Question about Citroen C8
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you drive your car more likely for short distances then engine will not get hot enough to start the regenerating process to clean the cloged particulate filter resulting in a antipollution fault.
Drive your car to a motorway or empty dual carriage way (best in nights). The temperature meter should be showing above 60°C when you begin with this process. Place 3rd gear and drive your car at 3000-3500 rev /min for 15 to 20 minutes to let the ecu to kick the regeneration process. Keep driving car for 15 minutes in this state will be enough to clean your catalytic converter and your problem will be solved. But if it doesn't then the problem is with your catalytic converter and more probabily you need to change it.
Posted on Feb 10, 2010
its in series in the exhaust system, but check you have particulate fluid in the vehicle first before replacing the filter
Posted on Jun 24, 2010
Hi i think the problem is one of the coils ( very common on renaults ).
The shaking is the engine missfiring.
Because of the missfiring the emissions are not correct which brings on the engine light.
If you are able to get a diagnosis ( code reader ) done on the car it will tell you which coil is gone
I hope i have been of some help to you
John ( South Wales UK )
Posted on Jun 14, 2011
Tips for a great answer:
Mar 19, 2017 | Citroen Cars & Trucks
Nov 01, 2016 | Cars & Trucks
Nov 17, 2015 | Cars & Trucks
When the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.
Nov 04, 2012 | 2008 Citroen C-Crosser HDi
Injectors from the same ccm engine are most probably sounds same but to be on the safe side check not only the shape but code on the top of injector too. Because they are piezo effect injectors and set by the manufacture for a specific pressure for specific engine codes.
Sep 12, 2012 | Cars & Trucks
Mar 16, 2012 | 2007 Peugeot 207 CC
May 01, 2010 | 2005 Peugeot 405
Sep 15, 2009 | 2005 Peugeot 405
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: