Question about Cars & Trucks

Open Question

Mercedes w140 seat belt buckle

How do I replace the passenger side seat belt buckle?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 1999 Dodge 2500 passenger side seat belt wont release

so after completely tearing the seat apart I found 2 wires going up to the seat belt mechanism from under the seat, these wires got caught in the seat mechanism underneath and were shredded. There must be a small solenoid inside the seat belt mechanism because I could hear it click after I repaired the wires(this circuit is live even with the ignition off) Im not sure how it all works but this solved my problem.

Posted on Jun 12, 2008

  • 8 Answers

SOURCE: airbag light on

Most dealerships or garages with decent scan tools can find an air bag code if the light is on. The light might not turn itself off even when fixed and would have to be cleared. Also I've seen lights come on if someone has a large audio system installed and is drawing to much power. That is usually just a low voltage code with the system though.

Posted on Jan 28, 2009

polarcycle
  • 1392 Answers

SOURCE: Seat belt buckle receiver will

I guess you answered your own question.

Posted on Mar 06, 2009

jeffbvegas1
  • 520 Answers

SOURCE: how to replace seat belt buckle on Honda? civic

This rtequires seat removal in order to gain acces to the buck side mounting bolt

Posted on Sep 18, 2009

Testimonial: "Very helpfull"

  • 543 Answers

SOURCE: seat belt won't buckle

sounds like you need a new buckle assembly

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removal of front passenger seat on mercedes C 180 2008 model


Two Female Torx (E-30 i think) located front and rear of the seat slider (move the seat all the way back and then all the forward to expose them. WARNING ***DO NOT HAVE THE IGNITION ON WHEN DISCONNECTING THE ELECTRIC FROM THE SEAT AND SEAT BELT BUCKLE. It would cause the Airbag to be set off.

Oct 14, 2014 | 2008 Mercedes-Benz C 180

1 Answer

09 Camry Passenger Seat Belt Light always on, with or without a passenger?


Hi Chickgamerr, There is a micro switch fitted under the cushion of the seat and another in the buckle part of the seat belt. To get to the switch under the seat will mean removing the seat, which requires the two bolts at the front of the rail and the two at the rear being removed together with the electrical connector being disconnected. Lift the seat out and turn it upside down. The problem may be there or with the buckle switch, which may be frozen. Spray a little WD 40 into it and plug in and release the buckle a number of times to free it up. Refit everything and safe motoring. Regards John

Jan 27, 2013 | 2009 Toyota Camry LE

1 Answer

Seatbelt on passenger side want work


sounds like you have a buckle failure....this is the removal procedure...


  1. Remove the front seat.

110881806


  1. Disconnect the front safety belt buckle electrical connector.

110881807


  1. Remove the front safety belt buckle.
NOTE: The front safety belt buckle retaining bolt is part of the safety belt buckle and should not be separated.
Installation


110881808


  1. To install, reverse the removal procedure

Aug 11, 2011 | 1989 Jaguar XJ6

1 Answer

I have a 1994 mercedes SL320 Conv. the seat belt light on dash will not go out. any suggestions


faulty seat belt buckle or wiring, first check wiring for seat belt buckle if wiring and connectors are OK require new belt buckle, is this information helped you?

Oct 26, 2010 | Mercedes-Benz SL65 Cars & Trucks

1 Answer

My seat belt light is on when i have the seat belt on in toyota camry 1995


sensor may be stuck inside your seatbelt. spray a lube inside it and put it together and take it apart 5 or 6 times just to get it to loosen. do this to the passenger side as well. if this doesnt work then some cars have a sensor built into the seat that tells the car you have a passenger that isnt buckled. its possible that this sensor is stuck. should be located under seat but can be checked by simply buckling the passenger seat belt and seeing if the light goes out.

Aug 22, 2010 | Toyota Camry Cars & Trucks

2 Answers

BMW E36 AIRBA LIGHT IS ON HOW DO I RESET IT


there are dozens and dozens of little things in the system that can trip the light, the most common is the seat belt buckle sensor. also included in the seat belt buckle componentry is the tensioner, and maybe a couple of other related things (don't remember off the top of my head). but replacing the buckle involves replacing the entire tensioner unit anyway because they are conjoined. other things could be doing work on the steering wheel or passenger side dash without first disconnecting battery, or removing seats. i've tripped my light by removing the seats and removing the passenger airbag cover with the battery still on.

Aug 13, 2009 | 1999 BMW 318 ti

2 Answers

Srs reset


Here's a quick check list for most common cost of SRS / Air bag problem.

Dirty contacts on driver and passenger seat belt buckles

Dirty contacts on seat belt connectors (under seats)

Dirty contacts on driver and passenger sides weight sensors (under seat)

Seat covers

Weight on passenger seat
(Example: grocery package trigger SRS / Air Bag light on the way home.)

I recommend you to pass an vacuum over the contacts and use CRC electronic parts cleaner to rule out connectivity problem.

I DO NOT recommend disconnecting the negative battery connector to clean the code(s).

Without the code(s) the dealer will takes "BILLABLE" time to reproduce the problem.

======

Please rate my answer if it is useful to you.

Cheers,

Mustgo

Jul 12, 2009 | Mercedes-Benz E320 Cars & Trucks

2 Answers

SRS LIGHT ON, C200K MFG 2001


perhaps there is a problem with your airbags. take to mb dealer

May 26, 2009 | 2001 Mercedes-Benz C-Class

1 Answer

Passenger side seat belt buckle broken - can't find OEM replacemt


try a local wrecking yard most all years fit up to 2000

Dec 01, 2008 | 1993 Chevrolet C1500

1 Answer

Sat belt replacement


I need to replace the rear passenger-side seat belt buckle clasp but the clasp (under back seat) is connected to the seatbelt for middle backseat passenger.Can I replace just the passenger side without disturbing the middle belt?, cheers,Jen.

Oct 21, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...