Question about Cars & Trucks

Open Question

Exmark mower Ihave a liquid cooled 27 hp kawasaki with water in the oil. I have already machined the heads and replaced the gaskets. It still leaks. Any other things to try?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 43 Answers

SOURCE: I have a 2000 chevy venture with a blown head

sorry but that stuff only works for awile.just get the head gasket replaced.

Posted on Mar 30, 2009

  • 6982 Answers

SOURCE: leaking oil put of tail pipe, is the cooling sensor important, head gasket blown how do you know

Never seen oil come from tail pipe (unless a piston has a broken ring or a hole burned in it.) Cooling sensor tells the computer the engine temp and the computer turns the fan on through the fan relay. Very important for it to work. A blown head gasket will make the engine overheat, can cause white smoke from tailpipe, coolant loss and extremely rough running. Also can cause coolant in engine oil or oil in radiator. What you may be seeing may be water mixed with carbon from the inside of the pipe. Excessive water coming form pipe is also a head gasket symptom. A compression test or cylinder leakdown test or a radiator hydrocarbon test will tell you if gasket has failed.

Posted on May 14, 2009

  • 1341 Answers

SOURCE: oil in radiotor water

yes.It has.You should have leveled the gasket at a machine shop,have you done that?If not then that's why.

Posted on Jun 17, 2009

jentabby
  • 1 Answer

SOURCE: saturn sc1, oil leaking into antifreeze

We just went through the same thing on our 1997 SC1, replaced the head gasket and the oil in the coolant issue persisted.

Pulled a cylinder head out of a 1995 wagon and put it in, the problem has cleared up after a LOT of flushing with powered automatic dishwasher machine detergent and water. We also replaced the upper and lower radiator hoses, thermostat and water pump once the flushings were complete.


Posted on Jun 19, 2009

SOURCE: oil leak from the head gasket on my 1993 honda civic

dear friend-i do not think the oil comes from the hear gasket but rather from the distributor,make sure that the oil is not running down onto the head gasket and the shows as a oil leak from the gasket.

Posted on Nov 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I check for a blown head gasket on my 1990


Pretty much same answer as I gave for 87 Reliant see below. Shops have equipment to do cylinder leakage test. Do basic stuff below before doing last test ...cylinder leakage...which costs $$$.

Main point you are losing antifreeze/water. Check to see if you have water on the dipstick mixed in with oil. If so...probably a head gasket. If oil looks normal..... Before you do any test, tighten every hose connection. Check for loose connection into antifreeze reservoir. Sometimes there are small cracks on top which lets out pressure from cooling system. Look for leaks on water pump and radiator. Look at spot where you park the car...any liquid on floor? Not sure?..Put piece of cardboard under car to see if liquid is dripping from car. No leaks?...Start with a pressure test of the system. The pressure test is simply equipment that replace the radiator cap, a hand pump connected to it then air is pumped into cooling system. You watch the gauge to see if pressure is dropping. If pressure does not drop ..problem is most like a worn radiator pressure cap or stuck thermostat.. Do not buy the kind with button on cap to push down and release pressure. get original type and correct pressure. If overheating still, thermostat could be stuck, replace. Overheating of engine causes vapor lock, bubbles in fuel, which causes car to stall and kill. When cools off, fuel cools down and fuel will flow through fuel system again. Large amount of oil disappearing with overheating also sounds like head gasket or cracked head....Tighten up all bolts to gaskets, look for oil leaks on garage floor or driveway. If engine has developed a miss when running, pull plugs out and look for wet fouled plug. If antifreeze leaking into cylinder...plug tip will be whitish, if oil leaking into cylinder, grimey oil fouled. Do compression test on cylinder that is fouled and that will pinpoint if bad head gasket or cracked head. When doing compression test, radiator cap is removed and you listen to hear bubbles in radiator from the cylinder leaking into cooling system. 87 Reliant not worth pulling engine apart if head gasket or cracked head. Best oil treatment to reduce oil consumption is "Engine Restore" Used on my 58 Impala 348 tri power for 28 years. If I did not add it after oil changes it used oil and smoked....I swear by it for ANY engine after 100,000 miles.

Oct 19, 2014 | Cars & Trucks

2 Answers

I have oil leaking into cooling system, but no water in the engine. My oil level is dropping. What can cause this and what is the fix?


This is caused by a leaking head gasket. When a head gasket leaks you can get oil in the coolant or coolant in the oil of the engine or both. You will need to pull the cylinder head off, have it checked for cracks and if none are found have it machined flat again and replace the head gasket. Use only a quality head gasket set either from the Toyota dealer or a well known quality brand like Fel-Pro (available from NAPA and others). This is a job that requires some special tools and a great deal of car repair knowledge, time to do the job is about 6 hours.

Oct 18, 2011 | 1990 Toyota Corolla

1 Answer

My mazda b2200 truck loses water from the radiator at a very fast rate. It happens after travelling 5 km.Ihave changed the head gasket nothing has improved


You may have a cracked cylinder head. If water is not getting in the engine oil, run a cylinder leak down test and test for hydrocarbons in the cooling system.

Aug 04, 2011 | Mazda B2200 Cars & Trucks

1 Answer

My 1996 Monte Carlo is running hot but not overheating.. I keep having to put water in it... there is no hot air coming from the heater... and a really rusty liquid blew out of the overflow for the...


Is the car leaving puddles of coolant? It is usually pretty obvious if a water pump is leaking and is a good place to start if you are noticing puddles. If you are seing puddles you can get a pressure tester and pump up the cooling system and check for leaks. If not, the water has to be going somewhere and my guess would be a bad head gasket. The fact that you said that it blew rusty liquid out of the overflow suggests that exhaust is getting into your cooling system and is not good and means cracked head or bad head gasket. Does your oil look milky? If so that is not good and means either a bad head gasket, cracked head, or bad intake manifold gasket. Do you notice excess steam coming from the exhaust? Hope this helps.

Apr 17, 2011 | Chevrolet Monte Carlo Cars & Trucks

4 Answers

Loosing coolant no visible leaks about 1/2 gallon every 100 miles


How To Find & Fix Coolant Leaks

861e67b.gif

WHERE COOLANT LEAKS OCCUR
Coolant leaks can occur anywhere in the cooling system. Nine out of ten times, coolant leaks are easy to find because the coolant can be seen dripping, spraying, seeping or bubbling from the leaky component. Open the hood and visually inspect the engine and cooling system for any sign of liquid leaking from the engine, radiator or hoses. The color of the coolant may be green, orange or yellow depending on the type of antifreeze in the system. The most common places where coolant may be leaking are:
Water pump -- A bad shaft seal will allow coolant to dribble out of the vent hole just under the water pump pulley shaft. If the water pump is a two-piece unit with a backing plate, the gasket between the housing and back cover may be leaking. The gasket or o-ring that seals the pump to the engine front cover on cover-mounted water pumps can also leak coolant. Look for stains, discoloration or liquid coolant on the outside of the water pump or engine.

Radiator -- Radiators can develop leaks around upper or loser hose connections as a result of vibration. The seams where the core is mated to the end tanks is another place where leaks frequently develop, especially on aluminum radiators with plastic end tanks. On copper/brass radiators, leaks typically occur where the cooling tubes in the core are connected or soldered to the core headers. The core itself is also vulnerable to stone damage. Internal corrosion caused by old coolant that has never been changed can also eat through the metal in the radiator, causing it to leak.

Most cooling systems today are designed to operate at 8 to 14 psi. If the radiator can't hold pressure, your engine will overheat and lose coolant.

Hoses -- Cracks, pinholes or splits in a radiator hose or heater hose will leak coolant. A hose leak will usually send a stream of hot coolant spraying out of the hose. A corroded hose connection or a loose or damaged hose clamp may also allow coolant to leak from the end of a hose. Sometimes the leak may only occur once the hose gets hot and the pinhole or crack opens up.

Freeze plugs -- These are the casting plugs or expansion plugs in the sides of the engine block and/or cylinder head. The flat steel plugs corroded from the inside out, and may develop leaks that are hard to see because of the plug's location behind the exhaust manifold, engine mount or other engine accessories. On V6 and V8 blocks, the plugs are most easily inspected from underneath the vehicle.

Heater Core -- The heater core is located inside the heating ventilation and air conditioning (HVAC) unit under the dash. It is out of sight so you cannot see a leak directly. But if the heater core is leaking (or a hose connection to the heater core is leaking), coolant will be seeping out of the bottom of the HVAC unit and dripping on the floor inside the passenger compartment. Look for stains or wet spots on the bottom of the plastic HVAC case, or on the passenger side floor.

Intake Manifold gasket -- The gasket that seals the intake manifold to the cylinder heads may leak and allow coolant to enter the intake port, crankcase or dribble down the outside of the engine. Some engines such as General Motors 3.1L and 3.4L V6 engines as well as 4.3L, 5.0L and 5.7L V8s are notorious for leaky intake manifold gaskets. The intake manifold gaskets on these engines are plastic and often fail at 50,000 to 80,000 miles. Other troublesome applications include the intake manifold gaskets on Buick 3800 V6 and Ford 4.0L V6 engines.

INTERNAL COOLANT LEAKS
There are the worst kind of coolant leaks for two reasons. One is that they are impossible to see because they are hidden inside the engine. The other is that internal coolant leaks can be very expensive to repair.

Bad head gasket --Internal coolant leaks are most often due to a bad head gasket. The head gasket may leak coolant into a cylinder, or into the crankcase. Coolant leaks into the crankcase dilute the oil and can damage the bearings in your engine. A head gasket leaking coolant into a cylinder can foul the spark plug, and create a lot of white smoke in the exhaust. Adding sealer to the cooling system may plug the leak if it is not too bad, but eventually the head gasket will have to be replaced.

If you suspect a head gasket leak, have the cooling system pressure tested. If it fails to hold pressure, there is an internal leak. A "block tester" can also be used to diagnose a leaky head gasket. This device draws air from the cooling system into a chamber that contains a special blue colored leak detection liquid. Combustion gases will react with the liquid and cause it to change color from blue to green if the head gasket is leaking.

Head gasket failures are often the result of engine overheating (which may have occurred because of a coolant leak elsewhere in the cooling system, a bad thermostat, or an electric cooling fan not working). When the engine overheats, thermal expansion can crush and damage portions of the head gasket. This damaged areas may then start to leak combustion pressure and/or coolant.

Cracked Head or Block -- Internal coolant leaks can also occur if the cylinder head or engine block has a crack in a cooling jacket. A combustion chamber leak in the cylinder head or block will leak coolant into the cylinder. This dilutes the oil on the cylinder walls and can damage the piston and rings. If the coolant contains silicates (conventional green antifreeze), it can also foul the oxygen sensor and catalytic converter. If enough coolant leaks into the cylinder (as when the engine is sitting overnight), it may even hydro-lock the engine and prevent it from cranking when you try to start it. Internal leaks such as these can be diagnosed by pressure testing the cooling system or using a block checker.

A coolant leak into the crankcase is also bad news because it can damage the bearings. Coolant leaking into the crankcase will make the oil level on the dipstick appear to be higher than normal. The oil may also appear frothy, muddy or discolored because of the coolant contamination.

Leaky ATF oil cooler -- Internal coolant leakage can also occur in the automatic transmission fluid oil cooler inside the radiator. On most vehicles with automatic transmissions, ATF is routed through an oil cooler inside the radiator. If the tubing leaks, coolant can enter the transmission lines, contaminate the fluid and ruin the transmission. Red or brown drops of oil in the coolant would be a symptom of such a leak. Because the oil cooler is inside the radiator, the radiator must be replaced to eliminate the problem. The transmission fluid should also be changed.

continue...

Mar 12, 2010 | 1998 Oldsmobile 88

1 Answer

Loosing antifreeze


f735a20.gif

WHERE COOLANT LEAKS OCCUR
Coolant leaks can occur anywhere in the cooling system. Nine out of ten times, coolant leaks are easy to find because the coolant can be seen dripping, spraying, seeping or bubbling from the leaky component. Open the hood and visually inspect the engine and cooling system for any sign of liquid leaking from the engine, radiator or hoses. The color of the coolant may be green, orange or yellow depending on the type of antifreeze in the system. The most common places where coolant may be leaking are:
Water pump -- A bad shaft seal will allow coolant to dribble out of the vent hole just under the water pump pulley shaft. If the water pump is a two-piece unit with a backing plate, the gasket between the housing and back cover may be leaking. The gasket or o-ring that seals the pump to the engine front cover on cover-mounted water pumps can also leak coolant. Look for stains, discoloration or liquid coolant on the outside of the water pump or engine.

Radiator -- Radiators can develop leaks around upper or loser hose connections as a result of vibration. The seams where the core is mated to the end tanks is another place where leaks frequently develop, especially on aluminum radiators with plastic end tanks. On copper/brass radiators, leaks typically occur where the cooling tubes in the core are connected or soldered to the core headers. The core itself is also vulnerable to stone damage. Internal corrosion caused by old coolant that has never been changed can also eat through the metal in the radiator, causing it to leak.

Most cooling systems today are designed to operate at 8 to 14 psi. If the radiator can't hold pressure, your engine will overheat and lose coolant.

Hoses -- Cracks, pinholes or splits in a radiator hose or heater hose will leak coolant. A hose leak will usually send a stream of hot coolant spraying out of the hose. A corroded hose connection or a loose or damaged hose clamp may also allow coolant to leak from the end of a hose. Sometimes the leak may only occur once the hose gets hot and the pinhole or crack opens up.

Freeze plugs -- These are the casting plugs or expansion plugs in the sides of the engine block and/or cylinder head. The flat steel plugs corroded from the inside out, and may develop leaks that are hard to see because of the plug's location behind the exhaust manifold, engine mount or other engine accessories. On V6 and V8 blocks, the plugs are most easily inspected from underneath the vehicle.

Heater Core -- The heater core is located inside the heating ventilation and air conditioning (HVAC) unit under the dash. It is out of sight so you cannot see a leak directly. But if the heater core is leaking (or a hose connection to the heater core is leaking), coolant will be seeping out of the bottom of the HVAC unit and dripping on the floor inside the passenger compartment. Look for stains or wet spots on the bottom of the plastic HVAC case, or on the passenger side floor.

Intake Manifold gasket -- The gasket that seals the intake manifold to the cylinder heads may leak and allow coolant to enter the intake port, crankcase or dribble down the outside of the engine. Some engines such as General Motors 3.1L and 3.4L V6 engines as well as 4.3L, 5.0L and 5.7L V8s are notorious for leaky intake manifold gaskets. The intake manifold gaskets on these engines are plastic and often fail at 50,000 to 80,000 miles. Other troublesome applications include the intake manifold gaskets on Buick 3800 V6 and Ford 4.0L V6 engines.

INTERNAL COOLANT LEAKS
There are the worst kind of coolant leaks for two reasons. One is that they are impossible to see because they are hidden inside the engine. The other is that internal coolant leaks can be very expensive to repair.

Bad head gasket --Internal coolant leaks are most often due to a bad head gasket. The head gasket may leak coolant into a cylinder, or into the crankcase. Coolant leaks into the crankcase dilute the oil and can damage the bearings in your engine. A head gasket leaking coolant into a cylinder can foul the spark plug, and create a lot of white smoke in the exhaust. Adding sealer to the cooling system may plug the leak if it is not too bad, but eventually the head gasket will have to be replaced.

If you suspect a head gasket leak, have the cooling system pressure tested. If it fails to hold pressure, there is an internal leak. A "block tester" can also be used to diagnose a leaky head gasket. This device draws air from the cooling system into a chamber that contains a special blue colored leak detection liquid. Combustion gases will react with the liquid and cause it to change color from blue to green if the head gasket is leaking.

Head gasket failures are often the result of engine overheating (which may have occurred because of a coolant leak elsewhere in the cooling system, a bad thermostat, or an electric cooling fan not working). When the engine overheats, thermal expansion can crush and damage portions of the head gasket. This damaged areas may then start to leak combustion pressure and/or coolant.

Cracked Head or Block -- Internal coolant leaks can also occur if the cylinder head or engine block has a crack in a cooling jacket. A combustion chamber leak in the cylinder head or block will leak coolant into the cylinder. This dilutes the oil on the cylinder walls and can damage the piston and rings. If the coolant contains silicates (conventional green antifreeze), it can also foul the oxygen sensor and catalytic converter. If enough coolant leaks into the cylinder (as when the engine is sitting overnight), it may even hydro-lock the engine and prevent it from cranking when you try to start it. Internal leaks such as these can be diagnosed by pressure testing the cooling system or using a block checker.

A coolant leak into the crankcase is also bad news because it can damage the bearings. Coolant leaking into the crankcase will make the oil level on the dipstick appear to be higher than normal. The oil may also appear frothy, muddy or discolored because of the coolant contamination.

Leaky ATF oil cooler -- Internal coolant leakage can also occur in the automatic transmission fluid oil cooler inside the radiator. On most vehicles with automatic transmissions, ATF is routed through an oil cooler inside the radiator. If the tubing leaks, coolant can enter the transmission lines, contaminate the fluid and ruin the transmission. Red or brown drops of oil in the coolant would be a symptom of such a leak. Because the oil cooler is inside the radiator, the radiator must be replaced to eliminate the problem. The transmission fluid should also be changed.

continue..

Mar 12, 2010 | 2007 Hummer H3X

3 Answers

Audi A4 2.5 V6 TDI - Creamy grey coolant in expansion tank


Sounds like blown head gasket (or worse) still to me.
Remove oil filler cap and look for grey oil.
Never use water these days but special coolant. Water makes vapour spots and cause block cracks, worse then blown gaskets!!!
vapour does not cool very well.
Look like you have cracks already.
Take a compression test if possible. But might not show op at that temperature.
The gauge indication troubles me.

Apr 14, 2009 | 1998 Audi A4

2 Answers

Oil in over coolant tank


If there is oil inside the coolant liquid that is the head gasket.

Check first if oil can leak into the coolant tank from the cap.

Usually when you get oil into the coolant liquid you have an head gasket problem, do a compression test, or buy the home tester below.

eBay.co.uk Guides - HOW TO TEST FOR A FAILED HEAD GASKET
Head Gasket or Combustion Leak Test Procedure (Gasoline Engines Only)
Blown Head Gasket? how to check

Feb 17, 2009 | 1996 Chevrolet Monte Carlo

1 Answer

The head gasket biow from in out smal leak just hissing,bmw


with little knowledge of engines your asking for trouble !!!!!!!!!!

Dec 21, 2008 | 1993 BMW 7 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...