep 06, 2010 | 2002 Oldsmobile Silhouette

2 Answers

How do i reset the oil light?


Pontiac Grand Am, 1999-03
To reset the Change Oil light, open the driver’s side instrument fuse panel cover and turn ignition on engine OFF. Press the RESET button and release. The change oil indicator light will flash. Press the button again and the system will be reset.

Good luck and happy new years.

Jan 03, 2010 | 2002 Pontiac Grand Am

1 Answer

Does oil light need reset after changeing oil


Check with owners manual to see if this code indicates a change oil or low oil pressure. To be sure, check engine oil level before starting vehicle. If this is a change oil indicator, the owners manual will give the steps required to clear.

Dec 02, 2009 | 2002 Jeep Liberty

3 Answers

How 2 turn off "oil change required" lite


Ford Explorer, Mercury Mountaineer, 2002-06

To reset CHANGE OIL SOON/OIL CHANGE REQUIRED message on the Message Center, press the SET UP control to access the System Check mode. Press and release the RESET button to display “OIL LIFE % HOLD RESET NEW” is displayed. Press and hold the RESET button for 2 seconds until “IF NEW OIL HOLD RESET” is displayed. Press and hold RESET button until “OIL LIFE SET TO 100%” is displayed.

Ford Five Hundred, Freestyle, Mercury Montego 2005-06 Tap the ODO/TRIP button to toggle the display between the odometer and trip odometer. Tap on the ODOiTRIP button again to toggle the display between the trip odometer and OIL LIFE % display. Press and hold the ODO/IRIP button for 2 seconds or more to display OIL LIFE 100%. Your oil life in now reset.

Good luck and print this and keep it in the glove box. Keep me posted if you have any other questions

Nov 04, 2009 | 2002 Ford Explorer

1 Answer

Service engine soon light on in 2004 buick rendevous after accident. no codes given. turns on when engine starts.ran scanner- no codes... had to reset everything after car repairs. told not related to...


oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>>
Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display.
Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.

May 08, 2009 | 2004 Buick Rendezvous

3 Answers

Need to know how to reset the change oil light on my 2002 aztec


If you have the Driver information Center then you just select engine life cycle and hold down set button, otherwise You turn the igniton on, pump the pedal 3 times within 5 seconds, the change oil light should start flashing indicating it has been reset.

Nov 17, 2008 | 2002 Pontiac Aztek

Not finding what you are looking for?
2002 BMW Z3 Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...