Question about Cars & Trucks
Forklift will not move forwards or reverse. Everything else works (lights and lift), but it will not move
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
most likely the ign switch is ok if you are getting spark. so you have a hot spark at coil and weak fire at plugs? if you have a test light check the positive side of coil for power when turning key on and cranking. if it is dropping power on positive side then ign switch could be bad. can "hotwire" coil by jumping a wire to positive side of coil to pos of battery this will eliminate ign switch.
Posted on Apr 07, 2010
SOURCE: forklift hydraulics
The Piston seal on the cylinder may need replacing! Otherwise the valve has an eccessive leak rate. The leak rate is normal due to spool clearances although the cylinder shouldnt go down that soon. You may want to check the lift cylinder. As far as negative effects they are minimal other than danger to surrounding things under the forks.
Posted on Apr 10, 2010
Chances are is that the torque converter needs to be replaced. However, the transmssion on this vehicle are only serviceable by transmision shops. No regular mechanic will open up the transmission. When the torque converter fails (clutch and plates shutters to small pieces) the debri flows in the transmision thereby potentially destroying the gears and/or clogging the filter and pump. Go straight to a reputable transmission shop and let them correctly diagnose the transmission.
Posted on Jul 26, 2010
Tips for a great answer:
Apr 27, 2017 | Mazda Cars & Trucks
Dec 23, 2016 | Cars & Trucks
Aug 24, 2016 | Mitsubishi Cars & Trucks
Oct 23, 2015 | Cars & Trucks
Jul 30, 2015 | Cars & Trucks
Jul 26, 2015 | Cars & Trucks
Feb 04, 2015 | Cars & Trucks
Oct 21, 2014 | Cars & Trucks
Aug 14, 2014 | Cars & Trucks
442 people viewed this question
Usually answered in minutes!