Question about Cars & Trucks

Open Question

Where is temperature blend door actuator on 2005 dts cadillac

How do you replace temperature blend door actuator on 2005 cadillac dts

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: constant high heat

on climate control press off and heat button and let go quickly. Then press automatic. The display will start rotating eventually displaying a code 025,125 , 024 etc. Then press defrost to stop. You may hear blend door operating atb that time. It worked for my climate control.

Posted on May 06, 2009

  • 1986 Answers

SOURCE: rear door panel 2002 cadillac dts

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • 5 Answers

SOURCE: how to replace blend door actuator in a ford

I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.

Posted on Dec 07, 2009

  • 1 Answer

SOURCE: how do I remove the dash to replace blend door

blender door on a 2003 grand marquis blows only hot air the ac works

Posted on Apr 05, 2010

  • 248 Answers

SOURCE: What do I have to remove to access blend door actuator

very lenghty process. too long to describe here....go to Bonneville Forums read the text and follow linked there at the bottom....very good and detailed....I'm doing that right now,,,,it is a bugger,

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of passenger side blend door actuator on 2006 mercury mountaineer auto controls, 6 cylinder


Temperature Blend Door Actuator - RH, EATC Removal and Installation
  1. Remove the RH floor console finish panel.
  1. Lower the glove compartment.
  1. Disconnect the RH temperature blend door actuator electrical connector.
  2. Remove the 3 RH temperature blend door actuator screws.
    1. Remove the RH temperature blend door actuator.
2006 2010 Ford Explorer NO Heat Passenger Temp Actuator Replacement same as mountaineer

Jun 19, 2017 | Mercury Cars & Trucks

1 Answer

How to replace the door blend actuator on 2009 lincoln mks


Right side or left ? Electronic Automatic Temperature Control or manual ? Temperature or mode door ?
Temperature Blend Door Actuator - LH Removal and Installation
NOTE: It is not required to install the new LH temperature blend door linkage parts included in the LH temperature blend door actuator service part kit if only the temperature blend door actuator requires replacement and the linkage parts are not broken or binding.
LH temperature blend door actuator and linkage
  1. Remove the 2 lower steering column opening cover bolts.
  1. Detach the lower steering column opening cover.
  1. Disconnect the in-vehicle temperature sensor aspirator hose and electrical connector.
  1. Position the instrument panel wire harness away from the LH temperature blend door actuator.
  1. Remove the 3 LH temperature blend door actuator screws.
  1. Disconnect the LH temperature blend door actuator electrical connector.
  1. Remove the LH temperature blend door actuator.
  1. Manually operate, and inspect the LH temperature blend door linkage for incorrect placement, binding or damage.
Temperature Blend Door Actuator - RH, Dual-Zone EATC Removal and Installation
NOTE: It is not required to install the new RH temperature blend door linkage parts included in the RH temperature blend door actuator service part kit if only the temperature blend door actuator requires replacement and the linkage parts are not broken or binding.
RH temperature blend door actuator and linkage
  1. Disconnect the glove compartment damper from the glove compartment.
  1. Remove the glove compartment.
  1. Remove the RH lower instrument panel insulator.
  1. Remove the RH lower floor console trim panel.
  1. Remove the 3 RH temperature blend door actuator screws.
  1. Disconnect the RH temperature blend door actuator electrical connector.
  1. Remove the RH temperature blend door actuator.
  1. Manually operate, and inspect the RH temperature blend door linkage for incorrect placement, binding or damage.
  2. Mode Door Actuator - Defrost/Panel/Floor Door
  3. Removal and Installation
    NOTE: The defrost/panel/floor mode door actuator can be accessed from below the driver side of the instrument panel.
    NOTE: It is not required to install the new defrost/panel/floor mode door linkage parts included in the defrost/panel/floor mode door actuator service part kit if only the mode door actuator requires replacement and the linkage parts are not broken or binding.
    Mode door actuator and linkage
    1. Remove the 3 defrost/panel/floor mode door actuator screws.
    1. Disconnect the defrost/panel/floor mode door actuator electrical connector.
    1. Remove the defrost/panel/floor mode door actuator.
    1. Manually operate, and inspect the defrost/panel/floor mode door linkage for incorrect placement or damage.
    Mode door actuator linkage only
    1. Remove the mode door linkage.
      1. Depress the tab and remove the panel door lever.
      1. Remove the floor/defrost door intermediate lever screw and floor/defrost door intermediate lever.
      1. Pull straight outward to remove the floor/defrost door lever.
    Mode door actuator and linkage
    1. NOTE: When installing the mode door actuator, make sure that the panel door lever and floor/defrost intermediate lever are correctly aligned with the mode door actuator cam.
      To install, reverse the removal procedure.

Nov 10, 2016 | 2009 Lincoln MKS

1 Answer

Blend door on 2003 montr carlo


How To Install Replace AC Heater Temperature Actuator ...

? 4:40
https://www.youtube.com/watch?v=mVP09M7hLB4
Jul 21, 2014 - Uploaded by 1A Auto Parts
http://www.1aauto.com/temperature-blend-door-actuator/i/ ... To Install Replace AC Heater Temperature Actuator 2000-05 ChevyMonte Carlo.

2006 Monte Carlo: Blend Door Actuator Replacement ...

? 2:19
https://www.youtube.com/watch?v=_B17o-Ljhfs
Mar 31, 2015 - Uploaded by Adam Strojny
In this video I will show you guys how to replace the actuators behind the glove compartment that where causing ...

Chevy Blend Door Actuator Replacement - Part 3 - YouTube

? 12:26
https://www.youtube.com/watch?v=1q9ugwlqDoo
May 14, 2013 - Uploaded by Dan Abbott
My final step to replacing the blend door actuator. ... Thanks for the video, need to do this on my 04 monte carlo ss, went to use the heat today .... 2003 Chevy Suburban AC-heater air direction problem.mov - Duration: 1:36. by ...


Dec 26, 2015 | Chevrolet Monte Carlo Cars & Trucks

1 Answer

I replaced the heat blend actuator because I was not getting any heat. Now, after replacing, all I get is hot air and no cold. The A/C was working fine just before replacing.


Do you have Manual Climate Control System or Dual Automatic Temperature Control System ?
The temperature control switch:
  • is a potentiometer that outputs a variable voltage to the temperature blend door actuator to set the position of the temperature blend door.
  • initiates closing of the heater control valve. When set to full COOL, a lever on the temperature blend door pivot shaft depresses the pintle of the heater control valve vacuum switch. The heater control valve vacuum switch then applies vacuum to the heater control valve, closing off engine coolant flow to the heater core.
  • is serviced only with the climate control assembly.
You may have disturbed something when changing the actuator , the vacuum switch o vacuum hose .

Oct 21, 2015 | 2005 Ford Explorer XLT

1 Answer

Why 2005 pilot gets too much cabin heat even when turned off


There is blend door in vent channels under the dash of the vehicle. It blends warm and cool air in the vents depending on the temperature setting. The Blend Door is controlled by a motor called an actuator that gets its signals from the setting on the dash. When the actuator fails the blend door can't move. If it stops on hot you always get hot air.
3 possibilitys
1. Blend Door stuck.
2. Temperature control not sending signal to actuator.
3. Actuator motor gone bad.

Of the 3 possibilities the actuator motor is the most common and the easiest to fix. The part is $40-90. I don't know exactly where actuator is on the Pilot. My GMC you remove the plastic trim below the dash and its just to the left of the glove box near the 'hump'. Perhaps the part store can tell you or someone else will offer the exact location.

Once you remove the actuator you can plug it back in to the wire clip and move the temperature knob and see if it moves. When you get the new one plug it in and make sure it turns before bolting it in.

To clarify a bit. The heater is never technically turned off. The blend door determines how much it goes thru the vents.

May 04, 2014 | 2005 Honda Pilot

1 Answer

2005 chrysler town and country Automatic temperature control unit does not heat


Air Temperature Control Blend Door Failure No Heat

In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air from the AC and the heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most common complaint is no heat but it can be no AC as well. To replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive repair.

Oct 30, 2012 | Cars & Trucks

1 Answer

How do I fix heater on my Cadi deville


Air Temperature Control Blend Door Failure

In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air from the AC and the heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most common complaint is no heat but it can be no AC as well. To replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive repair.



Oct 30, 2012 | 1999 Cadillac DeVille

2 Answers

2003 mercury grand marquis LS heater does notr blow hot air, blower blows but cold air comes what is the problem


The blend door is stuck in cold position. That usually happens because the blend door actuator has failed.

You will need to test and replace the blend door actuator.

To replace the actuator you will need to take apart the dash and remove completely the instrument panel,d isconnect the connector, remove the four screws, remove the temperature blend door actuator and replace it.

The replacement is not a job for beginners, since you have to take apart the dash to access the actuator.

Regards.


Nov 18, 2009 | Mercury Grand Marquis Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...