Question about 2002 Volvo S60
Erro code052 what it means
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2001 volvo s-40
codep1618 indicates a failur in comunications between the engine control prosesor and the automatic trans axle prosesor.the ecm/pcm stores the trouble info as freeze frame 'and the check engine lamp(mil) will light.the mill will be turned off after 3 on the 3rd trip cycle if the foult is no longer present.the freeze frame info will clear after 40 consecutive worm-up cycle have ocurred with out a foult.
Posted on Sep 19, 2008
I think that you have a contaminated or bad Mass Air Flow (MAF) sensor. It's located by the engine air filter housing. You can get a used one online for less then 100.
Posted on Aug 11, 2009
THE 445 IS THE EVAP PURGE VALVE IT MAY BE BAD BOTH 446 IS SAME VAVLE YOU NEED TO SEE IF THE HOSE ARE GOOD ON THIS VAVLE MAKE SHERE NO CRACKS IF NOT PULL HOSES AND SEE IF SOMTHING IN VAVLE ITS NEAR THE CANSTER AND THAT IS NEAR THE GAS TANK UNDER CAR PUT CHECK GAS CAP MAKE SHERE ITS TIGHT HOPE THIS HELPS
Posted on Sep 15, 2009
Well Fault code EGR 241 means EGR flow too low. This means either- open circuit in the EGR controller signal circuit, no EGR flow into controller, faulty EGR controller, faulty vacuum hoses, or clogged EGR valve.
If you like to reset this code please follow the below steps -
Reset system; Ignition off
Stick the flylead attached to the cover into A2 socket
press the button next to the led once for about five seconds
red LED will light
when lit, press the button next to the led again for about five seconds
red LED goes out
Ignition off, keep the flylead attached to the cover into A2 socket
press button once for a second, ensure codes are cleared
or write down code(s) repeat code gathering procedure.
Posted on Mar 26, 2010
SOURCE: Volvo S60 Fault code 045
Take your car, if possible to drive, to a local auto parts store. Here they should be able to perform a free (usually) diagnostics test which only takes a few minutes, and this will be able to tell you what the code means as far as which component or part needs service or replaced.
If you cannot drive the vehicle, write the code down and take it to a parts dealer and ask them if they can look up the code, or search Google.com and type in "troubleshoot codes for vovlo s60".
This should bring up a list of websites and services that will better help you resolve this issue.
Please let me know if you need further assistance.
Posted on May 08, 2010
Tips for a great answer:
Feb 14, 2015 | 2000 Volvo S80
Aug 06, 2014 | Volvo 780 Cars & Trucks
Jul 17, 2014 | 2000 Volvo V40
Aug 23, 2013 | Cars & Trucks
Jun 04, 2010 | 2007 Volvo XC90 V8 AWD Sport
May 14, 2010 | 2001 Volvo V70
Sep 15, 2009 | 2002 Volvo S60
Mar 23, 2009 | 2001 Volvo S80
172 people viewed this question
Usually answered in minutes!