Question about 2001 Chevrolet S-10
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
And some instructions
Caution: Allow the engine to cool before servicing the secondary air injection AIR system in order to reduce the chance of severe burns.
1. Remove the clamp from the check valve.
2. Disconnect the AIR hose from the check valve.
3. Remove the check valve from the left side AIR pipe.
4. Remove the left AIR pipe from the exhaust manifold.
5. Before replacing a check valve, test the valve for proper operation.
5.1. Install a vacuum pump to the nipple side of the check valve, AIR pump side.
5.2. Pump the vacuum pump to 10 inches Hg and observe the gauge.
5.3. Replace the check valve if the vacuum bleeds down to zero within 5 seconds.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
1.Install the check valve onto the AIR pipe.
Tighten the check valve to the AIR pipe to 23 N·m (17 lb ft).
2.Connect the AIR pipe to the exhaust manifold.
Tighten the AIR pipe to the exhaust manifold to 20 N·m (15 lb ft).
3. Install the AIR hose to the check valve.
4. Install the check valve clamp.
Posted on Jul 08, 2009
It may have caused poor mileage. Here is what is going on. http://www.obd-codes.com/p0410 Really a common issue on these trucks.
Posted on Mar 09, 2013
Tips for a great answer:
Jan 23, 2014 | 2001 Chevrolet Tahoe
Mar 09, 2013 | 2001 Chevrolet Blazer
Jan 31, 2012 | Cars & Trucks
Jul 31, 2017 | Chevrolet Malibu Cars & Trucks
Apr 17, 2011 | 2001 Chevrolet S-10
Feb 28, 2011 | 2007 Ford Focus (3 Door) Hatchback
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: