Question about 2003 Honda Odyssey

2 Answers

Key won't turn in ignition

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 21,873 Answers

The list of possible causes includes the key, the lock cylinder, the steering wheel lock, and other things.
Have you tried another key ?

Posted on May 03, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 2,899 Answers

If steering wheel is left full turn to one side, it puts pressure on the key. When you try to start, hold full pressure on the steering wheel to the left or right to relieve pressure on the key. Then the key should turn.
Hope this helps.

Posted on Mar 25, 2015

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 752 Answers

SOURCE: 1999 Honda Oyssey ignition key

Drop bottom cover of steering wheel and see if steel starting shaft will move.

Posted on May 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toyota rav 4


ignition keylock cylinder broken or could have the wrong ignition key.

May 06, 2013 | 1998 Toyota RAV4

1 Answer

The 'key in ignition' warning sound won't turn off and my battery went dead. How do I get it to turn off?


Pull the Battery Post off the Battery then the fuse If that don,t work Cut the Horn Wire To It

Mar 04, 2013 | 2004 Ford Windstar

1 Answer

I replaced the ignition lock cylinder in my 92 cabriolet and I turned the key and it started first swing, then I was putting the steering wheel covers back on and it just turned off... When I try to turn...


If it's an automatic check fuse #15 wether it's a stick or automatic you should have power at the red & black wire coming out of your ignition switch when you turn key to start postion and power at the red wire going into switch at all times. if no power coming oit on the red/black wire you need an ignition switch. if there is power coming out of switch try putting car in nuetral (for auto trans). if still nothing you'll need to check for power at small wire going to starter when key is turned to start. if has power then need starter if no power you'll need to check starter interlock relay.

Dec 31, 2012 | Cars & Trucks

1 Answer

Stuck eldorado key in DTS ignition now car won't start


Make sure your steering wheel isn't locked. Sometimes a key won't turn until you jiggle the wheel while trying to turn the key.

Aug 21, 2012 | 2004 Cadillac DeVille DTS

1 Answer

Second Chip key for 2005 Aveo won't work


assuming the 2005 model year stil uses viper security systems...the chip in the key carries a magnetic resistance frequency. if the chip is damaged or corroded the frequency will change and wont engage the igntion. you can either get another key made (about 75 dollars) or bypass the ignition lockout feature.

May 18, 2012 | 2005 Chevrolet Aveo

1 Answer

How do I reset the security theft on a 1990 pontiac bonneville


This link will help you out. Has alot of information on the system.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Dec 22, 2011 | Cadillac DeVille Cars & Trucks

1 Answer

98 chevy cavalier turns over but won't start


i know industry jargon can be confusing, but lets try this. if it turns over but won't start, it could be your ''ignition module'' that sits on top of the vave cover on the motor or it might be the fuel pump or filter. make sure when you crank the engine that the key is all the way turned or it may not always make a proper contact to activate the ignition module. iv'e seen this before & had to change the ignition switch & all worked ok after that. i would need to know engine lt size to give you more details on the matter. please get back to me.

Nov 19, 2011 | 1998 Chevrolet Cavalier

1 Answer

1998 Plymouth grand voyager ignition won't turn


I have had this happen on my 98 Voyager. Just have a new key cut. This new key will sometimes cure the problem. The older keys get worn out and won't unlock the ignition. Try this before a much more expensive and time consuming change of the ignition.

Nov 01, 2011 | 1998 Plymouth Voyager

1 Answer

My key wont turn to off in order to remove my key from ignition while in parking


Ignition - Key Stuck In Ignition Switch/Won't Turn Bulletin No.: 06-02-35-005 Date: February 28, 2006 TECHNICAL Subject: Key Stuck in Ignition, Key Will Not Return to Off Position, Shifter Button Won't Release in Park Position (Adjust Shifter Detent Finger) Models: 2002-2005 Chevrolet Monte Carlo Condition Customers may comment on any of the following conditions: - The key is stuck in the ignition cylinder. - They cannot return the key to the off position to remove the key. - The shifter button won't release in the park position. Cause This condition may be caused by the detent finger shifting over time. This may result in mis-alignment and binding of the shift rod on the shift position guide.
WHERE YOUR SHIFTER IS YOU WILL HAVE TO TAKE IT APART ..MAYBE THE RUBBER BOOT IS IT THE WAY,OR THE SHIFT LOCK SELINOID WHENT BAD

Aug 05, 2011 | 2005 Chevrolet Monte Carlo

1 Answer

I have a 1998 Ford Windstar. Got in to drive, turned the key to start and 'snap' something seems to have broke within the ignition lock cylinder... all of the accessories are on... the key...


This happened to to me with my ranger. I went and bought in ignition and a junk yard and no problems after that. That way your not out of a lot of money.

Jun 02, 2011 | 1998 Ford Windstar

Not finding what you are looking for?
2003 Honda Odyssey Logo

773 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...