Question about 1993 Oldsmobile Cutlass Ciera

1 Answer

Car 1993 where are the bolts to remove the starter?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 49 Answers

On the starter.....cant miss them they will be latched on to tge side of the engine. Especially in that car. It might be a little tough u might have to remove some pumps

Posted on May 03, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace 1993 Ford Crown Victoria starter


The starter will be under the car on the passenger side. You will need to raise and support the vehicle. There will be two bolts that hold the starter onto the transmission. Remove those two bolts and lower the starter. You can then remove the positive cable end and the smaller start terminal wire. Let me know if you have any questions and I'll do my best to answer them. Thank you for using FixYa.com!

Feb 26, 2012 | 1993 Ford Crown Victoria

1 Answer

I'm removing a starter on a 1993 Toyota 4 runner and I can't get to the top bolt. I have already loosened the lower bolt. How can I do this


Hi you need ta by a set of starter wrenches the have a bend so you can get to the top bolt if you have starter wrenches it will be no problem. Hans

Jan 18, 2011 | 1993 Toyota 4Runner

2 Answers

How to remove the starter from a 1993 isuzu trooper with a 3.2L engine,auto tans and 4wd.?


follow your positive cable from battery ,the starter is at the other end its held to motor by two bolts i believe is a14mm or 15 mm

Dec 09, 2010 | 1993 Isuzu Trooper

1 Answer

Replacing a starter on a 1993 volvo 940 turbo. Is this a difficult task?


It looks easy for the 940 but I am not sure about the 940 turbo, as maybe some of the turbo parts are in the way. I'm not sure about that, since there is no documentation on the turbo model vs. the 940 standard model. If you can follow the following instructions, then I would give it a whirl.

REMOVAL & INSTALLATION - 1993 Volvo 940
  1. Disconnect the negative battery cable at the battery.
  2. Disconnect the leads from the starter motor.
  3. Remove the starter motor retaining bolts.
  4. Remove the starter motor from the vehicle. To install:
  5. Position the starter motor to the flywheel housing.
  6. Apply locking compound to the bolt threads and install the retaining bolts finger-tight.
  7. Tighten the bolts to approximately 25 ft. lbs. (34 Nm).
  8. Connect the starter motor leads and the negative battery cable. Fig. 1: Unfasten the nut retaining the starter cables . . . 90952p12.jpg
    Fig. 2: . . . and remove the starter cables 90952p14.jpg
    Fig. 3: Unfasten the starter retaining bolts . . . 90952p11.jpg
    Fig. 4: . . . and remove the starter from the engine 90952p15.jpg
prev.gif next.gif

Oct 28, 2010 | 1993 Volvo 940

1 Answer

How do i change the starter in my 1993 camero


disconnect the red terminal from battery. jack up car enough to get under. secure with jack stands. near rear of engine under car, is the starter. unplug electrical harness from starter. remove bolts. as you remove the bolts, starter will come down. remove, put new one in. put bolts in, tighten bolts. plug electricfal harness in to new starter. lower car from jack stands. connect red terminal to battery. if you have an alarm, put key in ignition to on position before connecting battery.

Sep 18, 2010 | 1993 Chevrolet Camaro

1 Answer

How to remove a starter on 1993 chevy lumina?


Support the car very securely first of all

Remove the negative cable from the battery

Remove the wires from the starter

Remove the two bolts from the starter going upward to the engine block

Wiggle the starter out

Reverse this proceedure to reinstall

May 29, 2010 | 1993 Chevrolet Lumina

2 Answers

How to replace starter +1993 Mercury Grand Marquis


disconnect battery,,jack car up,,put jack stand on frame,,take starter bolts out,(may not be easy),,take wires off starter,,hoped it helped,,

May 08, 2010 | 1993 Mercury Grand Marquis

1 Answer

I need to replace my starter on my 1993 honda civic... Help?


  1. Disconnect the negative battery terminal and the starter motor cable at the positive terminal.
  2. Remove the engine wire harness from the harness clip on the starter motor
  3. Disconnect the cable from the B terminal on the solenoid, and the BLK/WHT wire from the S terminal.
  4. Remove the starter motor by loosening the two attaching bolts.
  5. To install, reverse the removal procedures: re-position the starter in place, replace bolts, tighten the starter-to-engine bolts to 32 ft. lbs. (45 Nm).
  6. Make sure that all wires are securely connected.

Mar 20, 2010 | 1993 Honda Civic 4 Door

1 Answer

How do i chang starter on my jaguar XJ6 1993 model


disconnect battery ground cable
remove bolt on transmission breather tube to starter mounting bracket
remove top bolt on starter bracket to bellhousing
raise vehicle
remove bottom bolt and leads from starter
lower the starter with braket

Mar 10, 2010 | 1993 Jaguar XJ6

1 Answer

How to change a starter motor


Disconnect battery, remove and mark wires and cable taken off starter, remove the 3 mounting bolts and remove starter. It looks like two bolts come from other side and bolt into starter and 1 bolt goes thru the starter into the bell housing/motor. Do the oposite to install. Here is a picture of your starter and a good place to purchase it. Wish you luck.

http://www.partsgeek.com/catalog/1993/ford/festiva/engine_electrical/starter.html

Jan 25, 2010 | 1993 Ford Festiva

Not finding what you are looking for?
1993 Oldsmobile Cutlass Ciera Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...