Question about Cars & Trucks
The problem with the temp control panel is likely to be a bad earth causing high current draw. Most of these panels have lights ,which obviously need power, these can heat up to quite high temperatures. So, I would have a good look at the electrics behind the panel.
Posted on Apr 30, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i would have to say to check for a relay in your fuse boxes for power steering pressre switch or it may have its own police pkgs have a lot of relays due to all the extras
Posted on Sep 11, 2008
SOURCE: 1996 crown victoria has no heat
i think it is the heater control valve i think it is mounted on the firewall by the top close to the hood it will have two black 5/8 hoses attached to it check and make sure it still has the cable attached to it before you replace
good luck here is the (how to) for your car
The heater control valve (sometimes called the water flow valve)controls the flow of coolant into the heater core from the engine.
Heater control valves are operated in three basic ways: by cable,thermostat, or vacuum. Cable-operated valves are controlled directlyfrom the heater control lever on the dashboard.
Cable-operated heater valve used to control the flow of water or coolant through the heater core.Thermostatically controlled valves feature a liquid-filled capillarytube located in the discharge air stream off the heater core thatsenses air temperature and modulates the flow of water to maintain aconstant temperature regardless of engine speed or temperature. Mostheater valves utilized on today's car are vacuum operated. These valvesare normally located in the heater hose line or mounted directly in theengine block.
To replace a heater control valve:
Identify the heater control valve carefully. It is easily confused with other parts.
Posted on Apr 23, 2009
i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!
Posted on Jul 07, 2009
you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,
Posted on Oct 06, 2009
Is the same trans the only thing different on a police package is a better suspension and the ECM is program different so it could have more RPM and the trans will shift difrent. but is all in the ECM.
Posted on Jan 10, 2012
Tips for a great answer:
Aug 10, 2016 | Cars & Trucks
Nov 03, 2015 | Cars & Trucks
Sep 30, 2014 | 2006 Ford Crown Victoria
Nov 17, 2013 | 2000 Ford Crown Victoria
Mar 23, 2013 | Ford Crown Victoria Cars & Trucks
May 30, 2012 | Cars & Trucks
Mar 22, 2012 | 2001 Ford Crown Victoria
Dec 14, 2010 | Ford Crown Victoria Cars & Trucks
Oct 05, 2009 | 2000 Ford Crown Victoria
Jul 07, 2009 | 1999 Ford Crown Victoria
71 people viewed this question
Usually answered in minutes!