Question about Cars & Trucks

Open Question

Brake light will not work 1999ford expedication changed bulb

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dr_greg
  • 192 Answers

SOURCE: Both 2005 Honda Odyssey brake lights don't work.

make sure u have put the right bulbs in. rear brake lamps are dual filament....

Posted on Apr 15, 2009

SOURCE: brake lights went out, changed bulbs, checked fuse, still wont work

You have to check the brake light switch which should be around the brake pedal on the upperside.
Ones located rremove the wires tht go to the switch and jump them by using a piece of wire, thn check if the brake lights come 'on'. If they do , thn its the switch tht may need replacing or even sometimes adjusting inorder to operate.
Hope this helps.

Posted on May 10, 2009

emissionwiz
  • 75797 Answers

SOURCE: 1998 ford escort wagon brake lights out. bulbs and fuses changed.

have you tested the brake light switch? it is located at the top of the arm the brake pedal is attached to, it is very common for the wires to that switch to break inside the plastic insulation, the switch testing goes like this, there should be 12 volts present at both sides of the switch with the brake pedal depressed and one side without the pedal depressed.

Posted on Jul 01, 2009

  • 290 Answers

SOURCE: LEFT BRAKE LIGHT DOES WORK ,CHANGED BULB STILL NOT

on your Blazer GM finally did something smart. Carquest Auto carries a socket board for these. It white, about the shape of Florida. These go out regularly. Just undo old assem. replace. and make sure your put dielectric grease on bottom of bulbs. should last a long time.

Posted on Aug 28, 2009

george_karas
  • 207 Answers

SOURCE: brake light dont work, change bulbs, fuse, bake switch, and has power still dont work

check the erth mabe bet conection black wire from the ligth to the body of the car.

Posted on May 06, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999Ford crown vic is blowing a 15amp fuse that control the dash lights and tail lights . used to be an old under cover police car


Could be a short in one of the lamp sockets, or in the wiring.
The dash lights should be on a 5 amp fuse.

Feb 20, 2015 | Cars & Trucks

1 Answer

Head lights work brake lights don't, have changed brake switch and bulbs and checked fuses


When you say you checked the fuse, are you getting power in and out of it and the brake light switch ?

Jan 04, 2013 | 2003 Jeep Liberty

2 Answers

2007 chevy impala brake light and left turn signal not working


Fast flashing dash signals mean there is a bulb issue-DEFINATELY!

Aug 07, 2012 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Need to change brake light bulbs on Peugeot 107 is this easy


If both are not working that is a sign that you have some other problem and not burned out filament's in the bulbs bulbs. Try turning on the four way flashers and then off again a few times do the rear lights flash? if so the bulbs are ok. If the brake light still don't work check the bulb socket with a DC volt meter while the rake lights are help on by a helper, if you have voltage then likely the bulbs are the problem. If you still think the bulbs are the problem the way to change them is outlined in the owners manual with diagram's which I do not have.

Jun 26, 2012 | Cars & Trucks

1 Answer

1995 Honda Accord Brake lights not working. Center bulb was burned out. Changed the bulb, now the brake lamp light is on the dashboard and the brakes aren't lighting up


Did u change the bulb w/ the Honda's original BULB? They have a different type BULB in honda, the amperage and the base contact is different from a regular bulb. Hope that helps u out! taah!

Nov 16, 2010 | 1995 Honda Accord

1 Answer

No brake lights changed bulbs and fuses


Does the brake light in the rear window work? If so, the brake light switch is good. Running lights all work?

May 24, 2010 | 1998 Toyota Camry

2 Answers

Brake lights not working on 2003 E 350


Have you checked the fuse for the brake lights and have you checked the brake light switch.
The brake light switch is directly above your foot when it is placed on the brake pedal.

Sep 07, 2009 | 2002 Ford E350

2 Answers

LEFT BRAKE LIGHT DOES WORK ,CHANGED BULB STILL NOT


check for 12v in left brake light circuit......if no power then bad brake light switch...if power then try another bulb

Aug 28, 2009 | 1999 GMC Jimmy

1 Answer

Brake lights


do you have a 3rd brake light like on that is on the roof or in the rear window? if so does it work?
the brake lights are usually a 2way bulb so just because the lights work doesn't mean that brake lights will. if the 3rd brake light works replace the brake light bulbs if none of them work including your 3 brake light. check into having your brake switch changed. that is the switch under the brake pedal. when it is pressed the brake lights come on and when released they go off. if the bulbs do not fix the problem than try the switch.

Jul 19, 2008 | 1987 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...