Question about 2010 Hyundai Santa Fe

Open Question

Santa fe RHS lower dash removal - 2010 Hyundai Santa Fe

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 57 Answers

SOURCE: need instructions on removing hyundai santa fe 01 fan belt ac

its your serpentine belt (thats what its called) and you will need a 3/8 ratchet and then find the belt tensioner. The tensioner has a spot where you need to put the ratchet into and pull or push depending on whatever way and that will releive the pressure off the belt so you can take it off.

Posted on Apr 17, 2009

Ad
  • 1596 Answers

SOURCE: lower ball joints and leaking boots on my 2004 2.7

Labor Skill
Level
Mfg.
Warranty
Standard Axle Shaft Replace Front Axle Intermediate Shaft B 0.9 1.3 Notes NOTE To R&R Inner Shaft Bearing and/or Dust Seal, Add B 0.1 0.1 Notes Axle Assembly One Side B 0.6 1.0 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Axle Shaft Seals, Add Each B 0.0 0.2 Notes Rear Axle One Side B 1.2 1.7 Notes NOTE To R&R Outer Joint and/or Boot, Add Each B 0.0 0.5 Notes To R&R Inner Joint and/or Boot, Add Each B 0.0 0.5 Notes

Posted on Apr 20, 2009

michigan man
  • 3533 Answers

SOURCE: how to remove alternator on 2002 hyudai santa fe 4 cylinder

try these websites to see if they have your car listed www.autozone.com and the other one is www.alldatadiy.com and if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car.

Posted on Jun 03, 2009

michigan man
  • 3533 Answers

SOURCE: how to change blower motor in a 2003 hyundai santa fe

try these two websites www.alldatadiy.com and www.autozone.com and you should be able to get pictures and diagrams showing you how to repair your truck

Posted on Aug 02, 2009

  • 2 Answers

SOURCE: removal of santa-fe gearbox

release the clutch arm of top of gaerbox and the gear box will move back no problem thats why you can only move it back to fly wheel teeth this is a push clutch thats how you release them

Posted on Aug 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clean a blocked scuttle drain in 2004 hyundai santa fe?


remove wiper blades and lower windscreen cover drainage pipes should be in far left and right corners also make sure that water is not coming from heater matrix

Jan 28, 2016 | 2004 Hyundai Santa Fe

1 Answer

Hyundai santa fe 2002 2.7 6 cilindro


check the gauges fuse. fuse panel is located on the drivers side lower dash about where your left knee is. please rate my answer :-)

May 10, 2014 | 2002 Hyundai Santa Fe

1 Answer

Location of heater fan on 2004 hyundai santa fe


most likely the passenger side under the dash

Dec 03, 2012 | 2004 Hyundai Santa Fe

1 Answer

Lower ball joint 2002 hyundi santa fe


Typically these are replaced with a complete lower control arm. What happens is the ball joint is reseeding the lower control arm and rusts. When the old ones pressed out it distorts the opening in the lower control arm. When the new one is pressed in they never fit tight. Anew lower control arm is very easy to replace. 1. Jack up the vehicle on the sub frame or pinch weld. 2. Remove the pinch bolt that holds the ball joint to the knuckle. 3. Separate the ball joint from the knuckle. 4. Remove the two bolts that secure the horizontal bushing to the sub frame. 5. Remove the single bolt that secures the vertical bushing from the subframe. 6. Remove the lower control arm. If you have any questions I'll be happy to answer them.

Sep 25, 2011 | 2002 Hyundai Santa Fe

1 Answer

On my 2002 Santa Fe, while playing the radio the speakers keep going on and off; but the cd player is fine. How would I gain access to replace the stereo?


to access the stereo you need to remove the dash piece around the control panel. after that you will see 2 or 4 screws holding in the stereo housing remove that and the stereo should slide right out. good luck.

Feb 06, 2011 | 2002 Hyundai Santa Fe

1 Answer

2001 hyundai santa fe, was running fine, went to crank it, all lights and chimes work, but it will not start. Not the battery, not the starter, thought possibly it was a transponder key, but was informed...


dear friend:this might sound stupid,but remove the key from the barrel and try again,then see if the dash lights dim when trying to start,if it does the battery is to flat to turn the engine,if it is a auto shift the lever slightly forward and backward to make sure it is not the neutral switch.

Sep 21, 2009 | 2001 Hyundai Santa Fe

1 Answer

Poor performance,hard on fuel,shifts all 5 gears at low rpm only


Hi,I would get the codes checked,possibly a faulty TPS or just that silly multi plug near the firewall RHS.

May 17, 2009 | 2004 Hyundai Santa Fe

1 Answer

WERE IS INER FUSE PANEL LOCATED IN 2004 SANTA FE


lt is under the steering wheel to the left, there is a removable access panel. Just look at the lower cover to the left, it should be marked with OBD-II

Apr 27, 2009 | 2004 Hyundai Santa Fe

1 Answer

Santa fe blower motor


1.disconect the neg. fron battery.
2.the blower unit is located under the dash and behind the glove box.
3.open the glove box disconnect the cord.push inwardson the sides to lower the door fully.
4.remove the dash panel to the right (has one screw)
5.remove the inner frame scrrews (four screws)
6.remove the blower/evaporator mounting bolts and remove blower motor.
7.tranfer the fan to new motor prior to installation.
8.installationis the reverse of removal.
f.y.i. use pliers to release and remove the clip holdin blower fan to th emotor

Dec 13, 2008 | 2003 Hyundai Santa Fe

Not finding what you are looking for?
2010 Hyundai Santa Fe Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8548 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...