Question about Nissan Maxima

Open Question

Check eng. light code p1147

1998 nissan maxima car runs fine but light is on and gives code p1447

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75744 Answers

SOURCE: Check Engine Light 1996 Nissan Maxima

The best way is to use a scan tool to clear the codes, that will turn off the light, also disconnecting the battery over night may work, but no completely sure about that, it varies from year to year.

Posted on Sep 23, 2008

stevehinrich
  • 61 Answers

SOURCE: 1997 maxima emission code repair on 400 & 500

P0400 is auxillary emmisions control and P0500 is vehicle speed idle speed control auxiliary inputs.

Posted on Mar 02, 2009

mikehitchner
  • 28 Answers

SOURCE: 2000 NISSAN MAXIMA TRANSMISSION SLIPPING

If you havent already try to change the transmission filter.Sometimes when the filter gets dirty fluid pressure is comprimised and certain pumps and solenoids which control shifting inside the transmission function off of the fluid pressure,

Posted on Apr 12, 2009

redbeard00
  • 957 Answers

SOURCE: Washed eng. This morning car was fine now at about

P1361: top dead center sensor circuit. The crank positioning sensor and cam positioning sensor are the two components that you want to look at. One of the two parts are cracked and the water is causing a short. Once it dries out, it should go back to normal but you do need to replace the faulty sensor/s.

Posted on Jun 06, 2009

  • 81 Answers

SOURCE: I HAVE A 91 NISSAN MAXIMA. THE CAR WONT START

there might be a problem in your fuel line. try buying a can of sea foam [Red and white bottle.Available at any auto place. Around $9]. pouring about half in the tank and the other half thru a line in your brake booster or another vacuum line. the line will be under the hood to the very top right. it should be black, round, and two lines coming out of it. do this with the car running so maybe have someone else hold the gas to about 1500 RPM. Slowly drip the sea foam in until it almost dies then put your thumb on the line to keep it running. keep doing that until the can is almost or fully empty. Let the car sit for about 5 mionutes then start the car and keep the RPMs to about 2 grand. There will be smoke fromt the exhaust SO DONT WORRY! Just keep on the gas until the smokes clears. If that doesnt help let me know!

Posted on Oct 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Nissan maxima p1800 code and transmission issues, related??


Clean or replace the mass air flow sensor , clear codes and road test

May 12, 2014 | 2004 Nissan Maxima

2 Answers

I have 97 nissan 200sx 1.6 L It shows P1447 code would like to know how to fix this and also have a problem with distributor cap and rotor, they get a carbon build up on them and the car won't har


if they are getting carcon build up then you have a weak ignition control module and the wrong spark plugs . with the wrong spark plugs it is running and working hard

Dec 04, 2012 | 1997 Nissan 200SX

1 Answer

Code 1447 nissan sentra


P1447 purge volume control solenoid valve
Usually charcoal canister has ruptured and vehicle needs canister.
entire system will have charcoal pellets in it. pull the hose at solenoid and see. solenoid can sometimes be cleaned by tapping and blowing with your mouth not compressed air. sometimes needs to be replaced. remove canister and remove pressure sensor(by canister and blow out charcoal with compressed air. wear safety glasses. you will need to blow from both ends several times. don't give up at first nothing comes out and when you pull air gun away charcoal comes out on your hands from pressure release

Jun 01, 2012 | 1996 Nissan Maxima

1 Answer

1996nissan pickup/p1447


http://content.chiltonsonline.com/content/images/DiagRt/Nissan/1996%20Pickup/2.4L/P1447.pdf

Please let me know if you can open this. If not, let me know because this is all the info for the fault code that you have. I would post it but it is too large.

Dec 03, 2011 | Nissan Cars & Trucks

1 Answer

My 1997 Nissan Maxima check engine light comes on only on the second cycle after clearing the trouble code. Car runs good. No misfires or driveability problems. What the heck does is this all about? Could...


It could be a bad coil, nissan recommends uses there coils as aftermarket coils dont work, they will fire the cylinder but turn on the check engine light, you must use nissan coils, if you can give me the code that come up i can help you turn light off and solve the problem. good day

Oct 23, 2011 | 1997 Nissan Maxima

1 Answer

1996 nissan maxima check engine light came on. car runs fine all fluids are full and air filter is clean. possible reasons?


TAKE CAR TO ANY AUTO PARTS STORES THEY WILL CODE FAN FOR FREE AND GIVE YOU TROUBLE CODE.

May 03, 2011 | 1996 Nissan Maxima

1 Answer

P1447 and knock sensor code both knock sensor and evap purge valve are in perfect working order and vacuum hose are correct routing and no crack but engine light is still on please help cant pass...


If your map sensor is bad, it will also cause p1447 to illuminate.
You can check the air passage continuity on the map sensor/solenoid valve.
Provide the switch with 12 volts, please note which pin is positive and negative.
txtexan_0.gif


Check air passage continuity between A-B, A-C. My manual shows that if there is no continuity between A-B but there is between A-C then your map sensor/solenoid valve is bad and should be replaced.
It is listed as a cause for the p1447 light.
I hope this helps

Mar 27, 2011 | 1997 Nissan Maxima

1 Answer

1996 Maxima - Emissions (Diagnostic)Testing isn't reading


there is a section inthe manual that tells you how to prepare the car for emissions test which can take less than 2 hrs without driving 400 miles normally if there still a problem the check eng light will come back on shortly after the preperation. if the eng light comes on in acc position on igition switch and goes off the computer is fine.

Jan 06, 2009 | 2002 Nissan Maxima

1 Answer

GMC SAFFARI VAN (TRUCK) 1996


sound like ignition module do have a service eng light on??if so retrieve code that is a defeat route??

Dec 01, 2008 | 1994 Nissan Maxima

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

713 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...