Question about Cars & Trucks

Open Question

Ignis sport engine light flashing and sounds like running on 3 cylinders?

Ignis sport engine light flashing and running poor sounds like running on 3 cylinders

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: engine light flashing

It sounds like you have a misfire. Anytime a misfire is detected by the powertrain control module (PCM) it flashes the check engine light (CEL) on and off. Do not drive it this way because it won't take long to damage the catalytic converter. Have the diagnostic trouble code (DTC) read with a scan tool or "code reader" to see what DTC or DTCs are set. If it's a 4 cylinder, it will have a P0301 set for a cylinder # 1 misfire, a P0302 for a cyl # 2 misfire & so on. If the misfire is random (ocurring in multiple cylinders intermittently) it will have a P0300 set. Once you know which cylinder is misfiring you can check that cyl to see what the cause might be. It could be an ignition coil or spark plug failure. The # 1 cyl is always the one closest to the front of the eng or this car, the one closest to the passenger side fender.

Posted on Dec 16, 2008

Ad
inspectmycar
  • 233 Answers

SOURCE: Thickness of brake disks for Suzuki Ignis Sport 109 HP, 2004

Generally you do not want to let them wear anymore than 1/16 of an inch either inner or outer pad. The inner pad will wear a little faster than the outer, but you will want to go by which ever one is thinner. As far as the parameters of new disk, they will have a minimum thickness per DOT standards. The minimum thickness is usually stamped on the disk (rotor), if it is not you can get this info from your local repair shop, or auto supply shop.

Posted on Nov 10, 2009

SOURCE: Car coded yesterday p0303 noe check engine light flashing

The only thing left is the injector or a vacuum leak on the manifold gasket sucking air in and causing a lean condition. Thats is its the only common issue providing you dont have a head gasket issue leaking coolant on that cylinder and the compression and valves are not leaking. The old spark plug should show a coolant issue if present. The white part will be shiney if you have a coolant loss. If the coolant is looking real dark you should have the cooling system checked for gas being pushed into the cooling system on compression stroke thru the head gasket.

Posted on Nov 12, 2009

wracefans24
  • 1985 Answers

SOURCE: I have a 1999 Mercury

check for dirt or rust in those injector screens

Posted on Jan 03, 2010

ZJLimited
  • 17970 Answers

SOURCE: I have a 2000 jeep

Disconnected the negative battery few minutes. THis reset the PCM, if the check turn on again, need scanned to know excatly what code you have there.

Posted on Aug 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 explorer cylinder 123 misfire


So am I to assume that this is a 3.0L V6 vehicle? Does the engine run OK or does it exhibit a rough idle and poor performance? When you say 123 misfire.. do you mean it had codes P0301, P0302,& P0303 in the pcm codes? If these codes are still there and the engine is running poorly, then you still have a misfire on these cylinders.. it may have not been ignition related. Fuel problems and compression problems can also contribute to a misfire. You may need to take vehicle to a reputable shop and have it diagnosed by them.

Apr 26, 2014 | 2002 Ford Explorer

1 Answer

Ignis 1.5 sport 04


post all signs of overheating.
  1. dash guage
  2. STEAM eruptions>?
  3. AF (antifreeze ) leaks?
  4. CHeck engine light sticks on running?
  5. Scan tool shows way hotter than 200F? "ECT PID" parameter.
  6. oil in the AF? cold you see oil floating in the neck of the rad cap off?
  7. AF found on the A/T tranny dip stick end?
  8. Loosing coolant (drops) all the time, Check rad directly cold.?
  9. engine pings, (knock/detonation) ?
  10. lost power. from engine.
  11. shaking of engine. as it misfires.
  12. car heater makes this odd gurgling sound?
those are the signs but. what about precondtions.
overheats only parked< and never moving fast>
yes, bad RAD fan, (or its controls)
over heats all the time>?
fan belt fell off or slips?
clogged, rad tubes. (inside)?
water pump bad, blades, rusted to nothing.?
thermostat died, as most do way before 10 years,,,,,,,
clogged system from not doing the 2year service.

Mar 15, 2014 | Suzuki Cars & Trucks

1 Answer

Mitsubishi shogun sport 2001 2.5 sounds like its running on 3 cylinders blows black smoke. also when you rev the engine it revs out, i turn the car off and its still reving out and have to stall it f


sounds like its running on the engine oil sometimes the air in take system can pull the oil from sump and engineruns on the oil .very dangerous cause no control on engine
have you over fillled it with oil this can cause your problem

Oct 07, 2012 | Cars & Trucks

1 Answer

My 2004 Ford Escape has a bad miss as if it's only running on three cylenders, and some times will not start after the engin is warmed up.After it sets for several hours, it wil usually start, but run...


i have aford escape 2004 mdl only 3 cylinders running the first cylinder has a poor connections the check engine light stay on i have it read on a computer it says p0171 system too lean bank 1 what does this mean?

Aug 21, 2011 | 2004 Ford Escape

1 Answer

2003 pontiac sunfire 2.2L, idiling rough and runs rough with poor power, sounding as if it isrunning on less than 4 cylinders. problem started with no warning.check engine, troubleshooting light is...


if engine light is flashing it is not firing on all cylinders. a scanner will tell you what cylinders are misfiring. could be plugs. coil or other problem

Feb 26, 2011 | 2003 Pontiac Sunfire

3 Answers

When i am driving my suzuki ignis (1.3,manual,2001)in a traffic(more than 45 mins)engine starts to miss(check light indicates) and it stops.cant start it for about 10-15 mins


I have a 2001 Suzuki Ignis and I have a similar problem. When I start the engine 5 beeps are heard and the hazard lights turn off and on with each beep. Also after I have been driving for about 45 mins 3 beeps are heard and the hazard lights turn off and on again. However my engine does not stop running. I have asked people about it and they think that it has something to do with a lose wire in the security system? Any help would be greatly appreciated!

Oct 11, 2010 | 2001 Suzuki Swift

1 Answer

Not running on 4 cylinders . changed coil pack injectors new leads unplug tps sounds a little bit better plug back in an runs very rough


Check each cylinder using a timing light.
Check each cylinder using a noid test tool
If the light flashes while the engine is runing the spark to the cylinder is good.
If the noid lights up while the engine is running the fuel injectors are good.

Apr 05, 2010 | Daewoo Lanos Cars & Trucks

1 Answer

Engine skipping/misfiring, engine light flashing


Drive it into a dark place, or wait till dark. When it's running poorly, see if you can see any spark flying around. It sounds like plug wires.

Mar 04, 2009 | 1995 Mazda Millenia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...