Question about Cars & Trucks

1 Answer

Bolts frozen on cailper and need to know how to loosen

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 21,873 Answers

Usually soaking the bolts overnight in Liquid Wrench, or using a torch are your main options.

Posted on May 02, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bolts in transmission sensor switch frozen


Try taping the head of the bolt, don't deform it though. If all else fails use a torch to heat it up then try.

May 10, 2013 | Cars & Trucks

1 Answer

Rear brake cailpers won't collapse on 2007 ford fusion


Open bleeder valve & push caliper piston, in as
you rotate piston to screw in parking brake

Do this by hand,only use a clamp on the front calipers

Apr 08, 2013 | 2008 Ford Fusion

1 Answer

06 MUSTANG REAR CAILPER NOT MOVING


if the brakes are ok, and the caliper is not working. it is either frozen, or you are in need of a new caliper. just replace it !! good-day !

Sep 11, 2011 | 2006 Ford Mustang

1 Answer

Dont know how to loosen or tighten the belt im trying to put on my car. the belt is connecting the alternator to the waterpump


You need to loosen the bolts that attach the alternator to the engine. Just loosen then a turn or so, don't remove them. Then there should be a long 10 or 12mm bolt attached to a bracket being held by one of those bolts attaching the alternator. One direction loosens while the other tightens the belt. When it is where you want it, retighten the alternator bolts and test.

Jun 06, 2011 | 2003 Mitsubishi Galant

2 Answers

Changing alternator on 99 dodge ram truck 5.9L engine...anything I need to do before loosening the alternator bolts?


always take the negative battery terminal off to avoid shorting the charge wire. Next, remove the serpentine belt by twisting the tensioner loose. Then you can remove the alternator bolts. Let me know if you have more questions.

Oct 22, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

How to replace a front wheel bearing


You'll need to remove the wheel, seperate the tierod end from the wheel spindle, remove the cailper and carrier from the wheel spindle, remove the axlenut, and unbolt the 2 bolts holding the spindle to the strut housing. You need to press out the wheel hub and remove the clips on either side of the bearing and press out the bearing from the spindle.

May 02, 2010 | 1996 Volkswagen Golf

2 Answers

We have a 1986 Ford Mustang that has a frozen bolt at the water pump. What tool do we need to get to remove this bolt without damaging the motor?


try getting it hot with a torch. if that dont do it then you will have to do what it takes including breaking the bolt, prying off the water pump and drilling out the broken piece. a trick i use on broken bolts that stick out even a little is i weld a nut on it and back it out with a wrench. it works 99.9% of the time.

Apr 09, 2010 | 1986 Ford Mustang

1 Answer

How do you replace front rotors on a 1990 toyota corolla


Remove the tire, next you will have to remove the two bolts holding the caliper on, swing the caliper out of the way, you may need to give the rotor a few taps to lossen, and it should come off fairly easy, make sure the new rotor is the correct size, next using one of the old pads you will need a C clamp to depress the piston to the in postion, after the piston is all the way in, you will snap the new pads into the caliper, now mount the caliper and secure the cailper with the two bolts.

Nov 23, 2009 | 1990 Toyota Corolla

1 Answer

Can I change the front breaks on my 1997 VW Jetta? I've done it on my old Chevy, and I'd like to save a bit and do it myself on the Jetta. Is this possible?


Sure, shouldn't be a problem for you, not much different from the old Chevys, but metric bolts, LOL. There will be two 13mm head bolts screwed into the sliders, you can use a 16mm wrench to hold the slider, remove the 2 bolts and the cailper will come off. Collapes the piston, and reinstall everything. Make sure you pump the brake pedal a few times before you take off.

Oct 17, 2009 | 1997 Volkswagen Jetta

1 Answer

Whindshield wipers stuck in a vertical position


This is an easy fix. Likely ice got on your windshield and froze your wipers to the glass then when turned on moved out of position. Take the cover off the base of the wipers and loosen the bolts. Put them down all the way and tighten. When wipers are turned on when frozen to glass the gears want to move but cant and loosens at the base. Please let me know if this does not help and will look into it further but this is probably it. Thanks

Jan 02, 2009 | 2005 Chevrolet Impala

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...