Question about Cars & Trucks

Open Question

Diagram for serpentine belt routing on 2003 ford expedition 4.6L

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7353 Answers

SOURCE: 1999 ford Taurus serpentine belt routing diagram

http://www.gates.com/common/part_locator/view_diagram.cfm?id=S7021

Posted on Nov 10, 2009

  • 451 Answers

SOURCE: 02 Ford Expedition need diagram change serpentine belt

log itno autozone.com

they have free tech solutions and diagrams...........

Posted on Feb 11, 2010

  • 1757 Answers

SOURCE: serpentine belt routing diagram

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies....
http://www.2carpros.com/car_repair_information/year/1998/make/ford/model/contour/1998_ford_contour_drive_belt_routing_diagram.htm

Posted on Mar 06, 2010

ZJLimited
  • 17970 Answers

SOURCE: need routing diagram for 1998 ford expedition

Check this...

82aa4ca.gif

Other details can find in 1998_ford_expedition_drive_belt_routing_diagram

Hope helps (remember comment and rated this).



Posted on Jul 22, 2010

  • 80 Answers

SOURCE: serpentine belt routing diagram 1997 ford escort

with a/cc087c9a.gif

9248ad9.gif witout a/c

hope this helps
Jay

Posted on Jul 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alternator


Here you go. Hope this helps :)

Instructions
    • 1
      Lift the Expedition's hood manually. Remove the negative battery cable end from the negative battery terminal using the battery wrench. Make sure to put the cable end in a place where it cannot accidentally contact the battery during the repairicon1.png.
    • 2
      Examine the serpentine belt routing diagram for the location of the Expedition's automatic belt tensioner. The Expedition's belt routing diagram is on the fan shroud.


    • 3
      Move the automatic belt tensioner off the belt with the serpentine belt tool. Pull the belt off the alternator pulley by hand before releasing the pressure on the tensioner with the tool and allowing the tensioner to slowly move back into position.
    • 4
      Remove the Expedition's charging circuit harness from the back of the alternator by hand. Remove the ground strap for the alternator's ground stud using the socket set.
    • 5
      Remove the mounting bolts that hold the alternator to the alternator bracket using the socket set. Lift the alternator out of the Expedition's engine bay by hand. Set the replacement alternator into the alternator bracket manually.
    • 6
      Install the alternator mounting bolts by hand first and then tighten them with the socket set. Connect the charging circuit harness by hand. Bolt the ground strap to the ground stud with the socket set.
    • 7
      Reinstall the serpentine belt onto the alternator pulley by reversing your removal method. Bolt the negative battery cableicon1.png back onto the battery using the battery wrench. Close the Expedition's hood.

Jul 24, 2013 | 2001 Ford Expedition

1 Answer

How do I route the auxiliary drive belt on my 2003 1.4tdci ford fiesta


Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.

Feb 03, 2012 | 2005 Ford Fiesta 1.6

1 Answer

Need 2003 ford escort zx2 belt routing diagram


Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.

Jan 31, 2012 | 2001 Ford Escort ZX2

1 Answer

Serpentine belt routing diagram


Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.

Jan 20, 2012 | 2003 Ford Focus

1 Answer

Serpentine belt diagram for a 2003 Chevy unpalatable 4.3


Pop the hood of the car and locate the serpentine belt routing diagram. The diagram on the 2003 Chevrolet Impala is on top of the fan shroud. The diagram will be a picture of all of the accessory pulleys and how the serpentine belt is routed among the pulleys. This diagram will give you the exact direction for routing the new belt onto the pulleys. If you cannot find a serpentine belt routing diagram, take a notepad and pen and draw out the exact routing diagram of the old belt across the pulleys.

  • 2 Locate the serpentine belt tensioner. It is located below the alternator on the left front side of the engine. The tensioner on the 3.4 liter, 3.5 liter and the 3.9 liter engines will require a 3/8 ratchet to release the belt tensioner. The 3.8 liter engine will require a ratchet and a 15 mm socket for the belt tensioner. Rotate the belt tensioner clockwise to loosen and remove the belt from the belt tensioner pulley.
  • 3 Slide the old belt from the belt tensioner pulley. Remove the belt from the remaining pulleys and pull the belt from the engine compartment.
  • 4 Route the new belt across the crankshaft pulley first. The crankshaft pulley is the big pulley on the bottom of the engine in the center. Then route the serpentine belt across the remaining pulleys as directed by the serpentine belt routing diagram. Leave the belt tensioner pulley for last.
  • 5 Rotate the belt tensioner clockwise again to relieve the tension and slide the new belt across the top of the belt tensioner pulley. Release the belt tensioner and the belt will tighten up as the tensioner applies pressure to the belt. Make sure the new belt is properly seated in all the pulleys.
  • 6 Crank the engine and inspect the belt again to make sure that it stays seated in the pulleys.

  • Read more: How to Replace a Serpentine Belt on a 2003 Chevrolet Impala ' eHow.co.uk http://www.ehow.co.uk/how_6120665_replace-belt-2003-chevrolet-impala.html#ixzz1Yi6QLAjb

    Sep 21, 2011 | 2003 Chevrolet Impala

    1 Answer

    2003 Ford Taurus Serpentine Belt routing diagram


    There are 2 engines listed at AutoZone.com. One has power steering pump on top, other has it in front (near rdiator).


    0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine



    0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine

    Aug 29, 2010 | Ford Taurus Cars & Trucks

    1 Answer

    How do I install the serpentine belt on a 2003 Ford expedition?


    Hello,Locate the serpentine belt tensioner on the front of the engine.The tensioner is what keeps tension on the belt and keeps the belt from coming off.The tensioner will have a bolt head in the middle of it that a 15mm socket will fit
    STEP 2:Look on the hood base where the hood lock attaches to the base and see if there is a belt diagram.This diagram will give you the exact instruction for properly routing the belt across the pulleys.If there is no diagram there,you will need to write down the exact routing of the belt on the pulleys on a notepad
    STEP 3:Put the 15mm socket onto the ratchet and put the ratchet onto the bolt head on the belt tensioner.
    STEP 4:Turn the tensioner clockwise to relieve the tension on the belt and remove the belt from all of the pulleys
    STEPS 5:Remove the new serpentine belt the same way that the old one came off by following the belt routing diagram instruction.Do not put the belt across the tensioner until last.Keep in mind that the belt will only go on one way and be right.
    STEP 6:Put the ratchet with the 15mm socket back on the belt tensioner and rotate the tensioner clockwise to give you enough room to slide the new belt across the belt tensioner pulley.Slide the belt onto the belt tensioner pulley and release the belt tensioner.Look over the belt and double check to make sure that the belt is running across all of the
    pulleys correctly
    STEP 7:Crank the car and inspect that the belt is secure and is staying in the grooves on all of the pulleys.

    Thanks




    .

    May 29, 2010 | 2003 Ford Expedition

    1 Answer

    Looking for diagram of serpentine belt


    0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine


    0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine


    0996b43f80208ca1.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines


    0996b43f80208ca2.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine


    0996b43f80208c9f.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine


    0996b43f80208ca0.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Water pump drive belt routing-Ford 3.4L SHO engine
    i wasnt sure what engine you had hope this helps good luck

    Jan 15, 2010 | 2000 Ford Taurus

    5 Answers

    Serpentine belt replacement


    2.0L Engines
    See Figures 11, 12 and 13
    The accessory drive belt for 2.0L engines has no provision for manual belt adjustment, since these engines use an automatic belt tensioner. Drive belt slack is taken up by the automatic tensioner.
    Movement of the automatic tensioner assembly during engine operation is not a sign of a malfunctioning tensioner. This movement is the tensioner self-adjusting and is required to maintain constant belt tension.
    The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
    0900c1528008d836.jpgFig. 11: Drive belt routing-2.0L SOHC engine with A/C 0900c1528008d837.jpgFig. 12: Drive belt routing-2.0L SOHC engine without A/C 0900c1528008d838.jpgFig. 13: Drive belt routing-2.0L DOHC engine

    Jul 24, 2008 | 1999 Ford Escort

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    85 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...