Question about Cars & Trucks

Open Question

What is dodge caravan code p 168.4

Brake light remains on, code P 168.4 appears in the odometer

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 422 Answers

SOURCE: Why does the brake light indicator turn on occasionally?

the switch on the parking brake is defective

Posted on Aug 25, 2008

  • 1214 Answers

SOURCE: 2002 Dodge Ram 2500 4x4 Brake & ABS lights stay on

I would still be suspect of the ABS module. Had the same thing happen on an 01 Tahoe.

Search the web for an ABS repair facility located in Russia, IA. They repair the module for $150.00 and give a 5 year warranty, which you can't get from the factory.
And, their website has troubleshooting guides to help you determine if for certain the module is bad or has a probelm.

You can remove the module and continue to drive the vehicle. Their turn around is as they state, and once I had them make the repiars, my Tahoe has been up and running great!

Posted on Jan 25, 2009

  • 74 Answers

SOURCE: dodge ram1500 brake light abs light spedometer odometer no work

you should have your vehicle scanned with OBDII.(on board diagnostics) . take it to a shop and tell them your engine light is on and they'll hook a computer to it and find out why

Posted on Feb 17, 2009

  • 7 Answers

SOURCE: 2005 dodge caravan engine light code p 441

If you mean code P0441 - This Relates to Incorrect Purge Flow for Evaporative Emission System

Posted on Aug 16, 2009

  • 1 Answer

SOURCE: 2004 Dodge Ram 1500 pickup speedometer and odometer quit

I am having the same problem. I replaced the speed sensor on the rear diff. and the problem went away but when i started it the next day the problem came back. If you figure it out let me know.

Posted on Nov 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 dodge caravan tail lights won't go off


It's probably the brake lights that are remaining on, because the brake light switch is damaged or your brake pedal is not returning to the full up position. If your pedal is coming back up all the way, you need to replace the brake light switch. It is located under the dash and you should see it move as you move the brake pedal down and up.
See the link starting at about 4:30 to see how to replace the switch (the first part of the video is about changing bulbs). Replacing brake light switch on 2002 Dodge Caravan

Apr 20, 2017 | 2000 Dodge Caravan

1 Answer

9A5CAP appear on the odometer of a 2007 dodge caravan what does 9A5CAP mean ?


Gas cap could be loose, check that. Then you need to have code cleared with a scanner. Autozone may do it for free.

Jun 23, 2015 | 2007 Dodge Caravan

1 Answer

Need 2000 dodge grand caravan manuel. The dash instrument panel stopped working after a battery replacement. The light work. The tach and speedometer are pinned all the way to the right. ?


Digital Odometer??
Try this procedure and let me know if this worked for you. I have done this several dozen times and it helped reset the Instrument Cluster.
1. With the Key IN the Ignition and in the OFF (not On or Start)Position
2. Push in and hold-in the Trip Odometer Reset button.
3. When "sof 4.0" appears: release the Button and WAIT.
4. There maybe some "E" Codes that may appear.
5. Continue to let the System run its course. There should be a great light show on the dash along with the Tach and Speedometer needles dancing all over the place.
6. In about 30-seconds it will complete it's reset cycle.

Again let me know if this helped, or if you have additional information or questions REPLY in the Comments Section of this Post.

Jan 29, 2010 | 2000 Dodge Grand Caravan

2 Answers

How do i access check engine light codes on a 2009 Dodge Grand Caravan without a scanner


try this. set the parking brake firmly, then turn the key from off to on 3 or 5 times, if this doesn't work try the same thing with the gear selector in Neutral,the codes should read out on the digital odometer

Jan 23, 2010 | 2009 Dodge Grand Caravan

1 Answer

By turning the key on and off does not pull engine codes in 2001 dodge the system has changed


With the battery connected?
With a Digital Odometer: Turn the Key from Off to On (not start) three (3) times, On the third (3rd) time leave it in the On (not start) position. The Codes will appear in the Digital Odometer Screen. When it is finished it will show "PdonE".
It is on the 2001 Dodge Caravan.
Without a Digital Odometer?
Turn Key the same way and leave the same way.
Watch the Engine Light (yellow) and count and record the blinks. Do it a few times to get the count correct.
These are 2-digit numbers. The last set is 5-blinks and 5-blinks indicating that it is complete.

Jan 01, 2010 | 2001 Dodge Caravan

1 Answer

How to fix the of my car no tach no speedometer no signal light dodge caravan 2002


1. Check the resistance of the Output Shaft Speed (OSS) sensor. It should be 300-500 ohms.

2. If the resistance is out of range, replace the sensor. 1. With the key in the Lock position, push in and hold the trip odometer reset button until the word Sof and a number show up in the odometer display. This is the software version number of the cluster.

2. Release the button and the cluster will display codes in the odometer and run through the calibration points with the gauges.

3. Note any codes.

4. The cluster will exit the calibration when the word End is displayed on the odometer.

Oct 21, 2009 | 2002 Dodge Caravan

1 Answer

Engine malfunction light


To check why the light is on apply your parking brake and cycle the ignition switch on-off for at about 3-5 times. In your odometer window you will see the code (Usually the letter "P" followed but a four digit number). You can also take your van to a local auto parts store and they usually can plug in an OBDII scanner and pull the codes for you for free.

Jun 28, 2009 | 2005 Dodge Caravan

3 Answers

2003 dodge caravan


To check the code for the engine light without OBD tools for dodge caravan is to switch on the key 3 times without starting the car and you will see the code displayed on the Odometer display. Then check for the document what king of engine problem for that code.

Nov 05, 2008 | 2003 Dodge Caravan

1 Answer

Odometer and speedometer stopped working after I had to brake hard and blew my horn. engine light came on also. 69k miles on van.


Run a computer system check for trouble codes, if the chk eng lite is on there will be a code, it may be the speed sensor, if it is then that will be the cause of the speedo problem.

Oct 14, 2008 | 2000 Dodge Caravan

1 Answer

Emergency brakelight/ABS light remains on.


You have fault in your abs/traction control system. You need to find a shop that can read the code for you before I can give you any more information on this problem.

Jul 26, 2008 | 2002 Dodge Caravan

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...