Question about Ford Bronco

1 Answer

1986 bronco left taillight

I have a 1986 bronco left taillight doesnt work. replaced bulbs and fuses. all other lights work including turn signals . the light works for the turn signal/brake but not when im just turning on my lights ...please help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 21,873 Answers

If you are not getting power from the headlight switch for that circuit, but the other side works, you'll have to trace the wiring. The socket has two wires plus a ground. One wire is for the tail lamp circuit and the other is for brake-turn signal.

Posted on Apr 30, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 188 Answers

SOURCE: 2001 dodge ram 1500 brake lights

I would guess the brake fuse ( this does not use the same fuse as the tail lights/blinkers) or the ground for the brake light bulb.

Posted on Aug 22, 2008

  • 141 Answers

SOURCE: left rear turn signal and brake light dont work

You have a broken wire to the turn/brake light portion of the light as they use the same wire. Or where the plug goes into the light assy could be bad. Torsion mount lights are horrible and you should think about replacing with a universal light that you can wire direct.

Posted on Feb 17, 2009

cadman000
  • 607 Answers

SOURCE: bottom brake lights and hazard lights do not come on. All other lights work including top brake lights. Fuses and bulbs checked.

Check for power out of brake light switch by brake pedal. Of its faulty , the 3rd brake light will still work. Hope this helps

Posted on May 23, 2009

  • 2 Answers

SOURCE: Brake light, Turn signal not working rear right 06' Focus

I have a 2000 ford focus no brake lights. with the brake lights the transmission would not go into drive .replaced the brake light switch checked fuse replaced turn signal switch with no results then i moved onto the wiper switch and replaced it as much to my supp rise it fixed the problems

Posted on Aug 06, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The left tail light on my trailer doesnt work.the stop and turn signal works . is there a fuse for it? i have 2011 gmc sierra 1500


There is a tail lights fuse for the truck, but not for the trailer.
First, check that your left tail light on the truck is working, if not fix the problem (new bulb, bad contact, fuse).
Then the obvious suggestions regarding the trailer are: Check the tail light portion of the bulb to be sure it is not blown. If good (best to put in new one to be sure), then check the wiring from the front of the trailer all of the way to the non working bulb, including every connection and at any place it is secured to the trailer frame. If all is good with the trailer circuit and bulb, then check the truck's trailer connector, including any adapters. If by chance the truck is wired with a flat 4 wire harness the problem may be solved (but usually the blinkers are the problem). Modern trucks require a 5 wire harness which self adapts to the standard 4 wire trailer circuit. Check for dc power (12 volts) from the truck's female connector. One wire will be ground, others will be taillights (turn on headlights), brake lights (have someone press brake pedal), and blinkers (turn on switch and blinkers).

Oct 09, 2016 | 2011 GMC Sierra 1500

2 Answers

69 turn signal problem left turn signal not working. right turn signal causes both to falsh


it's the grounds if they're both flashing fast it's definitely grounds take a test light and see if its got power goes through the test light grounded to the frame and if the light comes on then it's definitely your grounds

Jul 29, 2014 | 1969 Pontiac Firebird

1 Answer

Taillight fuse location


ARE YOU SURE THERE ISNT TWO BULBS ONE FOR TAIL LIGHT AND ONE FOR BREAK LIGHT

Apr 26, 2014 | Chevrolet Silverado 2500HD Cars & Trucks

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

I have a 1997 voyager. I just replaced the tail light bulbs including the brake light bulbs. the brake light switch was just replaced also. the left and right brake light do not work but the center one...


back to the brake light switch, power goes from the switch to the signal switch then to the taillights, the center light works on a different switch

Nov 17, 2010 | 1997 Plymouth Voyager

3 Answers

I have a 1989 Buick Park avenue. A month ago all of the back lights stopped working. Tail lights, brake lights, reverse lights.


Check your fuses underneath the drivers side steering wheel. Flip the plastic cover over and there will be a diagram showing the fuse that controls the taillights/stoplamp. Pull the fuse out and replace it with the same number fuse and your taillights and brake lights will work again. If the fuses are ok, pull each taillight bulb out and replace it with a new bulb. Sometimes when one light bulb fails, all of them will fail.

Aug 01, 2010 | Buick Park Avenue Cars & Trucks

1 Answer

When I turn on turn signals (left or right it


sounds like one of the circuit bords at taillights is bad

Aug 03, 2009 | 1996 Chevrolet Tahoe

4 Answers

Dashlights and temperature dash lights not working


Turn on your headlights and check to see if your taillights are working. They act as a fuse to your dashlights, its a safety thing

Nov 11, 2008 | 1986 Toyota 4Runner

1 Answer

1986 Ford f150 rear lights


I can send you a copy of the diagram but I will need an email address, so let me know if you still need it

Oct 04, 2008 | 1986 Ford F150 SuperCab

1 Answer

Brake lights


If all of the wiring, fuses, bulbs, and switches are good (which is what it seems since everything else works fine including the turn signals on the passenger taillight), sounds like it may just be a bad socket. I have a somewhat similar problem on a 1986 F150.

Jul 27, 2008 | 1984 Ford F 150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...