Question about Cars & Trucks

Open Question

Clark tm15 FORKLIFT

Hydraulic breakes not working properly

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11028 Answers

SOURCE: Old Clark forklift will not fire

Or propane ?

Posted on Aug 16, 2015

  • 391 Answers

SOURCE: Clark forklift will not fire

Remove the distributor cap, remove the rotor, turn the ignition on, turn the motor until the points (contact breaker) starts to open, you should see a spark, if not, turn off the ignition, check to see if the contact surfaces are flat and not pitted. gap should be 0.35mm (15 thou) adjust if neccessary, clean the contact surfaces with some fine sandpaper. Turn the motor until the points are closed and turn a little more. Turn the igition on. With a small screwdriver, open the pionts without the screwdriver touching anything else. you should see a spark. Replace the rotor & cap. The engine should start provided fuel is getting to the carburettor and the coil is ok. Hope this helps, please comment and avise.

Posted on Aug 16, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have matbro ts 300 telehandler forklift -hydraulic is being trapped somewhere engine slowly bog down to stop.


off hand --check for a failed oil filter in the hydraulics blocking the return lines from the pump and valves

Mar 07, 2016 | Cars & Trucks

1 Answer

I have a TCM Propane forklift model fg20n1 and I am having issues with the hydraulic system when its cold out. I am assuming the power steering is run off the hydraulic pump and it works fine but the


Bummer deal! You may need to use a product from Mega Power to clean and free the units hydraulic sticky valves that tar up when cold. You're right, new fluid is not meant to be potent. You simply add this valve treatment to the fluid. Results are fast - like under 45 minutes in a grader it was installed in. This product uses chemical cleaners that work like penetrating oil - not solvents like part stores and supply places sell. Try the link below, but what it says for transmissions apply 100% to your hydraulic system. My son uses several diggers and tractors in his commercial plumbing business. Once he got on to Mega Power benefits he found it best to start adding Mega Power to his new equipment engine transmission and hydraulic systems - as Mega Power keeps those valves, gears, and pistons clean in a dirty environ he claims. He never has had downtime repairs for sludge or wear out since he started adding this product. This may be the easiest and cheapest way you will find to end your cold operation. Of course, you can pay a mechanic to take apart and hand clean those sticky parts as a fix. Mega Power ends transmission jerk transmission converter lock up jerk

Nov 05, 2014 | Cars & Trucks

1 Answer

Clark forklift 3 ton movmenet problem


check hydraulic fluid levels/ filter..also look for any leaks near the valve controls and such..is this a gas powered one or an electric one..

Dec 22, 2013 | Cars & Trucks

2 Answers

Forklift hydraulics


The Piston seal on the cylinder may need replacing! Otherwise the valve has an eccessive leak rate. The leak rate is normal due to spool clearances although the cylinder shouldnt go down that soon. You may want to check the lift cylinder. As far as negative effects they are minimal other than danger to surrounding things under the forks.

May 11, 2009 | 2000 Alfa Romeo 156

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...