Question about 1999 Nissan Altima

Open Question

Pvc location 2.4 liter engine

Need to replace pcv

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: nissan pickup 1994

the pcv valve is behind the alternator between the alternator and oil filter. when you remove the oil filter you can see the pcv in the intake manifold. best way to get to it is through the pass side fender under the rubber mud flap thats between the wheel and engine.

Posted on Jun 03, 2009

  • 3640 Answers

SOURCE: 2006 Nissan Frontier 2.5l PCV valave location

http://www.clubfrontier.org/ please go to this site. it is a lenghy job on this vehicle.when page comes up, just type in on left top of page--- pcv replacement on 2.5. good-day !

Posted on Apr 12, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the pcv valve located on a 88 ford ranger with a 2.0 engine


It should be on top of the VALVE COVER PULL HOSE AND PVC VALVE IS AT END IF IT IS NOT MAKING A NOISE WHEN YOU SHAKE IT REPLACE IT

Oct 01, 2014 | 1988 Ford Ranger

1 Answer

Where is the pvc hose on a 99 ford explorer


Randallalt@aol.com U have v8 ? PCV is located ,drivers side rear totally to rear and down of value cover , behind the head , use mirrors to see black hoses! Use caution when pulling on hoses apart ! Pull hose off larger end of PCV ,start engine , place finger over PCV , if suction is good of PCV no need to replace pcv (unless pcv is oil soaked.). Reconnect hoses . Good luck

Mar 26, 2013 | 1999 Ford Explorer

1 Answer

Where is the pcv valve located on a 2009 v6 jeep grand cherokee


either in one of the 2 valve covers or somewhere on the intake..do this.. follow the vacuum hoses from your brake booster, back to the engine and there should be one that enters the engine somewhere and its got a small connector just before the engine..thats the pvc valve..

Feb 07, 2013 | 2009 Jeep Grand Cherokee

2 Answers

Also, where is the pcv valve located?


pcv valves are generally located on top of the engine's valve cover. A tube made of rubber generally goes to it.

Jul 05, 2010 | 2003 Toyota ECHO

2 Answers

Looking for pvc valve on3.3/6cly 1990 buick


The PVC Valve is located on the valve cover of your engine.

Jun 16, 2010 | 1990 Buick Century

1 Answer

How to replace a PCV in a 2000 Ranger 4.0 liter also its exact location.


THE PVC IS LOCATED ON THE TOP DRIVERS SIDE OF THE ENGINE IT HAS A RUBBER HOSE ATTACHED TO IT AND IT PULLS RIGHT OUT ITS ABOUT A 2 INCH CYLINDER WITH A HOLE IN THE BOTTOM TO MANAGE AIRE FLOW.IT IS PUSHED IN THE COVER.

Feb 21, 2010 | 2000 Ford Ranger SuperCab

2 Answers

Replacing pcv valve on 2002 Chevy Silverado 2500 HD Vortec 6 Liter engine


driver side valve cover in the back of the cover. if it even has one, sometimes the cover has been replaced with a later style that uses a baffle instead of a pcv

Jul 01, 2009 | 2002 Chevrolet Silverado 2500HD

1 Answer

PVC valve location


#10 is the PCV valve.
b8fe447.gif

May 05, 2009 | 1999 Ford Contour

1 Answer

2002 saturn sl1 pcv valve


The PVC valve is located in the valve cover (top "cover" of the engine, near the oil filler cap) On DOHCs, it is immediatly to the right. On SOHCs, it a few inches to the left.The PVC valve is held to the valve cover with a rubber grommet type seat.

1. Remove the hose that connectes the throttle body unit to the PVC valve.
2. Using your hands, remove the PVC valve from the rubber seat. Wiggle it back and forth, then pull it straight out.
3. You can either clean this with carb cleaner, or simply replace it with a new one (<$5 at most auto stores)
4. Put the PVC valve back into the rubber seat and replace the hose

Apr 08, 2009 | Saturn Vue Cars & Trucks

Not finding what you are looking for?
1999 Nissan Altima Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14251 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...