Question about Saturn Vue

1 Answer

When I went to shut off the heated seat the button fell in and now the heat is on all the time....is there a way to pull the console to get it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 76,070 Answers

What year is it?

Posted on May 01, 2013

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 512 Answers

SOURCE: heated seats button blinks and

it is in a self diagnostic mode ...its trying to tell you the the heat element is malfunctioning...depending on the sequence of flashes the element maybe shorted or open

Posted on Nov 09, 2008

emissionwiz
  • 76070 Answers

SOURCE: heated seats 1999 lincoln navigator

the fuse is #110, it is in the power distribution box under the hood, it also runs the moon roof, so if the moon roof works the fuse is good, if this is the case the heated seat switch is the likely cause and by far the most common..

Posted on Dec 05, 2008

  • 7353 Answers

SOURCE: 2003 Suburban---Heated leather seat problem

there may be a software issue, there is a reprogram for seat heater issues. Bulletin 05-08-50-008 may pertain to that, a AC DELCO Shop or the dealer can ck that and see if this bulletin applies.

Posted on Sep 29, 2009

  • 2 Answers

SOURCE: Heated Seats

I had the same problem on my 04 LeSabre. To check to see whether it was the element or the switch, I unplugged both seats and ran jumper wires to make left switch control the right element. The switch and element worked properly. Then I ran jumper wires to make right switch control the left element. The problem was the same, so it was the element was bad.

I had my element replaced at the dealership, since I didn't want to wreck my leather seats. It cost over $400 (about $150 for the element). I guess it just tucks next to the old element - the old element stays in place.

Posted on Nov 28, 2009

  • 1 Answer

SOURCE: Heated seats not working

Mine did the same thing this morning... mine is an 03 as well. Did you ever figure out what was wrong?

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does my 2009 Kia rondo LX have heated seats? I've seen no buttons or indicator light for this feature but DEFINITLY felt the seat heating up, no question it was warming.


If equipped with heated seats, there will be a switch to control their function. Usually located near the shifter or mounted close to the center of the dash console or even located on the seat itself. Check owners manual for heated seat operation and controls

Mar 10, 2016 | Kia Cars & Trucks

1 Answer

2010 Lincoln MKS Heated Seat on driver's side stopped working (Light in button turns off on its' own)


The most common cause of this problem is that the drivers seat heater grid is open or burned out. That is based on 25 years as a Ford dealer technician.

Feb 27, 2017 | Lincoln Cars & Trucks

1 Answer

Why heated seats on a 2008 saturn vue went cold.


They are timed like rear demist, the manufacturers reason this.... Starting a cold car takes time to warm up so they give us heated seating. As your journey continues the car gets warmer as the engine heat is directed towards the cabin via vent settings. The seats are power hungry and require much juice to heat so as the cabin temp rises, it takes over the job of heating your whole body and not just your posterior (so to speak), the seats will automatically switch off. Press the button again and they should come back on for the prescribed time.

Or could be a blown fuse !
Red.

Dec 03, 2014 | Saturn Cars & Trucks

1 Answer

2003 chevy avalanche heated seats wont stay on


The following diagnosis might be helpful if the vehicle exhibits the symptom s described in this PI. Condition Concern Driver and passenger heated seats inoperative or shut off in 30 seconds. There will be DTCs B2435, B2440, B3606 and or B1825 set in the Drivers Seat Module. The adjustable pedal position sensor, seat recliner position sensor and both heat seat thermistors share the same 5 volt reference internal to the Drivers Seat Module. A fault in any of these components circuits can make the heated seats inoperative or shut off in 30 seconds, as well as, the seat recliner and/or adjustment pedals may move in short increments when operated. A fault in heated seats, adjustable pedal or seat recliner will affect BOTH heated seats. Note Even if the vehicle is not equipped with adjustable pedals DTC B3606 still may set.Recommendation/Instructions To help isolate the area of concern use the Tech 2 and go to Sensor Data in the Drivers Seat Module. Monitor the following parameters for being out of range Recline Position Normal range .39V 4.58V Pedal Position if equipped Normal range .39V 4.58V Psgr. Seat Heat Sensor- Normal range 1V-4V Drvr. Seat Heat Sensor Normal range 1V 4V If a parameter is found to be out of range inspect circuits for any opens, shorts to ground, or voltage. If none found replace the suspect component Please be aware of the following common areas of concern The adjustable pedal position sensor internally shorted pulling the 5 volt reference low. Disconnect the adjustable pedal position sensor and see if the heated seats start working correctly, if so replace.Note Important The APP accelerator Pedal Position sensor is NOT the adjustable pedal position sensor. Make sure the correct sensor, adjustable pedal position sensor, is disconnected.The seat recliner position sensor internally shorted pulling the 5 volt reference low. Disconnect the recliner position sensor and see if heated seats start working correctly, if so replace.An open in either heated seat thermistor circuits signal or low reference The most common is the passenger thermistor where it passes through seat connector C305 pin L or K or C399 pins R or G A chaff to ground on either heated seat thermistor signal circuits. The most common is circuit 5475 black red or dark blue shorted to ground in the passenger seat near the buckle.Note Important The heated seat thermistors act differently to OPENS and SHORTS than the adjustable pedal position sensor and seat recliner position sensor. The adjustable pedals and seat recliner sensors can be disconnected for testing of the heated seats. Where as the heated seat thermistor circuit must be working correctly before EITHER heated seat will operate. Disconnecting one thermistor, which may have a concern will not allow the opposite heated seat to work correctly, BOTH side must be operational before EITHER heated seat will perate.Clearing DTCs If DTCs will not clear when using the Tech 2 after a repair has been made, try operating the device in which the repair was made. Example, if a repair was made to the passenger heated seat thermistor circuit, the DTCs may not clear unless the passenger heated seat is operated.Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed GM bulletins are intended for use by professional technicians, NOT a do it urselfer. They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

The purpose of this bulletin is to provide the technician with the following service nformation Heated Seats Switch Operation Heated Seats Switch Diagnostics Heated Seats Switch Customer Information Switch Operation The engine must be running for the heated seat feature to work. The heated seats will shut off automatically when the ignition is turned off.Two buttons, located on the door, are used to control the heated seat. Press the orizontal (RH) button to heat the entire seat, back and cushion. Press the vertical (LH) button to heat ONLY the seat back.The three light bars are an indicator of the level of heat selected for either the entire seat (horizontal button) or ONLY the seat back (vertical button) To heat both the seat back and seat cushion at the same time, press the horizontal (RH) button with the heated seat symbol one time. All 3 light bars will glow indicating the HIGH temperature etting.The horizontal (RH) button does NOT have an ON FF indicator light.Press the button a second time, 2 light bars will glow indicating the MEDIUM temperature setting for the entire seat.Press the button a third time, 1 light bar will glow indicating the LOW temperature setting for the entire seat.Press the button a fourth time to turn the entire heated seat OFF.To heat ONLY the seat back, press the vertical (LH) button one time. An ON FF indicator light over the heated seat back symbol will glow to designate that ONLY the seat back is being heated.All 3 light bars over the horizontal (RH) button will glow indicating the HIGH temperature setting for ONLY the seat back.Press the button a second time, 2 light bars will glow indicating the MEDIUM temperature setting for ONLY the seat back.Press the button a third time, 1 light bar will glow indicating the LOW temperature setting for ONLY the seat back.Press the button a fourth time to turn the heated seat back OFF.Switch Diagnostics mportant: In order to eliminate unnecessary part replacement and comeback repairs, it is essential that the appropriate diagnostic tables and aids found in the applicable manuals are followed.Verify the condition prior to making any repairs. Refer to Seats and Seat Controls in the applicable Owners Manual or this bulletin for proper heated seat switch operation information.If an improperly operating front heated seat condition exists, refer to the Diagnostic Information and Procedures in the Seats sub-section of the applicable Service Manual in order to diagnose the system accurately.When measuring the resistance of the seat heater elements, ensure the values are within the updated range of 1.5-5.5 ohms. Refer to DTC B2425 or B2430-Clearing the DTC in the Diagnostic Information and Procedures in the Seats sub-section of the applicable Service Manual.Customer Information Some heated seat components from the above listed vehicles have been returned to the Warranty Parts Center (WPC) for heat function not operating properly. Analyses of these parts show 'no out of specification condition' or No Trouble Found (NTF)Provide customers with the knowledge that if bumped, either one of the heated seat switches can be activated/deactivated accidentally.Ensure customers have a thorough understanding of how the heated seat switches function.GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

Oct 26, 2011 | 2003 Chevrolet Avalanche

1 Answer

2007 Lincoln Navigator heated/cooled seats won't turn on. When pressing the button, the light will show up, then go right off. Any ideas?


Has to be diagnosed with a scanner,only way
to look at system.

I have a 2004 Lincoln LS, that the dealer brought
in a seat specialist 3 times. Never worked more than 8 months
I only went there under warrantee

I have to pull the seat out, if it ever gets warm

We went throught 3 under seat blowers, and I have gone
through service bulletins,work shop manuals,nothing.

All Lincolns ,and big Ford suvs have the same issues
from 2003 on, as far as I know.

I will help a lot of people, when I figure it out.

The dealer as I said, bring in people,I guess they
don't have time or knowledge to deal with it.

Feb 21, 2011 | 2007 Lincoln Navigator Ultimate 4x4

2 Answers

I have a 2004 Chevy Silverado. The heated seat on the drivers side does not work. When you push the button to turn it on, the lights come on briefly then turn off.


Would you say it stays on about 30 seconds and does the passenger side do the same thing? If possible retrieving the codes will narrow down the search for a correct solution.If the passenger side is ok we may be able to eliminate the passenger side as bring part of the problem.Please advise so will know which way to go with your solution.


Condition/Concern:
Driver and passenger heated seats inoperative or shut off in 30 seconds. There will be DTCs B2435, B2440, B3606 and/or B1825 set in the Drivers Seat Module. The adjustable pedal position sensor, seat recliner position sensor and both heat seat thermistors share the same 5 volt reference internal to the Drivers Seat Module. A fault in any of these components/circuits can make the heated seats inoperative or shut off in 30 seconds, as well as, the seat recliner and/or adjustment pedals may move in short increments when operated. A fault in heated seats, adjustable pedal or seat recliner will affect BOTH heated seats.
Note:: Even if the vehicle is not equipped with adjustable pedals DTC B3606 still may set.


To help isolate the area of concern use the Tech 2 or a comparable scanner and go to "Sensor Data" in the Drivers Seat Module. Monitor the following parameters for being out of range:
Recline Position- Normal range .39V-4.58V
Pedal Position (if equipped) - Normal range .39V-4.58V
Psgr. Seat Heat Sensor- Normal range 1V-4V
Drvr. Seat Heat Sensor- Normal range 1V-4V
If a parameter is found to be out of range inspect circuits for any opens, shorts to ground, or voltage. If none found replace the suspect component.

Please be aware of the following common areas of concern:
  1. The adjustable pedal position sensor internally shorted pulling the 5 volt reference low. Disconnect the adjustable pedal position sensor and see if the heated seats start working correctly, if so replace. Note Important:: The APP (Accelerator Pedal Position) sensor is NOT the adjustable pedal position sensor. Make sure the correct sensor, adjustable pedal position sensor, is disconnected.
  2. The seat recliner position sensor internally shorted pulling the 5 volt reference low. Disconnect the recliner position sensor and see if heated seats start working correctly, if so replace.
  3. An open in either heated seat thermistor circuits (signal or low reference). The most common is the passenger thermistor where it passes through seat connector C305 pin "L" or "K" or C399 pins "R" or "G".
  4. A chaff to ground on either heated seat thermistor signal circuits. The most common is circuit 5475 black/red or dark blue shorted to ground in the passenger seat near the buckle. Note Important:: The heated seat thermistors act differently to "OPENS and SHORTS" than the adjustable pedal position sensor and seat recliner position sensor. The adjustable pedals and seat recliner sensors can be disconnected for testing of the heated seats. Where as the heated seat thermistor circuit must be working correctly before EITHER heated seat will operate. Disconnecting one thermistor, which may have a concern will not allow the opposite heated seat to work correctly, BOTH side must be operational before EITHER heated seat will operate.
Clearing DTCs
If DTCs will not clear when using the Tech 2 or comaparable scanner after a repair has been made, try operating the device in which the repair was made. Example, if a repair was made to the passenger heated seat thermistor circuit, the DTCs may not clear unless the passenger heated seat is operated.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.

Nov 17, 2010 | 2004 Chevrolet Silverado 2500HD

1 Answer

Having trouble removing the gear shifter panel to replace the lamp- it no longer lights up- for 1999 volvo s70


Great question.

You don't remove the shifter, you have to remove the panel around it first.
You start by removing the coin holder then the stuff holder, they just pop off. If you have heated seats then you pop the buttons from bellow and unplug them. Pull the panel up carefully. Sometimes spilled soda that got into the shifter cover make it stick like glue. I use plastic wedges to not damage anything, You can pull it up half way or just take it all of. The e-brake handle cover pops off too and just pop it off at the center console.
While your there make sure to wipe it all clean and retrieve all the coins that fell in. lol

Jan 10, 2010 | 1999 Volvo S70

1 Answer

The seat heater light comes on but can not be shut off and the seats do not heat


I had a simular problem, only it was on the driver's side only. If you push the button multiple times, it sometimes would go off.

To fix mine, I had to peel back the leather seat cover. There was a white pad with the heating elements (wires) going through it. I saw a dark brown spot where the wire got too hot and had broken. I pulled the wires left closer together and soldered them together. Then put the seat cover back on.

It has now worked for over a year like this.

If you are good at soldering, you may be able to fix it yourself (assuming this is the problem).

Oct 17, 2009 | 2003 Buick LeSabre

1 Answer

Air Conditioned Seat Not Working


check the rail system on the seat. sometimes it pulls the wire out and it doesn't get good enough connection

Jan 26, 2009 | 2004 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...