Question about 2004 Toyota Corolla
Driver side windshield wiper not working
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The fuse is the 20 amp WIPER fuse, located in the fusebox under the driver side of the dash, farthest on the left, 2nd one up from the bottom.
Posted on Jan 02, 2009
SOURCE: windshield wiper
1) listen if windshield wiper motor is turning when switched on. The motor is under hood up near firewall.
If no noise and fuses are OK, motor may need replacement.
2) If motor can be heard whirring, then maybe the plastic link between the motor shaft and the wiper arm assy has worn or broken. (A very cheap part). This can be accessed by removing cowling or vents in front of windshield. This is a common failure.
Posted on Oct 26, 2008
SOURCE: Windshield Wipers
make sure the ground wire is conected and tight this could be the problem check all wires that bolt to frame and body for tightness, also check ones on the engine
Posted on Jul 03, 2008
SOURCE: my front windshield wiper pump
First make sure you have water in washer reservoir, with ignition on reds (not started) then get someone to operate washer while bonnet is closed otherwise the wipers (may come on) may damage your bonnet (would also be a good idea to throw some water on your screen before commencing), listen for a buzzing noise, if you can hear that noise than your washer motor is ok, if not - if fitted with fuse check it and if fuse is ok than your motor needs attention. If motor is ok than while someone is operating the washer motor look under the car to see if there is any water leaking, if there is water leaking than the hose going from your washer bottle to your washer nozzles has come off somewhere, visually check this hose, usually small diameter and clear in colour, reconnect or replace it. If there is no water leak and you have full water and motor is working, than your nozzle, usually located on the bonnet or wiper arms are blocked, this mainly happens after polishing the vehicle. There are 2 main ways of cleaning these nozzles, easiest way is to get a fine pin and poke it several times, this will clean it 85% of the time, if it does not work than you need to find the hose that connects to it and pull apart at a join, closer to the nozzle the better, and give it short burst of compressed air, have to be careful not to pop the hose out at the nozzle as some of them are located in really awkard points, hope this helps.
Posted on Apr 12, 2011
Tips for a great answer:
Sep 23, 2017 | Cars & Trucks
Apr 24, 2013 | Cars & Trucks
Feb 05, 2013 | Cars & Trucks
Dec 21, 2012 | 2005 Chrysler Pacifica
Nov 15, 2012 | 1998 Porsche Boxster
Dec 06, 2009 | 1994 Chevrolet Caprice Classic
Sep 22, 2009 | 2002 Chevrolet Malibu
197 people viewed this question
Usually answered in minutes!