Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its quite a job, but hopefully this helps you, i have already replaced my gfs transmission on her 2000 taurus once and i need to do it again, ford really sucked on these transmissions. if you jack up the car high enough to give you about 21/2 feet of pllay under the car it would be good, take the tires off, take the calipers off, disc brakes, nut on axles, rack and pinion to the spindle, shocks, everything that will get in the way when you bring down the bottom frame. under the hood, i take out the intake air box and battery with battery plate so it gives you room to disconnect the shift cable and all connections that need to be disconnected. now remember when you bring down this frame its going to come down with motor and tranny, so you gotta either get an engine hoist or put some blocks under the mottor,take the starter off, take the torque converter cover off from the bottom its right in the middle of the motor and tranny 2 screws, there are 4 nuts honding the torque converter in there so you will probably need the help of someone to turn the main pulley as you look for those 4 nuts, take all bolts holding the transmission in place, take axles off, 2 big nuts for the rack and pinion, 2 nuts for motor mounts (if you are under the car they are holding onto the squared frame, use a engine hoist to hold on to the motor and use a jack under to hold the tranny, now this is the tricky part, you might want to use a second jack to hold the frame, as you take off the 4 main bolts for the bottom frame leave one so it dosent come crashing down, if you have everything secure, take the last bolt off as you have the jack holding it in the front in place, when you take it off then bring the jack down slowly making sure you got all bolts and connections, once that is down make sure all bolts and connections are disconnected from transmission, there are 2 metal hoses that go into the front of the transmission that are a pain to get out, squeeze the 2 little plastic ears that it has as you try to pull the tip out, play with it cause sometimes they are a pain, once you have that, double check everything and you can wiggle the tranny to make sure its loose off the motor if it is, take precaution and bring the jack down slow to bring your transmition down. hope it helps if you know some basics of mechanical.
Posted on Jul 15, 2010
Tips for a great answer:
Mar 17, 2012 | 1996 Ford Taurus
Sep 27, 2011 | 1998 Ford Taurus
Dec 20, 2010 | 1994 Ford Taurus
Dec 03, 2010 | 2001 Ford Taurus
Oct 19, 2009 | 1995 Ford Taurus
Oct 04, 2009 | 1997 Ford Taurus
Sep 12, 2009 | 1999 Ford Taurus
Mar 31, 2009 | 1996 Ford Taurus
Mar 22, 2009 | 1996 Ford Taurus
15 people viewed this question
Usually answered in minutes!