Question about Cars & Trucks

Open Question

9200i international wiring schematic

I have a 2000 International 9200i and the brake lights stay on all the time even with the key switch off.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
keemo68
  • 1263 Answers

SOURCE: Nissan Altima brake light

what that means is your socket is is probably shorted to your running lights there is a constant feed of voltage to that circuit. i would take a circuit probe and trace a wire to the spot of the short. good luck.

Posted on Aug 29, 2008

Ad
  • 11 Answers

SOURCE: Brake light stays on even when emergency brake is off

try to check the master cylinder in engine comp there should be a switch mounted on the bottom of the cylinder that often leaks and shorts wiring at connector

Posted on Mar 11, 2009

csmock132
  • 4669 Answers

SOURCE: brake and battery light stays on on 2000Nissan sentra

Have you checked the alternator?

Posted on Mar 25, 2009

pippall
  • 1486 Answers

SOURCE: Brake light stays on at all times, ive changed pedal switch

Change the brake light switch.Located at the pedal

Posted on May 29, 2009

  • 1 Answer

SOURCE: 99 Jeep Grand Cherokee Brake light problem

You can adjust the switch by putting your thumbs on either side of the switch plunger and pushing toward the brake lever. The switch shaft will ratchet into the new position which is will then be depressed by the brake lever when it is the brake is not being depressed.

Posted on Jun 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm looking for a wiring diagram for a 1972 International UTE Liner Motorhome. Or help with an ignition switch that is overheating and break lights/turn signals quit at same time.Thank you in advanced


Type your question in Google click images and you should find it somewhere on there. Just write year and vehicle model then type wiring diagrams. If fails write again what I said but instead of wiring diagrams type schematics, good luck

Apr 12, 2016 | Cars & Trucks

2 Answers

Replace my brake switch on my 2000 Dodge ram pick up and my brake lights still don't work


Brake switch must be adjusted such that it is depressed with pedal up and released as soon as pedal is slightly depressed.

Feb 26, 2015 | Dodge Cars & Trucks

1 Answer

How do I repair the brake light circuit on a 1994 International 4900?


check the switch at the top of the brake pedal, as could just need adjusting , screw down a turn at a time and recheck until lights come on

Nov 04, 2014 | Cars & Trucks

1 Answer

Stop light on at all times even when engine is


if your talking about the rear brake lights then you probably have a stuck or bad brake light switch, as the switch is always powered up even with the key off on one wire and only supplies power to the 2nd wire on the switch to the lights.

Oct 11, 2014 | Cars & Trucks

1 Answer

Break and battery light stays on all the time


sold all over earth, what country> we cant guess this....
don't break the brakes....!!!
my guess, you meant the
brake lamps are on keys in pocket. and the battery lamp is dash(charge) glows, keys in pocket. right?
and battery cable kills all this illegal states above. sure.

86 nissan PU.
720 PU>? Datsun>?
or D21 Nissan ( 1986 Dat-SUNS became NISSANS. in USA)
Model years 1986.5 (second half) and later were called Nissan Hardbody Trucks, chassis code D21.

D21 are called HARD BODY trucks. mid year changes.
so???? which is yours.

as you might not ,know , the models are wired diffrent by different exact models and country.
long ago , i had the 86 with the VG30 V6...

so i will roll the dice and answer for
D21
ok?

things off stay on, 101
bad wiring, hacked in wiring, radios,alarms and other things.
all can cause this..... its old and is common on old cars.
but if wiring is not hacked, (id see that in 10seconds in person)
no hacks.
gas engine car not diesel.
USA 86 body
brakes
Im looking now at the schematic and this car has a hot at all times
brake lamp switch. (foot pedal switch)
SO only a bad switch can cause this.... period
now the dash charge (battery ) light stuck on.


my online source ,has the alternator system missing.
so can not comment.
the lamp gets its power from the key switch
if the key switch fails , all warning lanps glow not just the
charge.(battery)
so its not that
my best guess is wiring errors, that put power the the cluster
key off. id bet that is it .

wiring errors to the ignition output is side, key switched power is failing.




Jul 14, 2014 | 1986 Nissan Pickup 4WD 1986

1 Answer

Wiring diagram international 4300


the brake light switch will be in the side or base of the foot valve . It is air operated and activates when the foot brakes are applied . It should be about 1 1/4 " in diameter with 2 wires to it

May 06, 2014 | Cars & Trucks

1 Answer

The internal lights stay on. I've checked the door switches and they're ok.


You might want to check wires (backside of switch(s)) to see if any have crossed or try disconnecting each switch, one at a time - possible internal short. If all else fails download this: Rave man. It has wiring schematics - http://www.landroverresource.com/

Mar 03, 2011 | 1997 Land Rover Discovery

4 Answers

With the ignition off, the rear tail lights won't turn off


hiya if the rear lights are remaining on ? with no ignition it will be the brake lights staying on this is easily remendied/ checked by trypulling the brake pedal up by hand and see if lights go off ? if so then you will need to adjust the b/light switch which is positioned adjacent to pedal and can be screwed inwards towards the pedal untill the plunger on switch is pushed into the switch which puts lights off ensure pedal is fully up then adjust switch reconnect the wire/plug and press pedal slightly to ensure b/lights operate ok and then go off with pedal released ? on hyundai the brakelights do not req ignition on to operate hence more likely problem is as above good luck

Oct 10, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...