Question about Cars & Trucks

2 Answers

Pionion on 95 ford t-bird - Cars & Trucks

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,036 Answers

Pinion gear or pinion seal. if you talking about pinion seal you need to safely raise support rear of vechicle using jack stands. you need to mark the drive shaft and companion flange for remember realignment during the reassembly then remove then remove the drive shaft. you need a inch pound torque wrench measure record torque required to turn pinion nut through several revolutions.reason for this procedure so you can preload pinion bearing nut to the right torque.you have to remove pinion nut before you can remove pinion seal.you need puller remove pinion flange from pinion shaft. then you need large screw driver or seal remover tool can buy one at any auto parts stores. you can use a large socket to install pinion seal. then visa versa you put every thing back in place you are done.

Posted on May 01, 2013

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 76,070 Answers

What is the question here??

Posted on May 01, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 76070 Answers

SOURCE: Have a 95 ford thunder bird at idle the engine has aalmost like a skipping vibration what could this be pretty sure it's firing on all 8

It sounds like a engine ignition misfire to me, have the plugs and plug wires been replaced? If not replace them taking care to route the plug wires exactly as the factory did, replace any broken loom holders for the plug wires, this is very important.

Posted on Sep 04, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 95 ford t-bird 4.6 when idling around 600 rpms when shift , or give gas it hesitates. i believe idle air control valve?? i have cleaned egr valve and no vacuum leak also new tps whats your take on...


tap on idle valve or take off and clean a new one is not that expensive also very often replaced part on fords hesitation prob plugs or wires

Sep 21, 2013 | Cars & Trucks

1 Answer

Have a 95 ford thunder bird at idle the engine has aalmost like a skipping vibration what could this be pretty sure it's firing on all 8


It sounds like a engine ignition misfire to me, have the plugs and plug wires been replaced? If not replace them taking care to route the plug wires exactly as the factory did, replace any broken loom holders for the plug wires, this is very important.

Sep 03, 2012 | Ford Cars & Trucks

1 Answer

Do 95 thunder bird have side way motor


No. They do not have transverse mounted engines. These years of the T-Bird were still rear wheel drive. Most came with 302 v8.

Aug 27, 2011 | 1995 Ford Thunderbird

1 Answer

Need a diagram for the spark plug firing order, for a 95 Ford Thunder Bird, V8


mcdevito75 here, Most Stores that sell parts can give you this diagram, or your loxal library may have a repair manual with the proper diagram.

Jun 17, 2010 | 1995 Ford Thunderbird

1 Answer

Can a 95 ford t-bird alternator fit on a 01 grand marquis


maybe you might have to change pully if one is cord other groove also check the amps on it!!!!

Dec 23, 2009 | 2001 Mercury Grand Marquis

1 Answer

When i turn the key to start my 95 t bird its just clicks.its not the starter what eles can it be


a low battery will cause this problem. Put it on charge or boost vehicle.

Oct 27, 2009 | 1995 Ford Thunderbird

1 Answer

The Clutch on My 1994 T-Bird does not Engage at All...


i have a 95 check the freon level make sure its full 1 lb isnt enough to change the temp in the car but its enough for the sensor to make it stop running the relay is in the fuse box under the dash and on some models its in the black box under the hood

Jun 29, 2009 | 1995 Ford Thunderbird

1 Answer

Diagram of the firing order 95 t-bird


1995 Ford Thunderbird
3.8 liter V-6

1069ac8.gif
1995 Ford Thunderbird
3.8 liter SC V-6

23ea1d2.gif
1995 Ford Thunderbird
4.6 liter SOHC V-8

56e90e1.gif

Mar 23, 2009 | 1987 Ford Thunderbird

1 Answer

Engine Codes


you can use a regular obd 2 code reader on that 95 tbird.get one at autozone and follow their directions. the plug is under the dash on the passenger side below the glove box.

Sep 20, 2008 | 1995 Ford Thunderbird

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...