Question about Dodge Cars & Trucks
4.7 ROD CAP TOURQUE
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: tourque specks
Is it the rod connecting cap you talking about if so here is the specs 89 lbs (120 N.m) If this it not you are looking for please let me know.
Posted on Aug 25, 2008
SOURCE: piston rod bearings
Hello capybluebloo: The torque specs are as follows. Step one tighten to 10-12 ft.lbs. Step two is to tighten an additional 60-65 degrease. I checked two different shop programs and they both say the same. I hope you have access to a degree meter as the degree is very important. Please leave a rating as to quality of your reply as it does help. Should you need more help just ask. Thank You for using FixYa. Roger
Posted on Apr 16, 2009
Torque in two to three stages.
Connecting rods are 24-26 lb.ft.
Main bearing caps are 41-44 lb.ft.
Hope this helps,Chuck
Posted on Dec 28, 2009
Testimonial: "Thanks for the help Chuck"
go to autozone.com and set up a free account. You will then have access to vehicle repair guides and can get all the info and diagrams you need. Hope this helps!
Posted on Jan 02, 2010
Tips for a great answer:
Apr 24, 2017 | Dodge Cars & Trucks
Mar 25, 2015 | 2002 Chevrolet S-10
May 22, 2010 | 2001 Kia Rio
May 19, 2010 | 1997 Nissan Pickup
May 16, 2010 | 1995 Dodge Dakota
May 27, 2009 | 1999 Ford Taurus
Apr 28, 2009 | 2004 Ford Focus
Apr 21, 2009 | 1999 Dodge Intrepid
Jan 15, 2018 | Dodge Cars & Trucks
21 people viewed this question
Usually answered in minutes!