Question about 2004 Honda Civic

1 Answer

I just got my car scanned and a few codes pop up

I am getting these codes popping up on my scanner p0130,p0505,p1491,p0100,p1606,p1607,p1608,p0966

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 950 Answers

Error Code: P0130
Fault:
Oxygen Sensor (O2S) 1, Bank 1 - Circuit Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) Triggered on first occurrence.
-Wiring harness.
-Oxygen sensor (O2S).
-Engine control module (ECM).

Error Code: P0505
Fault:
Idle Speed Control (ISC) System - Malfunction
Possible Cause:
-Wiring harness.
-Idle speed control (ISC) actuator/Idle air control valve (IAC) valve.
-Throttle motor.
-Throttle valve tight/sticking.
-Engine control module (ECM).

Error Code: P0100
Fault Location:
-Mass Air Flow (MAF) Sensor/Volume Air Flow (VAF) Sensor - Circuit --Malfunction
Possible Cause:
-Wiring harness.
-Mass air flow (MAF) sensor.
-Volume air flow (VAF) sensor.
-Engine control module (ECM).

Error Code: P1491
Fault:
Exhaust Gas Recirculation (EGR) Valve Insufficient Lift
Possible Cause:
-Wiring harness.
-EGR Valve.
-ECM

Error Code:P1607
Fault:
-Engine Control Module (ECM)/Powertrain Control Module (PCM)

Error Code: P0966
Location:
-Pressure Control (PC) Solenoid B - Circuit Low
Possible Cause:
-Wiring short to earth.
-Pressure control (PC) solenoid.
-Engine control module (ECM)/Powertrain control module -(PCM)/Transmission control module (TCM) .


Posted on Dec 29, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"i have a 97 plymouth breeze, just bought it,the guy i got it from pop the eng light out.so i have a OBD reader,the codes are PO743-- TORGUE CONVERTER CIRCUIT ELECTRICAL, THE OTHER CODE IS P1491--...


P0743 Torque Converter Clutch Solenoid Circuit Electrical
P1491 Radiator fan relay control circuit
if all drives ok leave well alone its only a old banger and not wirth spending money on

Nov 30, 2013 | Cars & Trucks

1 Answer

M y odyssey scanned P1607


Google the codes

OBD Code P1607

Aug 22, 2013 | Cars & Trucks

1 Answer

2008 dodge caliber code p1607


Not a common code. please read.
See the dealer on this, it is a warranty issue.

Jun 15, 2012 | 2008 Dodge Caliber

1 Answer

Transmission code P1491


Please check the code or you may have it re-scanned. Some shops would let you borrow their scanner. The problem is with the cooling fan. It may be a bad relay or the circuit itself or the wiring may be bad.

Sep 26, 2011 | 1999 Jeep Cherokee

1 Answer

I have trouble starting my van and later on the check light came on (P1607). The car can no longer start but sometimes when I fiddle with the battery it would start up again and when it does it runs fine....


P1607 means "powertrain control module (PCM) internal circuit malfunction". According to the factory service manual, a low battery condition can cause this. This code can also pop up after the battery has been jump started.

You need to reset the PCM. To do this, turn the ignition switch off. Remove the No. 13 fuse (7.5Amp) from the passenger's under dash fuse/relay box for at least 10 seconds. Put the fuse back in. That should complete the reset.

Now to check again for the code: turn the ignition switch to on (not start.) Wait 30 seconds. If the check engine light stays OFF, turn the ignition switch off and wait 10 seconds. Turn the ignition switch back to on (not start). Wait 10 seconds. If the check engine light stays OFF, you had an intermittent fault and it has now been reset--everything is fine. If the check engine light comes back on during these checks, have the code that set read out. If the code is P1607 again, then you may have to have the PCM tested at the dealership for an internal fault.

Feb 04, 2011 | 2002 Honda Odyssey

1 Answer

P1646 how much to repair


P1512 Throttle Position Sensor Idle Switch Sense Circuit

P1513 Throttle Position Sensor Idle Switch Sense Circuit

P1514 Park/Neutral Position Switch High Load Neutral/Drive

P1516 Gear Change Park/Neutral Malfunction

P1517 Engine Cranking Park/Neutral Malfunction

P1607 MIL Output Circuit

P1608 Automatic Transmission

P1609 Internal ECM Error

P1641 Fuel Pump Relay No. 1

P1646 Fuel Pump Relay No. 2

P1739 Automatic Transmission

P1775 Transmission Control Module MIL Circuit

P1776 Torque Reduction Request Signal

P1777 Torque Reduction Circuit

P1780 Automatic Transmission

P1781 Automatic Transmission

P1782 Automatic Transmission

P1783 Automatic Transmission

P1785 Automatic Transmission

P1790 Automatic Transmission

P1791 Automatic Transmission

P1792 Automatic Transmission

P1794 Automatic Transmission
P1796 Automatic Transmission
as you can no such code exists for a jaguar ,contact code reader manufacturer

Jan 03, 2011 | 2004 Jaguar S Type

1 Answer

What could cause reduced motor power light on and really reduce tha power of the motor ?


A few things could. I'd take it to Autozone or some place that will scan your car with an OBDII scanner for free. Would like to know what codes are popping up to give us a clue. 1 thing I've seen is chaffed wires in the main wiring harness causing problems. Another popular one is a bad gas pedal positioning sensor or pedal assembly. Also a transmission controle module. See what codes pop up and we can go from there.

Dec 19, 2010 | 2004 GMC Envoy

1 Answer

Received a P0136 code error and replaced 02 sensor #2, now vehicle will not start and now showing a P0100 & P0505 code.


P0100 OBD-II Trouble Code

Technical Description

Mass Air Flow (MAF) Circuit Malfunction

Basically this means that there's a problem with the Mass Air Flow (MAF) sensor or circuit.

You will likely not notice any serious driving problems, but there may be symptoms like a general decrease in power or sluggishness.
Causes

A code P0100 may mean one or more of the following:

* The MAF may be disconnected, or a wiring connection may be bad.
* The MAF sensor may be faulty.

Possible Solutions

Use an OBD II Reader (or go tou your local parts store and they will for free) and reset the code and see if it comes back.
Then start with the cheapest, easiest repair procedures:

* Check the Mass Air Flow Sensor wiring/harness is connected properly and that there are no broken / frayed wires.
* Unplug and reconnect the MAF wiring harness a few times to clear the contacts.
* Check the voltage of the MAF sensor (refer to a repair manual for vehicle specific information).
* Replace the MAF sensor.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
@@@@

Jun 02, 2010 | 1996 Mitsubishi Galant

2 Answers

I HAVE A 2004 HONDA ODYSSEY THE CHECK ENGINE LIGHT CAME ON, THE CODE THAT CAME UP IS P1607 PCM INTERNAL CIRCUIT FAILURE COULD ANYONE PLEASE TELL ME WHAT THAT CODE IS?


this code can sometimes set due to low battery voltage. find the cause of the low battery voltage(this code usually pops up after a car is jump started or the battery is replaced or gone bad). clear the code. if it returns, then yes, the pcm will need replaced.

Jan 05, 2010 | 2004 Honda Odyssey

1 Answer

Hi, my 1996 mercedes E200 has quite few electrical problems,. scanner pulled out following fault codes: p1584, p1580, p0100, p0130, p0370, p0110.. please help :)


P0100 OBD-II Trouble Code

Technical Description

Mass Air Flow (MAF) Circuit Malfunction

Basically this means that there's a problem with the Mass Air Flow (MAF) sensor or circuit.

You will likely not notice any serious driving problems, but there may be symptoms like a general decrease in power or sluggishness.
Causes

A code P0100 may mean one or more of the following:

* The MAF may be disconnected, or a wiring connection may be bad.
* The MAF sensor may be faulty.

Possible Solutions

Use an OBD II Reader (or go tou your local parts store and they will for free) and reset the code and see if it comes back.
Then start with the cheapest, easiest repair procedures:

* Check the Mass Air Flow Sensor wiring/harness is connected properly and that there are no broken / frayed wires.
* Unplug and reconnect the MAF wiring harness a few times to clear the contacts.
* Check the voltage of the MAF sensor (refer to a repair manual for vehicle specific information).
* Replace the MAF sensor.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jun 04, 2009 | 1999 Mercedes-Benz E-Class

Not finding what you are looking for?
2004 Honda Civic Logo

504 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...