How to connect a go'tech fuel management to a

It sounds like you have already replaced the ECU and the turbo actuator but are still having issues with the engine management light. If you haven't already, it's important to check the wiring harness to ensure that all of the connections are secure. Additionally, it's also possible that the issue could be related to the fuel system, in which case you may need to inspect the fuel lines and check for any clogs or blockages. If you have access to an English wire diagram for your Mitsubishi Canter 13C Euro 5 2011, that might help you pinpoint the issue.
Mitsubishi canter 13c euro 5 2011 engine management light on - Fixya
https://www.fixya.com/cars/t29915400-mitsubishi_canter_13c_euro_5_2011_engineSprinter Van 11 Most Common Problems (2002-2020) ' San Diego
https://www.sprinter.repair/11-common-sprinter-problemsSOLVED: How to reset oil light on Mitsubishi fuso fe160 ? - Fixya
https://www.fixya.com/cars/t25327758-reset_oil_light_mitsubishi_fuso_fe160

The only place to get a full wiring diagram is in a workshop manual. You can get part diagrams from Google

year make model (the part) wiring diagram

Then click on the images tab.

https://www.google.com/search?q=2000+dodge+grand+caravan+3.3+fuel+wiring+diagram

..

They are 2 ways to get this. An internet search using your year make and model car with the term fuel pump wiring or wiring diagram usually pulls up a collage of good diagrams. Or the autozone site has a help site at the bottom of its help page, There is a free part and a pay part, but free info will supply diagrams.

You can register on autozone's website and get access to basic repair info including wiring diagrams. The problem is going to be the wiring diagrams are filed under the component not the area of the car. So the fuel pump wiring is listed under fuel or engine management, the lights are under lights, and so on.

I have diagram for 99 jimmy, but diagram is showing incorrect labels on stock wires, so I;m stuck until I can get in touch with there tech.
Tech Support 1-800-363-8533

Heres a wiring diagram for the fuelpump.

wiring diagram available here http://www.cantyminiclub.com/tech.php
the pages they use are taken from the rover rave cdrom which is available on ebay for about 5 pounds. all the diagrams and diagnostics you require are on the rave cd.

pls send me your car chasis number to send the wiring diagram

dO NOT SPLICE WIRES.. You bought a 45000 dollar truck, spring for a wiring T --25 bucks.. ( plugs between main harness and Tail lights.. ) --Available at most good auto parts.. Painless wiring also has a kit.

If you did already cut or splice into your wires, take that **** loose.. Shrink wrap the dammage.. Silicone over srink wrap.. Wire will corrode.. if you did manage to get spliced wires to work,-- in a few years or sooner you will have issues with the connections..Can you say short circuit.. Moisture and loose connections are a thing of the past with sealed tap in wiring.. Plug and play..

If any of this is over your head, get a friend who knows, or a tech to help.. Don't jerry rig a 45,000 dollar new Truck.. Come ON..!!!!!