Question about Jeep Grand Cherokee

Open Question

P0698 code engine bay washed with power hose hard start RPM will rise to 2000rpm

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
pkthoege
  • 93 Answers

SOURCE: 94 honda civic idleing problem

This is a bad throttle position sensor

Posted on Dec 16, 2008

Ad
  • 86 Answers

SOURCE: won't start, engine wont rev above 2000rpm

Have the alternator tested. You are providing a low charge to the battery when you jump it and when taking it above 2K RPM requires more amperage resulting in the engine dying and the rough idle

Posted on Apr 23, 2009

alicantecoli
  • 22219 Answers

SOURCE: produce 24v 300amps of power from alternator w/out car engine

depends on the gearing ??and weither its tesla wound motor.ie very big and heavly wound motor of a skimpy lightweight modern day motor

Posted on Aug 07, 2009

  • 1 Answer

SOURCE: engine runs fast on start up (2000)rpm. when temp

This is normal sometimes when it is cold. However, you should let the engine to run for ~ 2 minutes before you drive away...it will dissappear.

Posted on Aug 30, 2009

tunde007
  • 2382 Answers

SOURCE: Low power at low RPM

Hi, the transmission is slipping Or your fuel filter is simply clogged up and starving the engine of fuel, clogged fuel injectors? dirty IACV? sounds like your car is starving from something...

You can alsotry to clean your throttle........

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats wrong when car start but no throttle


does the engine stay idling with no response to throttle movement? or does the engine cut-out when the throttle is pushed?

Nov 26, 2015 | 1997 Chevrolet Cavalier

1 Answer

Toyota corolla hatch 2002 idle at 2000 rpm when


All the above is normal , except 2000rpm is a little high at idle . can be adjusted down to 1500rpm. the computer adjusts the engine speed . in drive the transmission loads up the engine idle drops to 1000rpm . in park engine unloaded rpm increase all normal.

Sep 17, 2014 | Cars & Trucks

1 Answer

Engine noise at 2000RPM


sounds like a transmission, try to shift it to neutral after you reach 2000 rpm + and see if the whining will stop

Jul 22, 2014 | 2007 Hyundai Getz 1.6

1 Answer

LOSS OF POWER WHEN SHIFTING GEARS IDLE AUTOMATICALLY STARTS RISING REALLY HIGH BUT VERY LITTLE POWER


Every time the RPM rise but no power start with vacuum leak. Start the engine and listen for vacuum leak. The car is equipt with air flow sensor and if air buypas the sensor the engine loses power

Apr 19, 2014 | 2003 Hyundai Santa Fe

1 Answer

Car will not move 2000 acura 3.2


ok you crank the engine over, it starts,
it can rev. to 3000 rpm for 1 second in park ?
y/n?
you then select, all gears forward and reverse and car can not move on flat ground, all brakes off?
can you push car in neutral on flat ground, , y/n ?

if no, brakes are bad. (or something more serious , ask)
if yes, tranny is dead (but....)

the if RPM rises, on engine (right foot action) and car MPH is 0
and rpm keeps rising that is a bad tranny (called slip or flare) in "D"
if you set the brakes hard,
and do the A/T stall test. (read the FSM)
and the RPM is way low that is a bad engine. (weak engine power)

if the RPM is good, stall tested. the engine and tranny are working. ( brakes stuck or frozen in ice?)
if the RPM flares, at stall test. it's a bad tranny
do the stall test for 5 sec max. rest for 15min and repeat.
STALL, test, makes tons of ATF heat. and heats the TC big time
RTM, it's all there. See FSM and read the manual.

Nov 23, 2013 | 2000 Acura TL

1 Answer

Problem with the Subaru Outback 2008 diesel Low power at low RPM before turbo starts working. Difficult to drive the car on mountain roads where you have to shift from third to second gear, often the...


the turbo is a variable vane type
that means that there are vanes in the exhaust housing that redirects the exhaust gas flow onto the turbine blades to get extra boost at low rpms
those vanes are controlled by an actuator and vacuum hose from a sensor
the hoses get brittle from the heat and fails , the vanes can rust up and seize or the actuator doesn't get the message from the sensor
run the fault codes first , then take it to an accredited turbo professional shop for a proper diagnosis

Jun 23, 2017 | Subaru Outback Cars & Trucks

1 Answer

Engine runs fast on start up (2000)rpm. when temp rises the engine hunts down and up from 2000rpm. no tick over


This is normal sometimes when it is cold. However, you should let the engine to run for ~ 2 minutes before you drive away...it will dissappear.

Jul 01, 2009 | 2000 Daewoo Nubira

1 Answer

2001 dodge ram 2500 diesel with 6spd manual trans. showing fault codes p1698 , p0237 & p0562. the truck will crank but not start. it has two new battery & map sensor.


p0562 is System voltage low
p0237 is Turbo/supercharger boost sensor A circuit low

cannot find a code p1698 but did find a p0698
p0698 is Accelerator pedal position sensor supply voltage to low

Apr 13, 2009 | 2001 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...