Question about Cars & Trucks

Open Question

Head torque settings - fiat siena 16v

What is the head toraque settings on a fiat siena 2002 model 16v

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
NismoMaster
  • 146 Answers

SOURCE: torque settings for cylinder head nissan sentra

Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Posted on Jul 26, 2009

Ad
TDISLine
  • 1874 Answers

SOURCE: need torque settings for cylinder

Torque settings for cylinder head bolts for Skoda Fabia 1.4 16v

Cylinder head bolts tightening order:

tdisline_116.jpg

IMPORTANT NOTE: RENEW BOLTS!

Stage 1: Tightening torque = 30 Nm
Stage 1: Tightening torque = 90 Degrees
Stage 1: Tightening torque = 90 Degrees

Please do rate my response. Thanks!

Posted on Dec 18, 2010

TDISLine
  • 1874 Answers

SOURCE: what is the cyl head

Cylinder head instructions

tdisline_358.jpg
Cylinder head torque setting for 2005 VW Golf 1.4 FSI
Renew bolts
Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Posted on Mar 24, 2011

TDISLine
  • 1874 Answers

SOURCE: TORQUE SETTINGS FOR 1.4 16V

Cylinder head instructions

Tightening sequence
tdisline_536.jpg
Cylinder head torque setting for 2004 VW 1.4L 16V fitted in Seat Leon
Renew bolts

Stage 1 = 30 Nm
Stage 2 = 90 degrees
Stage 3 = 90 degrees

Posted on May 17, 2011

  • 1 Answer

SOURCE: WANT TORQUE SETTINGS FOR FIAT UNO ON HEAD, BIGENDS...

Fiat uno mia 1100 toque settings

Posted on Jul 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i download a workshop manual for a 2002 fiat siena 1600 elx


http://www.usse-natation.com/manual-for-fiat-siena-2003.pdf

Jun 12, 2017 | Fiat Cars & Trucks

1 Answer

Fly wheel torque for fiat siena 1,2 2001


Flywheel bolts (always use new bolts)
15Nm / 11 lbf/ft
Then a further 40 degrees of bolt head rotation..

Jun 18, 2016 | Fiat Cars & Trucks

1 Answer

What is the torque settings on a fiat strada 1.6 16v elx 2005 model for head and cams please


Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Jun 03, 2016 | Fiat Cars & Trucks

1 Answer

How to set cam timing on fiat siena elx 2002 model 1600 16 valve


cam and crank should have marks on them . buy a manual and read up on setting the timing .

Jul 09, 2015 | Fiat Cars & Trucks

1 Answer

Camshaft valve timing marks for Fiat Siena 1.6 16V, 1995 to 2002 model


there are no timing marks for camshafts you need a fiat tool to lock the cams rear of engine but if you mark the cam sprockets carefully before you dismantle you should be ok if not borrow the fiat tools the crankshaft marks are on the front pulley end about @aprox.10oclock position

May 27, 2015 | Fiat Siena Cars & Trucks

1 Answer

Torque settings on a fiat uno 1100 engine


Answer barbo(fiat mechanic) Fiat do not issue torque settings for a punto they use angles so that you can snap your stretch bolts! after contacting fiat and haynes neither of them would give proper torque settings, so i delved into my many tech manuals on fiat fire engines which is what is in your punto and i have successfully changed many fiat punto head gaskets using the following torque settings: stage 1 starting from the centre head bolts tighten to 33nm: stage 2:65nm and finally stage 3: 96nm these torque settings work fine and will probably save you buying new head bolts.

Oct 29, 2014 | Cars & Trucks

1 Answer

Crank torque settings for fiat siena 1.2 mpi


the crank has many spots to torque
the mains.
the rod caps
the front pulley
the flyhweel.
a fiat GMC, well , we dont have those but you can get any FSM for car and its all there.
1995 FIAT? 1.2L MPI.

Jun 15, 2014 | 1995 GMC Jimmy

1 Answer

Replacing plugs on a fiat siena


Get the Chiltons or Haynes book on the car, it will help you.

Nov 26, 2013 | Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

420 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...