Question about Isuzu Cars & Trucks
Indicators not working, hazards not working
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: vw golf 1994 indicators
Most Golf and Jetta have their relays bunched together with the fuse block. Often, it would be inside the fuse box/compartment located under the facia panel, on the right-hand side, behind a removable cover. On most models, the flasher relay would be labeled 21.
Incidentally, sometime ago, there was a recall on some Golf where Volkswagen dealers will install a new hazard flasher switch/relay kit to remedy a common issue. You may want to try first Volkswagen at 1-800-822-8987.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards.
Thank you for using FixYa.
Posted on Jun 07, 2008
SOURCE: 1994 devilles flasher location
Turn signal flasher module is behind dash left of steering column near chime module. I have a 94 Seville and I had that same problem you need a Turn Signal Flasher Moduel, I forgot the proper term for it but I had to get mine replaced too. When I hit the signals to turn the side light would come on but the signal light wouldn't. Its a little box you get from Cadillac it only cost like $20 - $25 and you get it installed and trust. It'll work again. I just got mine done this week and my car now has turn signals again.
Posted on Dec 15, 2008
i believe the audi uses two relays for the turn signals and hazzard lights so it would appear the turn relay has failed. it should be located under the dash near the steer column.... seems to me me they have some shielding under the dash so it may be hard to get to.
Posted on May 23, 2009
SOURCE: 1997 sonoma turn signal flasher
The flashers are located behind the instrument panel trim, roughly between the base of the steering wheel and the ashtray, just to the left of the car lighter. To access the flashers, you need to at least loosen the lower instrument panel trim. Just under the steering column there are two screws with star heads. One to the left of the column and one to the right. You need to remove both of these screws. You will need to remove your ashtray. On the upper left corner of the hole left by removing the ashtray is a 9/32 hex head screw. You need to remove it. Once these three screws are removed you should be able to pull down on this portion of trim under your instrument cluster. When you do this it may cause trim around your instrument cluster to loosen that you can just pop back into place with your hand. You won't need to pull down to far on this trim piece as there are still some screws holding the bottom. You should be able to pull it down far enough to see the flasher units behind and just to the left of the cigarette lighter. There are two flasher units and I found that the one on the right is for the turn signals.On the left the other is for the hazard flashers. It may be a hand scraping experience to replace the flasher but it beats paying someone to do it for you. They are easy to recognize because the are silver and round metallic plug ins. The flasher unit on the left is for the emergency flashers and the one on the right is for turn signals. You can place the emergency flasher unit into the slot the turn signal unit belongs until you get a replacement. These flasher units are pretty cheap.
Posted on Jun 02, 2009
Tips for a great answer:
Sep 26, 2015 | Chrysler Cars & Trucks
May 01, 2014 | 1998 Ford Escort
Mar 18, 2014 | Holden Cars & Trucks
Oct 06, 2011 | 2003 Volkswagen Eurovan
Apr 01, 2011 | Ford Futura Cars & Trucks
Feb 01, 2010 | 2000 Hyundai Elantra
Jun 07, 2008 | 1994 Volkswagen Golf
138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: