Question about 2002 Suzuki Vitara

Open Question

Valve clearance engine g16b - 2002 Suzuki Vitara

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Valve clearance on suzuki vitara 1999 1.6


  • Set the engine to Top Dead Centre (TDC) of the compression stroke for the cylinder to be adjusted.
  • Check the valve clearance. The valve clearance specifications are as follows:

    Intake valves: 0.005-0.007 inches (0.13-0.17mm) Exhaust valves: 0.005-0.007 inches (0.13-0.17mm)
  • After adjustment, tighten the lock nuts to 11-14 ft. lbs. (15-19 Nm).
  • Repeat for each valve to be adjusted.
  • Feb 16, 2017 | Suzuki Cars & Trucks

    1 Answer

    What is the valve clearance of nissan caravan


    Valve lash is the end of the rocker arm and the valve stem clearance between. When the engine is running, due to the thermal expansion and contraction, if there is no gap between the rocker arm and the valve stem, rocker arm swells, the top valve open, the impact of engine power and economy. Engine valve clearance will be different, usually when the car is cold, the intake valve 0.08-0.10MM, clearance exhaust valves 0.10-0.12MM Car Diagnostic Tool

    Aug 26, 2016 | Nissan Cars & Trucks

    2 Answers

    Can a 95 Suzuki esteem engine work with 89 Suzuki sidekick engine parts like the Pistons, rod bearing , and pin


    no at all.
    the 89 sidekick has a G16A engine
    the esteem uses a J18 or G16B engine.

    the G16A parts match G16A parts.
    the B engines, have special pistons, fly cut for valve clearance.
    mixing A and B parts will not work.
    A = 8valve
    B = 16valve
    the J18 is 1.8L and is twin cam and totally different engine.

    why not find a good short block? and build from there?
    in the USA (car is rare )but all G16 blocks can befound
    from 1989 to 1998, a 10 year span on trackers and sidekicks.
    and esteems.
    next time post displacements, so we can know what is there.

    Mar 10, 2015 | Suzuki Cars & Trucks

    1 Answer

    1995 GEO TRACKER ENGINE WITH CRANK SHAFT SENSOR HAS NO HOOK UP WITH MY OLD WIREING HARNESS


    double posted. see other post.
    you need to post what you had and and what you put in.
    the 1995 has no crank sensor. sorry.
    back one post and tell car getting fixed,
    year and engine, and donor year and engines.

    my wild guess, is new engine is 1995 but is it 8v or 16valves.
    you must match the valves.!!~
    the 8v is a one injector engine
    the 16valve is 4 injectors ,and totally different ECU and wiring.

    please id both engines.
    is your car newer than the engine?
    weve done this many times.

    here is G16b for G16b drop. 1997. same for same
    if had 95 G16b going to 97
    id have swapped pans, oil pump and crank sensor.
    onto new engine.
    http://www.fixkick.com/engine/97-motor-pull/HTML/image_47.html

    Feb 20, 2014 | 1995 Geo Tracker

    2 Answers

    Valve clearance 4g13


    make the engine runs for about 30minutes before adjusting the valves,
    valve clearances:
    intake valve = 0.20mm(0.008 in)
    exhaust valve = 0.25mm(0.010 in)
    for reference only when the engine is cold,
    valve clearances:
    intake valve = 0.25mm(0.010 in)
    exhaust valve = 0.30mm(0.012 in)
    engine specs: mitsubishi 4g13 1.3L (if you have same engine)

    Feb 29, 2012 | Mitsubishi Cars & Trucks

    3 Answers

    Valve clearance 4hj1 isuzu engine


    This is the specs for the 4H Diesel engine:
    Intake valves clearance cold 0.4mm(.016inches)
    Exhaust valve clearance cold 0.4mm(.016inches)

    Jan 28, 2011 | 1995 Isuzu Pickup

    1 Answer

    Whats the clearance of suzuki vitara engine tune-up: ___intake/ exhaust____?


    VITARA G16A 88-94 Inlet (mm)0.13 - 0.17 Exhaust (mm)0.16 - 0.20

    VITARA G16B 91-98 Inlet (mm)0.08 - 0.12 Exhaust (mm)0.08 - 0.12

    VITARA J20A 97-98 Inlet (mm)0.08 - 0.12 Exhaust (mm)0.08 - 0.12

    VITARA H20A - H25A N/A

    Dec 08, 2010 | Suzuki Vitara Cars & Trucks

    1 Answer

    Want to know what the valve clearances are for my 1999 hyndai excel


    Adjust the jet valve clearance before the adjustment of the
    intake valve clearance.
    Jet valve clearance (hot engine)
    [Standard value]. . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

    now adjust valve clearance
    Valve clearance (hot engine) [Standard value]
    Intake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 mm (0.006 in.)
    Exhaust. . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 mm (0.010 in.)

    Jul 30, 2009 | 1990 Hyundai Excel

    Not finding what you are looking for?
    2002 Suzuki Vitara Logo

    Related Topics:

    116 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts

    yadayada
    yadayada

    Level 3 Expert

    76070 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Boyet Soriano
    Boyet Soriano

    Level 2 Expert

    293 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...