Question about 2005 Peugeot 206 1.6
Wipers our working but the water isn't coming out I put a new fuse in and it is still not working
Try a new motor ,these are notorious for packing up if you put blue liquid in it makes everything swell up and jam solid
Posted on May 02, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: peugeot 206 glowplugs
If your not good at mechanicing I suggest you take the car to someone that is experenced.
The reason I say this that we have loads of cars into the workshop with glowpugs broken in the head of the engine with the result of us having to remove the cylinder head.
What happens is that the tip of the glowplug breaks in the head when being removed if it is not done properly.
There is a way that we have found that they can be removed easily without breaking them.
Firsty run the car engine until warm, then we pour a little Diesel fuel onto each plug & let them sit for 15mins or so.
Then we remove them with a deep socket 1/4" drive so we don't put to much pressure on them.
they should screw out easily but we turn them out 1 whole turn then back a 1/4 add a little more diesel ( thimble full) & gently screw them out.
If they start to get really tight screw in again a little then screw out again.
The nuts that hold on the wires just need to be nipped up with a small 8mm spanner, but do not over tighten.
Posted on Dec 11, 2008
It sounds like your thermostat has gone bad and sticking close, Replace the Thermostat and Antifreeze. When replacing the thermostat, buy a fail safe thermostat so you will not have a overheating problem when the thermostat fails. Good luck and hope this helps. Keep me posted, be glad to help.
Posted on Jun 22, 2009
SOURCE: peugeot 206 cc fan belt change
hi ive a peugeot 206cc 02 reg, the STOP light keeps flashing ive checked the normal oil and water but alls ok so whats the problem still runs fine and temp stays where it should??? any tips??
Posted on Dec 28, 2009
When you can't find any fault code in ecu log then in my opinion its the wiper motor that has gone. May be motor has a broken pinion which doesn't engage the wiper arms properly and causes the problem. Buy a used wiper motor from ebay and give it a try. I hope that it'll work.
Posted on Jan 17, 2010
Tips for a great answer:
Nov 21, 2013 | 1999 Peugeot 206
Aug 15, 2013 | 2005 Peugeot 405
Mar 12, 2011 | Peugeot 405 Cars & Trucks
Feb 06, 2010 | 2005 Peugeot 405
Jan 11, 2010 | 2005 Peugeot 405
Mar 23, 2009 | Peugeot Liberte Cars & Trucks
112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: