Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There isn't a torque spec since those bearing are pre-loaded. You place the unit on a good known vic and get a breaker bar and you might even have to put an extention on that and you begin to tighten unitil you fell the bearing start to load...a little extra short turn wouldn't hurt at that point.
Posted on Oct 05, 2009
i read your report. It 155 to 210 foot lbs. I recommend start off your lowest settings. I wouldn't any higher then 195 foot lbs. hope this info helps you.TY you for writing to fix ya.
Best Regards Richard
Posted on Dec 03, 2009
Those values and most everything else you need for DIY work are contained in the Haynes manual for your vehicle.
We have one with each of our vehicles and not only give you the info needed to do repairs yourself but also get an idea of how much work a specific repair should (or shouldn't) cost.
'88 Chevy pickup manual
You can also buy these from auto parts stores for a few dollars less and sometimes on eBay for even less.
Posted on Feb 20, 2010
Tips for a great answer:
May 12, 2017 | 2001 Chevrolet Silverado 1500
Oct 16, 2010 | 2000 Chevrolet Silverado 2500
Feb 20, 2010 | 1988 Chevrolet C1500
Jan 24, 2010 | 1999 Chevrolet Silverado 1500
Dec 03, 2009 | 2003 Chevrolet Silverado 1500
Sep 14, 2009 | 2003 Chevrolet Silverado 1500
May 07, 2009 | 1977 Chevrolet Silverado 2500
Apr 24, 2009 | 2003 Chevrolet Silverado 1500
64 people viewed this question
Usually answered in minutes!